On Fri, 15 Jul 2011, Ming Lei wrote:
> Hi,
>
> On Thu, Jul 14, 2011 at 11:03 PM, Alan Stern <st...@rowland.harvard.edu>
> wrote:
>
> > More likely, the reset erases some device setting that uvcvideo
> > installed while binding. �Evidently uvcvideo does not re-install the
> > setting during reset-resume; this is probably a bug in the driver.
>
> Alan, you are right.
>
> I think I have found the root cause. Given many devices can't
> handle set_interface(0) if the interfaces were already in altsetting 0,
> usb_reset_and_verify_device does not run set_interface(0). So we
> need to do it in .reset_resume handler of uvc driver and it is always
> safe for uvc devices.
>
> I have tested the below patch, and it can make the uvc device work
> well after rpm resume and system resume(reset resume), both in
> streaming on and off case.
>
> Alan, Laurent, if you have no objections, I will submit a formal one.
>
> diff --git a/drivers/media/video/uvc/uvc_driver.c
> b/drivers/media/video/uvc/uvc_driver.c
> index b6eae48..4055dfc 100644
> --- a/drivers/media/video/uvc/uvc_driver.c
> +++ b/drivers/media/video/uvc/uvc_driver.c
> @@ -1959,8 +1959,12 @@ static int __uvc_resume(struct usb_interface
> *intf, int reset)
> }
>
> list_for_each_entry(stream, &dev->streams, list) {
> - if (stream->intf == intf)
> + if (stream->intf == intf) {
> + if (reset)
> + usb_set_interface(stream->dev->udev,
> + stream->intfnum, 0);
> return uvc_video_resume(stream);
> + }
> }
>
> uvc_trace(UVC_TRACE_SUSPEND, "Resume: video streaming USB interface "
This is fine with me. However, it is strange that the Set-Interface
request is necessary. After being reset, the device should
automatically be in altsetting 0 for all interfaces.
Alan Stern
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
