Em 04-08-2011 04:14, Thierry Reding escreveu:
> The TM6010 supports much larger I2C transfers than currently specified.
> In fact the Windows driver seems to use 81 bytes per packet by default.
> This commit improves the speed of firmware loading a bit.
> ---
>  drivers/staging/tm6000/tm6000-cards.c |    1 +
>  drivers/staging/tm6000/tm6000-i2c.c   |    2 +-
>  2 files changed, 2 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/staging/tm6000/tm6000-cards.c 
> b/drivers/staging/tm6000/tm6000-cards.c
> index c3b84c9..a5d2a71 100644
> --- a/drivers/staging/tm6000/tm6000-cards.c
> +++ b/drivers/staging/tm6000/tm6000-cards.c
> @@ -929,6 +929,7 @@ static void tm6000_config_tuner(struct tm6000_core *dev)
>               memset(&ctl, 0, sizeof(ctl));
>  
>               ctl.demod = XC3028_FE_ZARLINK456;
> +             ctl.max_len = 81;
>  
>               xc2028_cfg.tuner = TUNER_XC2028;
>               xc2028_cfg.priv  = &ctl;
> diff --git a/drivers/staging/tm6000/tm6000-i2c.c 
> b/drivers/staging/tm6000/tm6000-i2c.c
> index 21cd9f8..2cb7573 100644
> --- a/drivers/staging/tm6000/tm6000-i2c.c
> +++ b/drivers/staging/tm6000/tm6000-i2c.c
> @@ -50,7 +50,7 @@ static int tm6000_i2c_send_regs(struct tm6000_core *dev, 
> unsigned char addr,
>       unsigned int i2c_packet_limit = 16;
>  
>       if (dev->dev_type == TM6010)
> -             i2c_packet_limit = 64;
> +             i2c_packet_limit = 256;

This shouldn't work fine. As said at USB 2.0 specification:

        An endpoint for control transfers specifies the maximum data payload 
size that the endpoint can accept from
        or transmit to the bus. The allowable maximum control transfer data 
payload sizes for full-speed devices is
        8, 16, 32, or 64 bytes; for high-speed devices, it is 64 bytes and for 
low-speed devices, it is 8 bytes. This
        maximum applies to the data payloads of the Data packets following a 
Setup; i.e., the size specified is for
        the data field of the packet as defined in Chapter 8, not including 
other information that is required by the
        protocol. A Setup packet is always eight bytes. A control pipe 
(including the Default Control Pipe) always
        uses its wMaxPacketSize value for data payloads.
        (Item 5.5.3 Control Transfer Packet Size Constraints).

Using a value higher than 64 may cause troubles with some USB devices
(hubs, USB adapters, etc).

Cheers,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to