On Mon, Jul 25, 2011 at 10:13 AM, Koen Kooi <k...@beagleboard.org> wrote: > > Op 25 jul. 2011, om 18:56 heeft Mark Grosen het volgende geschreven: > >> On Wed, Jul 13, 2011 at 11:22 AM, Joel A Fernandes <agnel.j...@gmail.com> >> wrote: >>> * Adds support for mt9v113 sensor by borrowing heavily from PSP 2.6.37 >>> kernel patches >>> * Adapted to changes in v4l2 framework and ISP driver >>> >>> Signed-off-by: Joel A Fernandes <agnel.j...@gmail.com> >>> --- >>> This patch will apply against the 2.6.39 kernel built from the >>> OE-development tree (Which is essentially >>> the v2.6.39 from the main tree with OE patches for BeagleBoard support and >>> a few other features) >>> >>> If you have the Leapord imaging camera board with this particular sensor, I >>> would apprecite it if anyone could >>> try this patch out and provide any feedback/test results. >>> >>> To get the complete tree which works on a BeagleBoard-xM with all the OE >>> patches and this patch, >>> you can clone: >>> https://github.com/joelagnel/linux-omap-2.6/tree/oedev-2.6.39-mt9v113 >>> >>> It will compile and work on a BeagleBoard-xM with the defconfig at: >>> http://cgit.openembedded.org/cgit.cgi/openembedded/tree/recipes/linux/linux-omap-2.6.39/beagleboard/defconfig >>> >>> Also you will need to apply my media-ctl patch (or clone the tree) to setup >>> the formats: >>> https://github.com/joelagnel/media-ctl/commit/cdf24d1249ac1ff3cd6f70ad80c3b76ac28ba0d5 >>> >>> Binaries for quick testing on a BeagleBoard-xM: >>> U-boot: http://utdallas.edu/~joel.fernandes/u-boot.bin >>> U-boot: http://utdallas.edu/~joel.fernandes/MLO >>> uEnv.txt: http://utdallas.edu/~joel.fernandes/uEnv.txt >>> media-ctl: http://utdallas.edu/~joel.fernandes/media-ctl >>> kernel: http://utdallas.edu/~joel.fernandes/uImage >>> >>> media-ctl/yavta commands you could use to get it to show a picture can be >>> found at: >>> http://utdallas.edu/~joel.fernandes/stream.sh >>> >> >> Joel, >> >> I gave this a try this weekend. I ran into a few problems/questions. >> >> I wanted to try with pre-built (tested?) binaries so I grabbed yours >> (used your uImage): >> 1. media-ctl binary does not work because there is no libmediactl.so >> on my Angstrom root FS. >> 2. There was no yavta-nc application. > > have you tried 'opkg update ; opkg install mediactl yavta-nc' ? >
Yes and no. I tried finding the mediactl package but failed because it is actually called media-ctl. Poor searching/naming skills. Thanks for the help. I will try again tonight. Mark -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
