Hi Laurent, On Thu, Dec 15, 2011 at 01:54:52PM +0100, Laurent Pinchart wrote: > Hi Sakari, > > On Thursday 15 December 2011 12:53:03 Sakari Ailus wrote: > > On Thu, Dec 15, 2011 at 11:28:06AM +0100, Laurent Pinchart wrote: > > > On Thursday 15 December 2011 10:50:34 Sakari Ailus wrote: > > > > Configure CSI-2 phy based on platform data in the ISP driver rather > > > > than in platform code. > > > > > > > > Signed-off-by: Sakari Ailus <sakari.ai...@iki.fi> > > [snip] > > > > > diff --git a/drivers/media/video/omap3isp/ispcsiphy.c > > > > b/drivers/media/video/omap3isp/ispcsiphy.c index 5be37ce..52af308 > > > > 100644 --- a/drivers/media/video/omap3isp/ispcsiphy.c > > > > +++ b/drivers/media/video/omap3isp/ispcsiphy.c > > > > @@ -28,6 +28,8 @@ > > [snip] > > > > > +int omap3isp_csiphy_config(struct isp_device *isp, > > > > + struct v4l2_subdev *csi2_subdev, > > > > + struct v4l2_subdev *sensor, > > > > + struct v4l2_mbus_framefmt *sensor_fmt) > > > > > > The number of lanes can depend on the format. Wouldn't it be better to > > > add a subdev operation to query the sensor for its bus configuration > > > instead of relying on ISP platform data ? > > > > In principle, yes. That's an interesting point; how this kind of information > > would best be delivered? > > There are two separate information that need to be delivered: > > - how the lanes are connected on the board > - which lanes are used by the sensor, and for what purpose > > The first information must be supplied through platform data, either to the > sensor driver or the OMAP3 ISP driver (or both). As the second information
Both, and both of them may require configuring it. I don't know sensors that allow it, but the CSI-2 receiver is flexible in lane mapping. > comes from the sensor, my idea was to provide the first to the sensor, and to > query the sensor in the OMAP3 ISP driver for the full configuration. In theory, at least, configurations with less lanes need to be specified separately. There may be limitations on how the lanes can be used, say, using two out of three lanes may require leaving a aparticular lane unused. > > The number of lanes might be something the user would want to touch, but > > I'm not entirely sure. You achieve more functionality by providing that > > flexibility to the user but I don't see need for configuring that --- > > still getting the number of lanes could be interesting. > > If we want to expose such configuration I think we should do it on the > sensor, > not the ISP. I agree. ... > > > > @@ -355,6 +358,22 @@ static int isp_video_validate_pipeline(struct > > > > isp_pipeline *pipe) fmt_source.format.height != fmt_sink.format.height) > > > > > > > > return -EPIPE; > > > > > > > > + /* Configure CSI-2 receiver based on sensor format. */ > > > > + if (_subdev == &isp->isp_csi2a.subdev > > > > + || _subdev == &isp->isp_csi2c.subdev) { > > > > + if (cpu_is_omap3630()) { > > > > + /* > > > > + * FIXME: CSI-2 is supported only on > > > > + * the 3630! > > > > + */ > > > > > > Is it ? Or do you mean by the driver ? What would it take to support it > > > on OMAP34xx and OMAP35xx ? > > > > I have no way to test it on the OMAP 3430 since I have no CSI-2 sensor > > connected to it. As a matter of fact I've never had one, so I don't really > > know. > > What about assuming it works on the 34xx and 35xx as well ? I'll change it so. -- Sakari Ailus e-mail: sakari.ai...@iki.fi jabber/XMPP/Gmail: sai...@retiisi.org.uk -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html