Hi,
I have just acquired a Hauppauge HVR 4000 hybrid DVB-S2 / DVB-T / Analogue card
which I am trying to use with VDR 1.7.21 on the latest Slackware stable release
using kernel 2.6.37.6.
The drivers seem to detect the card OK as seen in dmesg output:
[ 7.501729] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded
[ 7.503174] cx88[0]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000
DVB-S/S2/T/Hybrid [card=68,autodetected], frontend(s): 2
[ 7.503373] cx88[0]: TV tuner type 63, Radio tuner type -1
[ 7.551718] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.551788] i915 0000:00:02.0: setting latency timer to 64
[ 7.564218] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[ 7.564399] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.564825] [drm] initialized overlay support
[ 7.579830] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded
[ 7.583007] No connectors reported connected with modes
[ 7.583077] [drm] Cannot find any crtc or sizes - going 1024x768
[ 7.588874] Console: switching to colour frame buffer device 128x48
[ 7.591121] fb0: inteldrmfb frame buffer device
[ 7.591144] drm: registered panic notifier
[ 7.591174] No ACPI video bus found
[ 7.591316] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.617097] cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000
tuner
[ 7.702578] IR RC5(x) protocol handler initialized
[ 7.728589] IR RC6 protocol handler initialized
[ 7.730628] cx2388x alsa driver version 0.0.9 loaded
[ 7.746096] IR JVC protocol handler initialized
[ 7.749962] IR Sony protocol handler initialized
[ 7.918601] IR MCE Keyboard/mouse protocol handler initialized
[ 7.980484] lirc_dev: IR Remote Control driver registered, major 243
[ 7.994039] IR LIRC bridge handler initialized
[ 7.994767] tda9887 15-0043: creating new instance
[ 7.994795] tda9887 15-0043: tda988[5/6/7] found
[ 7.995608] tuner 15-0043: Tuner 74 found with type(s) Radio TV.
[ 7.997560] tuner 15-0061: Tuner -1 found with type(s) Radio TV.
[ 8.035897] tveeprom 15-0050: Hauppauge model 69009, rev B2D3, serial#
3313260
[ 8.035934] tveeprom 15-0050: MAC address is 00:0d:fe:32:8e:6c
[ 8.035965] tveeprom 15-0050: tuner model is Philips FMD1216MEX (idx 133,
type 78)
[ 8.036005] tveeprom 15-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L')
PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 8.036055] tveeprom 15-0050: audio processor is CX882 (idx 33)
[ 8.036085] tveeprom 15-0050: decoder processor is CX882 (idx 25)
[ 8.037240] tveeprom 15-0050: has radio, has IR receiver, has no IR
transmitter
[ 8.038391] cx88[0]: hauppauge eeprom: model=69009
[ 8.042759] tuner-simple 15-0061: creating new instance
[ 8.043910] tuner-simple 15-0061: type set to 78 (Philips FMD1216MEX MK3
Hybrid Tuner)
[ 8.087006] Registered IR keymap rc-hauppauge
[ 8.088273] input: cx88 IR (Hauppauge WinTV-HVR400 as
/devices/pci0000:00/0000:00:1e.0/0000:03:00.2/rc/rc0/input6
[ 8.089502] rc0: cx88 IR (Hauppauge WinTV-HVR400 as
/devices/pci0000:00/0000:00:1e.0/0000:03:00.2/rc/rc0
[ 8.090743] input: MCE IR Keyboard/Mouse (cx88xx) as
/devices/virtual/input/input7
[ 8.092315] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at
minor = 0
[ 8.093521] cx88[0]/2: cx2388x 8802 Driver Manager
[ 8.094694] cx88-mpeg driver manager 0000:03:00.2: PCI INT A -> GSI 19
(level, low) -> IRQ 19
[ 8.095882] cx88[0]/2: found at 0000:03:00.2, rev: 5, irq: 19, latency: 64,
mmio: 0xfc000000
[ 8.097825] cx8800 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 8.099081] cx88[0]/0: found at 0000:03:00.0, rev: 5, irq: 19, latency: 64,
mmio: 0xfa000000
[ 8.112941] WARNING: You are using an experimental version of the media
stack.
[ 8.112943] As the driver is backported to an older kernel, it doesn't offer
[ 8.112944] enough quality for its usage in production.
[ 8.112945] Use it with care.
[ 8.112945] Latest git patches (needed if you report a bug to
linux-media@vger.kernel.org):
[ 8.112946] e9eb0dadba932940f721f9d27544a7818b2fa1c5 [media] V4L menu: add
submenu for platform devices
[ 8.112947] 1df3a2c6d036f4923c229fa98725deda320680e1 [media] cx88: fix menu
level for the VP-3054 module
[ 8.112948] 486eeb5628f812b4836405e2b2e76594287dd873 [media] V4L menu: move
all PCI(e) devices to their own submenu
[ 8.197600] wm8775 15-001b: chip found @ 0x36 (cx88[0])
[ 8.211895] cx88/2: cx2388x dvb driver version 0.0.9 loaded
[ 8.213155] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 8.213801] cx88[0]/0: registered device video0 [v4l2]
[ 8.213847] cx88[0]/0: registered device vbi0
[ 8.213891] cx88[0]/0: registered device radio0
[ 8.215082] cx88_audio 0000:03:00.1: PCI INT A -> GSI 19 (level, low) -> IRQ
19
[ 8.215106] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 8.220763] cx88[0]/2: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000
DVB-S/S2/T/Hybrid [card=68]
[ 8.222053] cx88[0]/2: cx2388x based DVB/ATSC card
[ 8.223339] cx8802_alloc_frontends() allocating 2 frontend(s)
[ 8.272844] tuner-simple 15-0061: attaching existing instance
[ 8.274126] tuner-simple 15-0061: couldn't set type to 63. Using 78 (Philips
FMD1216MEX MK3 Hybrid Tuner) instead
[ 8.279264] DVB: registering new adapter (cx88[0])
[ 8.280558] DVB: registering adapter 0 frontend 0 (Conexant
CX24116/CX24118)...
[ 8.282871] DVB: registering adapter 0 frontend 1 (Conexant CX22702 DVB-T)...
[ 8.423842] Adding 1954444k swap on /dev/sda2. Priority:-1 extents:1
across:1954444k
[ 8.503564] fuse init (API version 7.15)
[ 9.184585] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 9.308820] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 9.581725] lp0: using parport0 (interrupt-driven).
[ 9.583036] lp0: console ready
[ 14.900540] ATL1E 0000:01:00.0: irq 42 for MSI/MSI-X
[ 20.345506] ATL1E 0000:01:00.0: eth0: NIC Link is Up <10 Mbps Full Duplex>
[ 29.618702] NET: Registered protocol family 10
[ 29.618871] lo: Disabled Privacy Extensions
[ 40.210009] eth0: no IPv6 routers present
[ 308.497672] start_kdeinit (2104): /proc/2104/oom_adj is deprecated, please
use /proc/2104/oom_score_adj instead.
[ 313.497259] ata3.00: configured for UDMA/133
[ 313.497262] ata3: EH complete
[ 314.195827] EXT4-fs (sda1): re-mounted. Opts: commit=0
However, VDR is only able to use the first of the two frontends, reporting that
the second frontend (DVB/T) is busy:
Nov 13 20:04:06 Nutrigrain vdr: [2426] VDR version 1.7.21 started
Nov 13 20:04:06 Nutrigrain vdr: [2426] codeset is 'ISO-8859-1' - known
Nov 13 20:04:06 Nutrigrain vdr: [2426] found 28 locales in ./locale
Nov 13 20:04:06 Nutrigrain vdr: [2426] loading plugin:
./PLUGINS/lib/libvdr-sc.so.1.7.21
Nov 13 20:04:06 Nutrigrain vdr: [2426] cTimeMs: using monotonic clock
(resolution is 1 ns)
Nov 13 20:04:06 Nutrigrain vdr: [2426] loading plugin:
./PLUGINS/lib/libvdr-rotor.so.1.7.21
Nov 13 20:04:06 Nutrigrain vdr: [2426] loading /home/digitalTV/config/setup.conf
Nov 13 20:04:07 Nutrigrain vdr: [2426] unknown locale: '0'
Nov 13 20:04:07 Nutrigrain vdr: [2426] loading
/home/digitalTV/config/sources.conf
Nov 13 20:04:07 Nutrigrain vdr: [2426] loading
/home/digitalTV/config/diseqc.conf
Nov 13 20:04:07 Nutrigrain vdr: [2426] loading
/home/digitalTV/config/channels.conf
Nov 13 20:04:07 Nutrigrain vdr: [2426] loading
/home/digitalTV/config/timers.conf
Nov 13 20:04:07 Nutrigrain vdr: [2426] loading
/home/digitalTV/config/commands.conf
Nov 13 20:04:07 Nutrigrain vdr: [2426] loading
/home/digitalTV/config/svdrphosts.conf
Nov 13 20:04:07 Nutrigrain vdr: [2426] loading
/home/digitalTV/config/remote.conf
Nov 13 20:04:07 Nutrigrain vdr: [2426] loading
/home/digitalTV/config/keymacros.conf
Nov 13 20:04:07 Nutrigrain vdr: [2427] video directory scanner thread started
(pid=2426, tid=2427)
Nov 13 20:04:07 Nutrigrain vdr: [2428] video directory scanner thread started
(pid=2426, tid=2428)
Nov 13 20:04:07 Nutrigrain vdr: [2426] reading EPG data from
/home/digitalTV/video/epg.data
Nov 13 20:04:07 Nutrigrain vdr: [2427] video directory scanner thread ended
(pid=2426, tid=2427)
Nov 13 20:04:07 Nutrigrain vdr: [2428] video directory scanner thread ended
(pid=2426, tid=2428)
Nov 13 20:04:07 Nutrigrain vdr: [2426] registered source parameters for 'A -
ATSC'
Nov 13 20:04:07 Nutrigrain vdr: [2426] registered source parameters for 'C -
DVB-C'
Nov 13 20:04:07 Nutrigrain vdr: [2426] registered source parameters for 'S -
DVB-S'
Nov 13 20:04:07 Nutrigrain vdr: [2426] registered source parameters for 'T -
DVB-T'
Nov 13 20:04:07 Nutrigrain vdr: [2426] probing /dev/dvb/adapter0/frontend0
Nov 13 20:04:07 Nutrigrain vdr: [2426] new device number 1
Nov 13 20:04:12 Nutrigrain vdr: [2426] frontend 0/0 provides DVB-S2 with QPSK
("Conexant CX24116/CX24118")
Nov 13 20:04:12 Nutrigrain vdr: [2431] tuner on frontend 0/0 thread started
(pid=2426, tid=2431)
Nov 13 20:04:12 Nutrigrain vdr: [2432] section handler thread started
(pid=2426, tid=2432)
Nov 13 20:04:17 Nutrigrain vdr: [2426] ERROR: /dev/dvb/adapter0/frontend1:
Device or resource busy
Nov 13 20:04:17 Nutrigrain vdr: [2426] found 1 DVB device
I initially tried using the stock drivers that came with 2.6.37.6 which is
where I first experienced the problem. I then tried the latest s2-liplianin-
f5cd7d75370e drivers and finally (in the example above) the latest v4l-dvb
drivers, all of which exhibit the same problem. I have also tried to use the
mfe drivers from November 2008 but could not get them to compile.
Any assistance in resolving this issue would be much appreciated.
Thanks,
Mark Hawes.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
