Hi all,
I have a card Technisat CableStar HD2
lspci -s 04:00.0 -v
04:00.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI
Bridge Controller [Ver 1.0] (rev 01)
Subsystem: Device ffbf:02e4
Flags: bus master, medium devsel, latency 32, IRQ 21
Memory at 88100000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: Mantis
Kernel modules: mantis
It looks like a supported card but the Subsystem id's are wrong. On the
wiki site the id's are 1ae4:0002.
Using kernel 2.6.39-gentoo-r3, form the gentoo distribution.
But when i replace the id's in the source code from the driver
mantis_common.h
#define TECHNISAT 0x1ae4
into
#define TECHNISAT 0xffbf
and file
mantis_vp2040.h
#define CABLESTAR_HD2 0x0002
into
#define CABLESTAR_HD2 0x02e4
Then the driver loads just fine, and 1 get 4 devices
in /dev/dvb/adapter0/ demux0 dvr0 frontend0 net0
And wen installing tvheadend the card seams to work just fine. I
recorded several shows without any problem.
Is there a way to test if the driver is working good, and why am i
missing the ca0 device?
Thanks,
Rene
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
