On Tue, 31 May 2011, Koen Kooi wrote: > > Op 31 mei 2011, om 15:42 heeft javier Martin het volgende geschreven: > > > On 31 May 2011 15:34, Koen Kooi <k...@beagleboard.org> wrote: > >> root@beagleboardxMC:~# yavta -f SGRBG8 -s 320x240 -n 4 --capture=10 --skip > >> 3 -F `media-ctl -e "OMAP3 ISP CCDC output"` > >> Device /dev/video2 opened. > >> Device `OMAP3 ISP CCDC output' on `media' is a video capture device. > >> Video format set: SGRBG8 (47425247) 320x240 buffer size 76800 > >> Video format: SGRBG8 (47425247) 320x240 buffer size 76800 > >> 4 buffers requested. > >> length: 76800 offset: 0 > >> Buffer 0 mapped at address 0x402cf000. > >> length: 76800 offset: 77824 > >> Buffer 1 mapped at address 0x402fe000. > >> length: 76800 offset: 155648 > >> Buffer 2 mapped at address 0x40362000. > >> length: 76800 offset: 233472 > >> Buffer 3 mapped at address 0x40416000. > >> 0 (0) [-] 4294967295 76800 bytes 167.403289 1306829219.931121 0.002 fps > >> 1 (1) [-] 4294967295 76800 bytes 167.633148 1306829220.160980 4.350 fps > >> 2 (2) [-] 4294967295 76800 bytes 167.744506 1306829220.272308 8.980 fps > >> 3 (3) [-] 4294967295 76800 bytes 167.855865 1306829220.383667 8.980 fps > >> 4 (0) [-] 4294967295 76800 bytes 167.967193 1306829220.495025 8.982 fps > >> 5 (1) [-] 4294967295 76800 bytes 168.078552 1306829220.606384 8.980 fps > >> 6 (2) [-] 4294967295 76800 bytes 168.189910 1306829220.717742 8.980 fps > >> 7 (3) [-] 4294967295 76800 bytes 168.301269 1306829220.829071 8.980 fps > >> 8 (0) [-] 4294967295 76800 bytes 168.412597 1306829220.940429 8.982 fps > >> 9 (1) [-] 4294967295 76800 bytes 168.523956 1306829221.051788 8.980 fps > >> Captured 10 frames in 1.254212 seconds (7.973134 fps, 612336.670356 B/s). > >> 4 buffers released. > >> > >> So that seems to be working! I haven't checked the frames yet, but is > >> isn't throwing ISP errors anymore. > > > > Great! > > Do you have a monochrome version of the same sensor? > > I think I only have the colour version, I got it with my leopard355 board way > back. > > So what can I do with an unpatched mediactl and unpatched yavta? Is it > already possible to point something like mplayer or gstreamer to a v4l2 > node and see something? I lost the track of which patch goes where :)
If you're a lucky owner of an LCD on your bb-xM;) you might be able to do something similar, to what's described here http://download.open-technology.de/BeagleBoard_xM-MT9P031/BBxM-MT9P031.txt but both yavta and mplayer on the board, while short-circuiting the network;) I.e., pipe yavta output directly to mplayer. Thanks Guennadi --- Guennadi Liakhovetski, Ph.D. Freelance Open-Source Software Developer http://www.open-technology.de/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
