On Tue, Sep 20, 2011 at 01:58:59PM +0200, Sylwester Nawrocki wrote:
> This driver exposes preview mode operation of the S5K6AAFX sensor with
> embedded SoC ISP. It uses one of the five user predefined configuration
> register sets. There is yet no support for capture (snapshot) operation.
> Following controls are supported:
> manual/auto exposure and gain, power line frequency (anti-flicker),
> saturation, sharpness, brightness, contrast, white balance temperature,
> color effects. horizontal/vertical image flip, frame interval.
Thanks for the patch, Sylwester!
[clip]
> + v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_POWER_LINE_FREQUENCY,
> + V4L2_CID_POWER_LINE_FREQUENCY_AUTO, 0,
> + V4L2_CID_POWER_LINE_FREQUENCY_50HZ);
> +
> + v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_COLORFX,
> + V4L2_COLORFX_SKETCH, 0x3D0, V4L2_COLORFX_NONE);
New items may be added to standard menus so you should mask out also
undefined bits. Say, ~0x42f (hope I got that right).
Youd also don't need to check for invalid menu ids; the control framework
does this for you.
> + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_WHITE_BALANCE_TEMPERATURE,
> + 0, 256, 1, 0);
> +
> + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION, -127, 127, 1, 0);
> + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS, -127, 127, 1, 0);
> + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -127, 127, 1, 0);
> + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -127, 127, 1, 0);
> +
> + s5k6aa->sd.ctrl_handler = hdl;
Shoudln't this assignment be done after checking for the error?
> + if (hdl->error) {
> + ret = hdl->error;
> + v4l2_ctrl_handler_free(hdl);
> + }
> + return ret;
Cheers,
--
Sakari Ailus
e-mail: [email protected] jabber/XMPP/Gmail: [email protected]
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
