Hi Sakari,
On Wednesday 31 August 2011 21:47:11 Sakari Ailus wrote:
> On Wed, Aug 31, 2011 at 06:31:59PM +0200, Laurent Pinchart wrote:
> > Those features are half-implemented and not used. Remove them.
> >
> > Signed-off-by: Laurent Pinchart <[email protected]>
> > ---
> >
> > drivers/media/video/omap3isp/ispccdc.c | 42
> > +++---------------------------- drivers/media/video/omap3isp/ispccdc.h
> > | 18 -------------
> > 2 files changed, 4 insertions(+), 56 deletions(-)
> >
> > diff --git a/drivers/media/video/omap3isp/ispccdc.c
> > b/drivers/media/video/omap3isp/ispccdc.c index 40b141c..176efae 100644
> > --- a/drivers/media/video/omap3isp/ispccdc.c
> > +++ b/drivers/media/video/omap3isp/ispccdc.c
> > @@ -965,13 +965,11 @@ static void ccdc_config_sync_if(struct
> > isp_ccdc_device *ccdc,
> >
> > u32 syn_mode = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC,
> >
> > ISPCCDC_SYN_MODE);
> >
> > + syn_mode &= ~(ISPCCDC_SYN_MODE_FLDSTAT | ISPCCDC_SYN_MODE_EXWEN |
> > + ISPCCDC_SYN_MODE_FLDMODE | ISPCCDC_SYN_MODE_FLDPOL |
> > + ISPCCDC_SYN_MODE_FLDOUT | ISPCCDC_SYN_MODE_VDHDOUT);
>
> This might be a silly question but is there a need to read some bits from
> the the register? It seems to me that awfully many of the will always get
> overwritten.
I've been thinking about that as well. The only bits we won't overwrite are
the reserved bits. I guess we can just write them to 0.
> > syn_mode |= ISPCCDC_SYN_MODE_VDHDEN;
> >
> > - if (syncif->fldstat)
> > - syn_mode |= ISPCCDC_SYN_MODE_FLDSTAT;
> > - else
> > - syn_mode &= ~ISPCCDC_SYN_MODE_FLDSTAT;
> > -
> >
> > syn_mode &= ~ISPCCDC_SYN_MODE_DATSIZ_MASK;
> > switch (syncif->datsz) {
> >
> > case 8:
> > @@ -988,21 +986,11 @@ static void ccdc_config_sync_if(struct
> > isp_ccdc_device *ccdc,
> >
> > break;
> >
> > };
> >
> > - if (syncif->fldmode)
> > - syn_mode |= ISPCCDC_SYN_MODE_FLDMODE;
> > - else
> > - syn_mode &= ~ISPCCDC_SYN_MODE_FLDMODE;
> > -
> >
> > if (syncif->datapol)
> >
> > syn_mode |= ISPCCDC_SYN_MODE_DATAPOL;
> >
> > else
> >
> > syn_mode &= ~ISPCCDC_SYN_MODE_DATAPOL;
> >
> > - if (syncif->fldpol)
> > - syn_mode |= ISPCCDC_SYN_MODE_FLDPOL;
> > - else
> > - syn_mode &= ~ISPCCDC_SYN_MODE_FLDPOL;
> > -
> >
> > if (syncif->hdpol)
> >
> > syn_mode |= ISPCCDC_SYN_MODE_HDPOL;
> >
> > else
> >
> > @@ -1013,23 +1001,6 @@ static void ccdc_config_sync_if(struct
> > isp_ccdc_device *ccdc,
> >
> > else
> >
> > syn_mode &= ~ISPCCDC_SYN_MODE_VDPOL;
> >
> > - if (syncif->ccdc_mastermode) {
> > - syn_mode |= ISPCCDC_SYN_MODE_FLDOUT | ISPCCDC_SYN_MODE_VDHDOUT;
> > - isp_reg_writel(isp,
> > - syncif->hs_width << ISPCCDC_HD_VD_WID_HDW_SHIFT
> > - | syncif->vs_width << ISPCCDC_HD_VD_WID_VDW_SHIFT,
> > - OMAP3_ISP_IOMEM_CCDC,
> > - ISPCCDC_HD_VD_WID);
> > -
> > - isp_reg_writel(isp,
> > - syncif->ppln << ISPCCDC_PIX_LINES_PPLN_SHIFT
> > - | syncif->hlprf << ISPCCDC_PIX_LINES_HLPRF_SHIFT,
> > - OMAP3_ISP_IOMEM_CCDC,
> > - ISPCCDC_PIX_LINES);
> > - } else
> > - syn_mode &= ~(ISPCCDC_SYN_MODE_FLDOUT |
> > - ISPCCDC_SYN_MODE_VDHDOUT);
> > -
> >
> > isp_reg_writel(isp, syn_mode, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE);
> >
> > if (!syncif->bt_r656_en)
> >
> > @@ -1148,6 +1119,7 @@ static void ccdc_configure(struct isp_ccdc_device
> > *ccdc)
> >
> > omap3isp_configure_bridge(isp, ccdc->input, pdata, shift);
> >
> > ccdc->syncif.datsz = depth_out;
> >
> > + ccdc->syncif.datapol = 0;
> >
> > ccdc->syncif.hdpol = pdata ? pdata->hs_pol : 0;
> > ccdc->syncif.vdpol = pdata ? pdata->vs_pol : 0;
> > ccdc_config_sync_if(ccdc, &ccdc->syncif);
> >
> > @@ -2258,13 +2230,7 @@ int omap3isp_ccdc_init(struct isp_device *isp)
> >
> > INIT_LIST_HEAD(&ccdc->lsc.free_queue);
> > spin_lock_init(&ccdc->lsc.req_lock);
> >
> > - ccdc->syncif.ccdc_mastermode = 0;
> > - ccdc->syncif.datapol = 0;
> >
> > ccdc->syncif.datsz = 0;
> >
> > - ccdc->syncif.fldmode = 0;
> > - ccdc->syncif.fldout = 0;
> > - ccdc->syncif.fldpol = 0;
> > - ccdc->syncif.fldstat = 0;
> >
> > ccdc->clamp.oblen = 0;
> > ccdc->clamp.dcsubval = 0;
> >
> > diff --git a/drivers/media/video/omap3isp/ispccdc.h
> > b/drivers/media/video/omap3isp/ispccdc.h index 483a19c..0e98f10 100644
> > --- a/drivers/media/video/omap3isp/ispccdc.h
> > +++ b/drivers/media/video/omap3isp/ispccdc.h
> > @@ -48,35 +48,17 @@ enum ccdc_input_entity {
> >
> > /*
> >
> > * struct ispccdc_syncif - Structure for Sync Interface between sensor
> > and CCDC
> >
> > - * @ccdc_mastermode: Master mode. 1 - Master, 0 - Slave.
> > - * @fldstat: Field state. 0 - Odd Field, 1 - Even Field.
> >
> > * @datsz: Data size.
> >
> > - * @fldmode: 0 - Progressive, 1 - Interlaced.
> >
> > * @datapol: 0 - Positive, 1 - Negative.
> >
> > - * @fldpol: 0 - Positive, 1 - Negative.
> >
> > * @hdpol: 0 - Positive, 1 - Negative.
> > * @vdpol: 0 - Positive, 1 - Negative.
> >
> > - * @fldout: 0 - Input, 1 - Output.
> > - * @hs_width: Width of the Horizontal Sync pulse, used for HS/VS Output.
> > - * @vs_width: Width of the Vertical Sync pulse, used for HS/VS Output.
> > - * @ppln: Number of pixels per line, used for HS/VS Output.
> > - * @hlprf: Number of half lines per frame, used for HS/VS Output.
> >
> > * @bt_r656_en: 1 - Enable ITU-R BT656 mode, 0 - Sync mode.
> > */
> >
> > struct ispccdc_syncif {
> >
> > - u8 ccdc_mastermode;
> > - u8 fldstat;
> >
> > u8 datsz;
> >
> > - u8 fldmode;
> >
> > u8 datapol;
> >
> > - u8 fldpol;
> >
> > u8 hdpol;
> > u8 vdpol;
> >
> > - u8 fldout;
> > - u8 hs_width;
> > - u8 vs_width;
> > - u8 ppln;
> > - u8 hlprf;
> >
> > u8 bt_r656_en;
> >
> > };
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
