Remove get config from probe and move to identify_state.
intf->cur_altsetting->desc.bInterfaceNumber is always expected to be zero, so
there
no point in checking for it.
Calling from probe seems to cause a race condition with some USB controllers.
The first call fails as the device appears to busy with USB sub system
control calls.
Signed-off-by: Malcolm Priestley <tvbox...@gmail.com>
---
drivers/media/dvb/dvb-usb/af9015.c | 87 ++++++++++++++---------------------
1 files changed, 35 insertions(+), 52 deletions(-)
diff --git a/drivers/media/dvb/dvb-usb/af9015.c
b/drivers/media/dvb/dvb-usb/af9015.c
index dc6e4ec..eb464c8 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -820,7 +820,8 @@ static void af9015_set_remote_config(struct usb_device
*udev,
return;
}
-static int af9015_read_config(struct usb_device *udev)
+static int af9015_read_config(struct usb_device *udev,
+ struct dvb_usb_device_properties *props)
{
int ret;
u8 val, i, offset = 0;
@@ -842,12 +843,10 @@ static int af9015_read_config(struct usb_device *udev)
goto error;
deb_info("%s: IR mode:%d\n", __func__, val);
- for (i = 0; i < af9015_properties_count; i++) {
- if (val == AF9015_IR_MODE_DISABLED)
- af9015_properties[i].rc.core.rc_codes = NULL;
- else
- af9015_set_remote_config(udev, &af9015_properties[i]);
- }
+ if (val == AF9015_IR_MODE_DISABLED)
+ props->rc.core.rc_codes = NULL;
+ else
+ af9015_set_remote_config(udev, props);
/* TS mode - one or two receivers */
req.addr = AF9015_EEPROM_TS_MODE;
@@ -859,18 +858,16 @@ static int af9015_read_config(struct usb_device *udev)
/* Set adapter0 buffer size according to USB port speed, adapter1 buffer
size can be static because it is enabled only USB2.0 */
- for (i = 0; i < af9015_properties_count; i++) {
- /* USB1.1 set smaller buffersize and disable 2nd adapter */
- if (udev->speed == USB_SPEED_FULL) {
-
af9015_properties[i].adapter[0].fe[0].stream.u.bulk.buffersize
- = TS_USB11_FRAME_SIZE;
- /* disable 2nd adapter because we don't have
+ /* USB1.1 set smaller buffersize and disable 2nd adapter */
+ if (udev->speed == USB_SPEED_FULL) {
+ props->adapter[0].fe[0].stream.u.bulk.buffersize
+ = TS_USB11_FRAME_SIZE;
+ /* disable 2nd adapter because we don't have
PID-filters */
- af9015_config.dual_mode = 0;
- } else {
-
af9015_properties[i].adapter[0].fe[0].stream.u.bulk.buffersize
- = TS_USB20_FRAME_SIZE;
- }
+ af9015_config.dual_mode = 0;
+ } else {
+ props->adapter[0].fe[0].stream.u.bulk.buffersize
+ = TS_USB20_FRAME_SIZE;
}
if (af9015_config.dual_mode) {
@@ -882,16 +879,11 @@ static int af9015_read_config(struct usb_device *udev)
af9015_af9013_config[1].demod_address = val;
/* enable 2nd adapter */
- for (i = 0; i < af9015_properties_count; i++)
- af9015_properties[i].num_adapters = 2;
+ props->num_adapters = 2;
+ } else /* disable 2nd adapter */
+ props->num_adapters = 1;
- } else {
- /* disable 2nd adapter */
- for (i = 0; i < af9015_properties_count; i++)
- af9015_properties[i].num_adapters = 1;
- }
-
- for (i = 0; i < af9015_properties[0].num_adapters; i++) {
+ for (i = 0; i < props->num_adapters; i++) {
if (i == 1)
offset = AF9015_EEPROM_OFFSET;
/* xtal */
@@ -995,8 +987,7 @@ error:
/* disable dual mode */
af9015_config.dual_mode = 0;
/* disable 2nd adapter */
- for (i = 0; i < af9015_properties_count; i++)
- af9015_properties[i].num_adapters = 1;
+ props->num_adapters = 1;
/* set correct IF */
af9015_af9013_config[0].tuner_if = 4570;
@@ -1014,6 +1005,10 @@ static int af9015_identify_state(struct usb_device *udev,
u8 reply;
struct req_t req = {GET_CONFIG, 0, 0, 0, 0, 1, &reply};
+ ret = af9015_read_config(udev, props);
+ if (ret)
+ return ret;
+
ret = af9015_rw_udev(udev, &req);
if (ret)
return ret;
@@ -1675,33 +1670,21 @@ static int af9015_usb_probe(struct usb_interface *intf,
{
int ret = 0;
struct dvb_usb_device *d = NULL;
- struct usb_device *udev = interface_to_usbdev(intf);
u8 i;
- deb_info("%s: interface:%d\n", __func__,
- intf->cur_altsetting->desc.bInterfaceNumber);
-
- /* interface 0 is used by DVB-T receiver and
- interface 1 is for remote controller (HID) */
- if (intf->cur_altsetting->desc.bInterfaceNumber == 0) {
- ret = af9015_read_config(udev);
- if (ret)
- return ret;
-
- for (i = 0; i < af9015_properties_count; i++) {
- ret = dvb_usb_device_init(intf, &af9015_properties[i],
- THIS_MODULE, &d, adapter_nr);
- if (!ret)
- break;
- if (ret != -ENODEV)
- return ret;
- }
- if (ret)
+ for (i = 0; i < af9015_properties_count; i++) {
+ ret = dvb_usb_device_init(intf, &af9015_properties[i],
+ THIS_MODULE, &d, adapter_nr);
+ if (!ret)
+ break;
+ if (ret != -ENODEV)
return ret;
-
- if (d)
- ret = af9015_init(d);
}
+ if (ret)
+ return ret;
+
+ if (d)
+ ret = af9015_init(d);
return ret;
}
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
