On 06-12-2011 12:33, Gianluca Gennari wrote:
Hi All,
I have a Terratec Cinergy Hybrid T USB XS stick (USB 0ccd:0042).
This device is made of the following components:
- Empiatech em2880 USB bridge;
- Zarlink zl10353 demodulator;
- Xceive XC3028 tuner;
For this device, the ZARLINK456 define is set to true so it is using the
firmwares with type D2633 for the XC3028 tuner.
I found out that:
1) the DTV7 firmware works fine in VHF band (bw=7MHz);
2) the DTV8 firmware works fine in UHF band (bw=8MHz);
3) the DTV78 firmware works fine in UHF band (bw=8MHz) but it doesn not
work at all in VHF band (bw=7MHz);
In fact, when the DTV78 firmware is loaded and I try to tune a VHF
channel, the frequency lock is ciclically acquired for a second and
immediately lost.
So the proposed patch forces a reload of the DTV7 firmware every time a
7MHz channel is requested.
The only drawback is that channel change from VHF to UHF or viceversa is
slightly slower.
Devices using the D2620 firmwares are unaffected.
Hi Gianluca,
The issues with firmware DTV78 x DTV7/DTV8 are old. No matter what we do,
we end by having troubles, as the issue is Country-dependent. For example,
Australia requires a different firmware than Germany, due to the differences
on the VHF/UHF bands.
I prefer if you could work into a patch that would add some modprobe parameter
to disable the current "autodetection" way, allowing to override the firmware
used for VHF and UHF.
Thanks,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
