Il 10/12/2011 15:51, Mauro Carvalho Chehab ha scritto: > On 08-12-2011 10:56, Gianluca Gennari wrote: >> Hi all, >> this patch replaces the previous one proposed in the thread "xc3028: >> force reload of DTV7 firmware in VHF band with Zarlink demodulator". >> The problem is that the firmware DTV78 works fine in UHF band (8 MHz >> bandwidth) but is not working at all in VHF band (7 MHz bandwidth). >> Reading the comments inside the code, I figured out that the real >> problem could be connected to the formula used to calculate the center >> frequency offset in VHF band. >> >> In fact, removing this adjustment fixed the problem: >> >> if ((priv->cur_fw.type& DTV78)&& freq< 470000000) >> offset -= 500000; >> >> This is coherent to what was implemented for the DTV7 firmware by an >> Australian user: >> >> if (priv->cur_fw.type& DTV7) >> offset += 500000; >> >> In the end, the center frequency is the same for all firmwares (DTV7, >> DTV8, DTV78) and for both 7 and 8 MHz bandwidth. >> Probably, a further offset is hardcoded directly into the firmwares, to >> compensate the difference between 7 and 8 MHz bandwidth. >> >> The final code looks clean and simple, and there is no need for any >> "magic" adjustment: >> >> if (priv->cur_fw.type& DTV6) >> offset = 1750000; >> else /* DTV7 or DTV8 or DTV78 */ >> offset = 2750000; > > > The above comment is better than the one inside the patch. Just add it > there > when submitting the final review. > > Yet, I don't think this is right, at least for firmware 2.7 and bellow. > > What happens with xc3028 devices is that the frequency of the DLL is set > to a > "reference" frequency, and not to the center frequency. The reference > frequency > is 1.25 MHz after the lower frequency. > > The standard-specific firmwares could also have an extra offset, as well > as the > S-CODE tables. In general, the offset for them are 200 kHz, but it seems > that > > Not sure if you're aware, but you can look on each firmware with an > userspace tool > that is part of v4l-utils: > > ~/v4l-utils/utils/xc3028-firmware $ ./firmware-tool --list > /lib/firmware/xc3028-v27.fw > list action > > firmware file name: /lib/firmware/xc3028-v27.fw > firmware name: xc2028 firmware > version: 2.7 (519) > standards: 80 > Firmware 0, type: BASE FW F8MHZ (0x00000003), id: (0000000000000000), > size: 8718 > Firmware 1, type: BASE FW F8MHZ MTS (0x00000007), id: > (0000000000000000), size: 8712 > Firmware 2, type: BASE FW FM (0x00000401), id: (0000000000000000), > size: 8562 > Firmware 3, type: BASE FW FM INPUT1 (0x00000c01), id: > (0000000000000000), size: 8576 > Firmware 4, type: BASE FW (0x00000001), id: (0000000000000000), size: > 8706 > Firmware 5, type: BASE FW MTS (0x00000005), id: (0000000000000000), > size: 8682 > Firmware 6, type: STD FW (0x00000000), id: PAL/BG A2/A > (0000000100000007), size: 161 > Firmware 7, type: STD FW MTS (0x00000004), id: PAL/BG A2/A > (0000000100000007), size: 169 > Firmware 8, type: STD FW (0x00000000), id: PAL/BG A2/B > (0000000200000007), size: 161 > Firmware 9, type: STD FW MTS (0x00000004), id: PAL/BG A2/B > (0000000200000007), size: 169 > Firmware 10, type: STD FW (0x00000000), id: PAL/BG NICAM/A > (0000000400000007), size: 161 > Firmware 11, type: STD FW MTS (0x00000004), id: PAL/BG NICAM/A > (0000000400000007), size: 169 > Firmware 12, type: STD FW (0x00000000), id: PAL/BG NICAM/B > (0000000800000007), size: 161 > Firmware 13, type: STD FW MTS (0x00000004), id: PAL/BG NICAM/B > (0000000800000007), size: 169 > Firmware 14, type: STD FW (0x00000000), id: PAL/DK A2 > (00000003000000e0), size: 161 > Firmware 15, type: STD FW MTS (0x00000004), id: PAL/DK A2 > (00000003000000e0), size: 169 > Firmware 16, type: STD FW (0x00000000), id: PAL/DK NICAM > (0000000c000000e0), size: 161 > Firmware 17, type: STD FW MTS (0x00000004), id: PAL/DK NICAM > (0000000c000000e0), size: 169 > Firmware 18, type: STD FW (0x00000000), id: SECAM/K1 > (0000000000200000), size: 161 > Firmware 19, type: STD FW MTS (0x00000004), id: SECAM/K1 > (0000000000200000), size: 169 > Firmware 20, type: STD FW (0x00000000), id: SECAM/K3 > (0000000004000000), size: 161 > Firmware 21, type: STD FW MTS (0x00000004), id: SECAM/K3 > (0000000004000000), size: 169 > Firmware 22, type: STD FW D2633 DTV6 ATSC (0x00010030), id: > (0000000000000000), size: 149 > Firmware 23, type: STD FW D2620 DTV6 QAM (0x00000068), id: > (0000000000000000), size: 149 > Firmware 24, type: STD FW D2633 DTV6 QAM (0x00000070), id: > (0000000000000000), size: 149 > Firmware 25, type: STD FW D2620 DTV7 (0x00000088), id: > (0000000000000000), size: 149 > Firmware 26, type: STD FW D2633 DTV7 (0x00000090), id: > (0000000000000000), size: 149 > Firmware 27, type: STD FW D2620 DTV78 (0x00000108), id: > (0000000000000000), size: 149 > Firmware 28, type: STD FW D2633 DTV78 (0x00000110), id: > (0000000000000000), size: 149 > Firmware 29, type: STD FW D2620 DTV8 (0x00000208), id: > (0000000000000000), size: 149 > Firmware 30, type: STD FW D2633 DTV8 (0x00000210), id: > (0000000000000000), size: 149 > Firmware 31, type: STD FW FM (0x00000400), id: (0000000000000000), > size: 135 > Firmware 32, type: STD FW (0x00000000), id: PAL/I (0000000000000010), > size: 161 > Firmware 33, type: STD FW MTS (0x00000004), id: PAL/I > (0000000000000010), size: 169 > Firmware 34, type: STD FW (0x00000000), id: SECAM/L AM > (0000001000400000), size: 169 > Firmware 35, type: STD FW (0x00000000), id: SECAM/L NICAM > (0000000c00400000), size: 161 > Firmware 36, type: STD FW (0x00000000), id: SECAM/Lc > (0000000000800000), size: 161 > Firmware 37, type: STD FW (0x00000000), id: NTSC/M Kr > (0000000000008000), size: 161 > Firmware 38, type: STD FW LCD (0x00001000), id: NTSC/M Kr > (0000000000008000), size: 161 > Firmware 39, type: STD FW LCD NOGD (0x00003000), id: NTSC/M Kr > (0000000000008000), size: 161 > Firmware 40, type: STD FW MTS (0x00000004), id: NTSC/M Kr > (0000000000008000), size: 169 > Firmware 41, type: STD FW (0x00000000), id: NTSC PAL/M PAL/N > (000000000000b700), size: 161 > Firmware 42, type: STD FW LCD (0x00001000), id: NTSC PAL/M PAL/N > (000000000000b700), size: 161 > Firmware 43, type: STD FW LCD NOGD (0x00003000), id: NTSC PAL/M PAL/N > (000000000000b700), size: 161 > Firmware 44, type: STD FW (0x00000000), id: NTSC/M Jp > (0000000000002000), size: 161 > Firmware 45, type: STD FW MTS (0x00000004), id: NTSC PAL/M PAL/N > (000000000000b700), size: 169 > Firmware 46, type: STD FW MTS LCD (0x00001004), id: NTSC PAL/M PAL/N > (000000000000b700), size: 169 > Firmware 47, type: STD FW MTS LCD NOGD (0x00003004), id: NTSC PAL/M > PAL/N (000000000000b700), size: 169 > Firmware 48, type: SCODE FW HAS IF (0x60000000), IF = 3.28 MHz id: > (0000000000000000), size: 192 > Firmware 49, type: SCODE FW HAS IF (0x60000000), IF = 3.30 MHz id: > (0000000000000000), size: 192 > Firmware 50, type: SCODE FW HAS IF (0x60000000), IF = 3.44 MHz id: > (0000000000000000), size: 192 > Firmware 51, type: SCODE FW HAS IF (0x60000000), IF = 3.46 MHz id: > (0000000000000000), size: 192 > Firmware 52, type: SCODE FW DTV6 ATSC OREN36 HAS IF (0x60210020), IF = > 3.80 MHz id: (0000000000000000), size: 192 > Firmware 53, type: SCODE FW HAS IF (0x60000000), IF = 4.00 MHz id: > (0000000000000000), size: 192 > Firmware 54, type: SCODE FW DTV6 ATSC TOYOTA388 HAS IF (0x60410020), IF > = 4.08 MHz id: (0000000000000000), size: 192 > Firmware 55, type: SCODE FW HAS IF (0x60000000), IF = 4.20 MHz id: > (0000000000000000), size: 192 > Firmware 56, type: SCODE FW MONO HAS IF (0x60008000), IF = 4.32 MHz id: > NTSC/M Kr (0000000000008000), size: 192 > Firmware 57, type: SCODE FW HAS IF (0x60000000), IF = 4.45 MHz id: > (0000000000000000), size: 192 > Firmware 58, type: SCODE FW MTS LCD NOGD MONO IF HAS IF (0x6002b004), > IF = 4.50 MHz id: NTSC PAL/M PAL/N (000000000000b700), size: 192 > Firmware 59, type: SCODE FW LCD NOGD IF HAS IF (0x60023000), IF = 4.60 > MHz id: NTSC/M Kr (0000000000008000), size: 192 > Firmware 60, type: SCODE FW DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 HAS IF > (0x620003e0), IF = 4.76 MHz id: (0000000000000000), size: 192 > Firmware 61, type: SCODE FW HAS IF (0x60000000), IF = 4.94 MHz id: > (0000000000000000), size: 192 > Firmware 62, type: SCODE FW HAS IF (0x60000000), IF = 5.26 MHz id: > (0000000000000000), size: 192 > Firmware 63, type: SCODE FW MONO HAS IF (0x60008000), IF = 5.32 MHz id: > PAL/BG A2 NICAM (0000000f00000007), size: 192 > Firmware 64, type: SCODE FW DTV7 DTV78 DTV8 DIBCOM52 CHINA HAS IF > (0x65000380), IF = 5.40 MHz id: (0000000000000000), size: 192 > Firmware 65, type: SCODE FW DTV6 ATSC OREN538 HAS IF (0x60110020), IF = > 5.58 MHz id: (0000000000000000), size: 192 > Firmware 66, type: SCODE FW HAS IF (0x60000000), IF = 5.64 MHz id: > PAL/BG A2 (0000000300000007), size: 192 > Firmware 67, type: SCODE FW HAS IF (0x60000000), IF = 5.74 MHz id: > PAL/BG NICAM (0000000c00000007), size: 192 > Firmware 68, type: SCODE FW HAS IF (0x60000000), IF = 5.90 MHz id: > (0000000000000000), size: 192 > Firmware 69, type: SCODE FW MONO HAS IF (0x60008000), IF = 6.00 MHz id: > PAL/DK PAL/I SECAM/K3 SECAM/L SECAM/Lc NICAM (0000000c04c000f0), size: 192 > Firmware 70, type: SCODE FW DTV6 QAM ATSC LG60 F6MHZ HAS IF > (0x68050060), IF = 6.20 MHz id: (0000000000000000), size: 192 > Firmware 71, type: SCODE FW HAS IF (0x60000000), IF = 6.24 MHz id: > PAL/I (0000000000000010), size: 192 > Firmware 72, type: SCODE FW MONO HAS IF (0x60008000), IF = 6.32 MHz id: > SECAM/K1 (0000000000200000), size: 192 > Firmware 73, type: SCODE FW HAS IF (0x60000000), IF = 6.34 MHz id: > SECAM/K1 (0000000000200000), size: 192 > Firmware 74, type: SCODE FW MONO HAS IF (0x60008000), IF = 6.50 MHz id: > PAL/DK SECAM/K3 SECAM/L NICAM (0000000c044000e0), size: 192 > Firmware 75, type: SCODE FW DTV6 ATSC ATI638 HAS IF (0x60090020), IF = > 6.58 MHz id: (0000000000000000), size: 192 > Firmware 76, type: SCODE FW HAS IF (0x60000000), IF = 6.60 MHz id: > PAL/DK A2 (00000003000000e0), size: 192 > Firmware 77, type: SCODE FW MONO HAS IF (0x60008000), IF = 6.68 MHz id: > PAL/DK A2 (00000003000000e0), size: 192 > Firmware 78, type: SCODE FW DTV6 ATSC TOYOTA794 HAS IF (0x60810020), IF > = 8.14 MHz id: (0000000000000000), size: 192 > Firmware 79, type: SCODE FW HAS IF (0x60000000), IF = 8.20 MHz id: > (0000000000000000), size: 192 > > I did a quick check here with firmware v2.7. The standard firmwares for > DTV7 and DTV8 are equal. > The firmware for DTV78 has one byte with a different value. So, it seems > that the offset for > DVB7 should be different than the one for DVB8. > > Regards, > Mauro > >
Hi Mauro, thanks for the review and the info about the firmware tool. The interesting thing is that DTV7 and DTV8 are identical: this means there is no info about bandwidth coded inside them. Also, the SCODE table (firmware 60) is the same for all 3 firmware types: in fact, this is what is loaded when selecting a VHF frequency, just after a replug of my Terratec stick: [ 8701.753768] xc2028 0-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 8702.804153] xc2028 0-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000. [ 8702.819274] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. and the, after selecting a UHF frequency: [ 8758.361730] xc2028 0-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [ 8758.376951] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. So, if the center frequency is indeed the same in all cases, the variable part could be the so called "reference frequency"; this frequency could be 1.25 MHz for 8 MHz channels and 1.75 MHz for 7 MHz channels. But those are just conjectures; maybe in the comment I should just specify what I did and why I did it, removing the sentence with "probably...". Best regards, Gianluca -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
