Hi Gary,
On Wednesday 09 November 2011 12:01:34 Gary Thomas wrote:
> On 2011-11-08 17:54, Laurent Pinchart wrote:
> > On Tuesday 08 November 2011 14:38:55 Gary Thomas wrote:
> >> On 2011-11-08 06:06, Laurent Pinchart wrote:
> >>> On Tuesday 08 November 2011 13:52:25 Gary Thomas wrote:
> >>>> On 2011-11-08 05:30, Javier Martinez Canillas wrote:
> >>>>> On Tue, Nov 8, 2011 at 1:20 PM, Gary Thomas wrote:
> >>>>>> On 2011-11-04 04:37, Laurent Pinchart wrote:
> >>>>>>> On Tuesday 01 November 2011 19:52:49 Gary Thomas wrote:
> >>>>>>>> I'm trying to use the MT9P031 digital sensor with the Media
> >>>>>>>> Controller Framework. media-ctl tells me that the sensor is set
> >>>>>>>> to capture using SGRBG12 2592x1944
> >>>>>>>>
> >>>>>>>> Questions:
> >>>>>>>> * What pixel format in ffmpeg does this correspond to?
> >>>>>>>
> >>>>>>> I don't know if ffmpeg supports Bayer formats. The corresponding
> >>>>>>> fourcc in V4L2 is BA12.
> >>>>>>
> >>>>>> ffmpeg doesn't seem to support these formats
> >>>>>>
> >>>>>>> If your sensor is hooked up to the OMAP3 ISP, you can then
> >>>>>>> configure the pipeline to include the preview engine and the
> >>>>>>> resizer, and capture YUV data
> >>>>>>> at the resizer output.
> >>>>>>
> >>>>>> I am using the OMAP3 ISP, but it's a bit unclear to me how to set up
> >>>>>> the pipeline
> >>>>>
> >>>>> Hi Gary,
> >>>>>
> >>>>> I'm also using another sensor mtv9034 with OMAP3 ISP, so maybe I can
> >>>>> help you.
> >>>>>
> >>>>>> using media-ctl (I looked for documentation on this tool, but came
> >>>>>> up dry - is there any?)
> >>>>>>
> >>>>>> Do you have an example of how to configure this using the OMAP3 ISP?
> >>>>>
> >>>>> This is how I configure the pipeline to connect the CCDC with the
> >>>>> Previewer and Resizer:
> >>>>>
> >>>>> ./media-ctl -l '"mt9v032 3-005c":0->"OMAP3 ISP CCDC":0[1]'
> >>>>> ./media-ctl -l '"OMAP3 ISP CCDC":2->"OMAP3 ISP preview":0[1]'
> >>>>> ./media-ctl -l '"OMAP3 ISP preview":1->"OMAP3 ISP resizer":0[1]'
> >>>>> ./media-ctl -l '"OMAP3 ISP resizer":1->"OMAP3 ISP resizer
> >>>>> output":0[1]' ./media-ctl -f '"mt9v032 3-005c":0[SGRBG10 752x480]'
> >>>>> ./media-ctl -f '"OMAP3 ISP CCDC":0 [SGRBG10 752x480]'
> >>>>> ./media-ctl -f '"OMAP3 ISP CCDC":1 [SGRBG10 752x480]'
> >>>>> ./media-ctl -f '"OMAP3 ISP preview":0 [SGRBG10 752x479]'
> >>>>> ./media-ctl -f '"OMAP3 ISP resizer":0 [YUYV 734x471]'
> >>>>> ./media-ctl -f '"OMAP3 ISP resizer":1 [YUYV 640x480]'
> >>>>>
> >>>>> Hope it helps,
> >>>>
> >>>> Thanks, I'll give this a try.
> >>>>
> >>>> I assume that your sensor is probably larger than 752x480 (the mt9p031
> >>>> is 2592x1944 raw) and that setting the smaller frame size enables some
> >>>> scaling and/or cropping in the driver?
> >>>
> >>> The mt9v034 is a wide VGA 752x480 sensor if I'm not mistaken. You
> >>> should modify the resolutions in the above commands according to your
> >>> sensor. Note that the CCDC crops online line when outputting data to
> >>> the preview engine, and that the preview engine crops 18 columsn and 8
> >>> lines. You can then scale the image by modifying the resizer output
> >>> size.
> >>
> >> Thanks. After much trial and error (and some kernel printks to
> >>
> >> understand what parameters were failing), I came up with this sequence:
> >> media-ctl -r
> >> media-ctl -l '"mt9p031 3-005d":0->"OMAP3 ISP CCDC":0[1]'
> >> media-ctl -l '"OMAP3 ISP CCDC":2->"OMAP3 ISP preview":0[1]'
> >> media-ctl -l '"OMAP3 ISP preview":1->"OMAP3 ISP resizer":0[1]'
> >> media-ctl -l '"OMAP3 ISP resizer":1->"OMAP3 ISP resizer
> >> output":0[1]' media-ctl -f '"mt9p031 3-005d":0[SGRBG12 2592x1944]'
> >> media-ctl -f '"OMAP3 ISP CCDC":0 [SGRBG12 2592x1944]'
> >> media-ctl -f '"OMAP3 ISP CCDC":1 [SGRBG12 2592x1944]'
> >> media-ctl -f '"OMAP3 ISP preview":0 [SGRBG12 2592x1943]'
> >> media-ctl -f '"OMAP3 ISP resizer":0 [YUYV 2574x1935]'
> >> media-ctl -f '"OMAP3 ISP resizer":1 [YUYV 642x483]'
> >>
> >> When I tried to grab though, I got this:
> >>
> >> # yavta --capture=4 -f YUYV -s 642x483 -F /dev/video6
> >> Device /dev/video6 opened.
> >> Device `OMAP3 ISP resizer output' on `media' is a video capture device.
> >> Video format set: YUYV (56595559) 642x483 buffer size 633696
> >> Video format: YUYV (56595559) 642x483 buffer size 633696
> >> 8 buffers requested.
> >> length: 633696 offset: 0
> >> Buffer 0 mapped at address 0x4028c000.
> >> length: 633696 offset: 634880
> >> Buffer 1 mapped at address 0x403d0000.
> >> length: 633696 offset: 1269760
> >> Buffer 2 mapped at address 0x404b3000.
> >> length: 633696 offset: 1904640
> >> Buffer 3 mapped at address 0x4062b000.
> >> length: 633696 offset: 2539520
> >> Buffer 4 mapped at address 0x406d6000.
> >> length: 633696 offset: 3174400
> >> Buffer 5 mapped at address 0x40821000.
> >> length: 633696 offset: 3809280
> >> Buffer 6 mapped at address 0x4097c000.
> >> length: 633696 offset: 4444160
> >> Buffer 7 mapped at address 0x40adf000.
> >>
> >> Unable to handle kernel NULL pointer dereference at virtual address
> >> 00000018
> >
> > Ouch :-(
> >
> > Could you please verify that arch/arm/mach-omap2/board-overo.c includes
> > the following code, and that CONFIG_OMAP_MUX is enabled ?
>
> I'm not using an Overo board - rather one of our own internal designs.
My bad, sorry.
> I have verified that the pull up/down on those pins is disabled.
>
> The failure is coming from this code in ispccdc.c
> static void ccdc_hs_vs_isr(struct isp_ccdc_device *ccdc)
> {
> struct isp_pipeline *pipe =
> to_isp_pipeline(&ccdc->video_out.video.entity);
> The value of pipe is NULL which leads to the failure.
>
> Questions:
> * I assume that getting HS/VS interrupts is correct in this mode?
> * Why is the statement not written (as all others are)
> struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity);
> I tried this change and the kernel doesn't crash.
>
> I've found that I can get raw frames out of CCDC, but I don't get anything
> at all when the output continues through the preview and/or resize nodes.
>
> Ideas?
I'm really puzzled, this should have been caught much earlier :-)
Your analysis makes sense. Would you like to submit a patch yourself ? If not
I can do it.
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
