Thomas Holzeisen wrote:
> Unknown symbol
means, there is unresolved dependencies at your kernel or false
dependencies in the module.
My stick works with those google hosted new driver sources and I have no
use for lirc, so nothing about it at the following lines, they are
stripped, too:
~ # lsusb -v
Bus 001 Device 021: ID 1d19:1101 Dexatek Technology Ltd. DK DVB-T Dongle
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1d19 Dexatek Technology Ltd.
idProduct 0x1101 DK DVB-T Dongle
bcdDevice 1.00
iManufacturer 1 Realtek
iProduct 2 Rtl2832UDVB
iSerial 3 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 4 USB2.0-Bulk&Iso
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 5 Bulk-In, Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 5 Bulk-In, Interface
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 2
Device Status: 0x0000
(Bus Powered)
~ # lsmod | grep dvb
dvb_usb_rtl2832u 190302 0
dvb_usb 17272 1 dvb_usb_rtl2832u
dvb_core 69295 1 dvb_usb
rc_core 15790 2 dvb_usb
~ # dmesg
usb 1-6: new high speed USB device number 20 using ehci_hcd
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-6.3: new high speed USB device number 21 using ehci_hcd
dvb-usb: found a 'DK DVBT DONGLE' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (DK DVBT DONGLE)
DVB: registering adapter 0 frontend 0 (Realtek DVB-T RTL2832)...
dvb-usb: DK DVBT DONGLE successfully initialized and connected.
dvb-usb: found a 'DK DVBT DONGLE' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (DK DVBT DONGLE)
DVB: registering adapter 1 frontend 0 (Realtek DVB-T RTL2832)...
dvb-usb: DK DVBT DONGLE successfully initialized and connected.
Yes, works at no powered four port USB-2.0 mini hub without problems.
~ # uname -a
Linux killerghost 2.6.39-gentoo-r1 #1 SMP Fri Jun 10 12:16:38 CEST 2011
x86_64 Intel(R) Atom(TM) CPU 330 @ 1.60GHz GenuineIntel GNU/Linux
Greetings from Braunschweig, Germany.
Sascha
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
