With the new subdevice media-bus configuration methods bus-width is not configured along with other bus parameters, instead, it is derived from the data format. With those methods it is convenient to specify supported bus-widths in the platform data as (1 << (width - 1)). We redefine SOCAM_DATAWIDTH_* flags to use the same convention to make platform data seemlessly reusable.
Signed-off-by: Guennadi Liakhovetski <g.liakhovet...@gmx.de> --- include/media/soc_camera.h | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h index 936a504..73337cf 100644 --- a/include/media/soc_camera.h +++ b/include/media/soc_camera.h @@ -241,19 +241,19 @@ static inline struct v4l2_queryctrl const *soc_camera_find_qctrl( #define SOCAM_MASTER (1 << 0) #define SOCAM_SLAVE (1 << 1) #define SOCAM_HSYNC_ACTIVE_HIGH (1 << 2) -#define SOCAM_HSYNC_ACTIVE_LOW (1 << 3) +#define SOCAM_HSYNC_ACTIVE_LOW (1 << 6) #define SOCAM_VSYNC_ACTIVE_HIGH (1 << 4) #define SOCAM_VSYNC_ACTIVE_LOW (1 << 5) -#define SOCAM_DATAWIDTH_4 (1 << 6) +#define SOCAM_DATAWIDTH_4 (1 << 3) #define SOCAM_DATAWIDTH_8 (1 << 7) #define SOCAM_DATAWIDTH_9 (1 << 8) #define SOCAM_DATAWIDTH_10 (1 << 9) -#define SOCAM_DATAWIDTH_15 (1 << 10) -#define SOCAM_DATAWIDTH_16 (1 << 11) +#define SOCAM_DATAWIDTH_15 (1 << 14) +#define SOCAM_DATAWIDTH_16 (1 << 15) #define SOCAM_PCLK_SAMPLE_RISING (1 << 12) #define SOCAM_PCLK_SAMPLE_FALLING (1 << 13) -#define SOCAM_DATA_ACTIVE_HIGH (1 << 14) -#define SOCAM_DATA_ACTIVE_LOW (1 << 15) +#define SOCAM_DATA_ACTIVE_HIGH (1 << 10) +#define SOCAM_DATA_ACTIVE_LOW (1 << 11) #define SOCAM_MIPI_1LANE (1 << 16) #define SOCAM_MIPI_2LANE (1 << 17) #define SOCAM_MIPI_3LANE (1 << 18) -- 1.7.2.5 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
