Now that all soc-camera hosts have been ported to use V4L2 subdevice
mediabus-config operations and soc-camera client bus-parameter operations
have been made optional, they can be removed.
Signed-off-by: Guennadi Liakhovetski <g.liakhovet...@gmx.de>
---
drivers/media/video/ov2640.c | 40 ----------------------------------------
1 files changed, 0 insertions(+), 40 deletions(-)
diff --git a/drivers/media/video/ov2640.c b/drivers/media/video/ov2640.c
index 31f361e..2826aff 100644
--- a/drivers/media/video/ov2640.c
+++ b/drivers/media/video/ov2640.c
@@ -701,44 +701,6 @@ static int ov2640_s_stream(struct v4l2_subdev *sd, int
enable)
return 0;
}
-static int ov2640_set_bus_param(struct soc_camera_device *icd,
- unsigned long flags)
-{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
- unsigned long width_flag = flags & SOCAM_DATAWIDTH_MASK;
-
- /* Only one width bit may be set */
- if (!is_power_of_2(width_flag))
- return -EINVAL;
-
- if (icl->set_bus_param)
- return icl->set_bus_param(icl, width_flag);
-
- /*
- * Without board specific bus width settings we support only the
- * sensors native bus width witch are tested working
- */
- if (width_flag & (SOCAM_DATAWIDTH_10 | SOCAM_DATAWIDTH_8))
- return 0;
-
- return 0;
-}
-
-static unsigned long ov2640_query_bus_param(struct soc_camera_device *icd)
-{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
- unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
- SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
- SOCAM_DATA_ACTIVE_HIGH;
-
- if (icl->query_bus_param)
- flags |= icl->query_bus_param(icl) & SOCAM_DATAWIDTH_MASK;
- else
- flags |= SOCAM_DATAWIDTH_10;
-
- return soc_camera_apply_sensor_flags(icl, flags);
-}
-
static int ov2640_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -1067,8 +1029,6 @@ err:
}
static struct soc_camera_ops ov2640_ops = {
- .set_bus_param = ov2640_set_bus_param,
- .query_bus_param = ov2640_query_bus_param,
.controls = ov2640_controls,
.num_controls = ARRAY_SIZE(ov2640_controls),
};
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
