Instead of using dvb_frontend_parameters struct, that were
designed for a subset of the supported standards, use the DVBv5
cache information.

Also, fill the supported delivery systems at dvb_frontend_ops
struct.

Signed-off-by: Mauro Carvalho Chehab <mche...@redhat.com>
---
 drivers/media/dvb/frontends/tda10086.c |   46 ++++++++++++++++----------------
 1 files changed, 23 insertions(+), 23 deletions(-)

diff --git a/drivers/media/dvb/frontends/tda10086.c 
b/drivers/media/dvb/frontends/tda10086.c
index 8501100..81fa57b 100644
--- a/drivers/media/dvb/frontends/tda10086.c
+++ b/drivers/media/dvb/frontends/tda10086.c
@@ -267,7 +267,7 @@ static int tda10086_send_burst (struct dvb_frontend* fe, 
fe_sec_mini_cmd_t minic
 }
 
 static int tda10086_set_inversion(struct tda10086_state *state,
-                                 struct dvb_frontend_parameters *fe_params)
+                                 struct dtv_frontend_properties *fe_params)
 {
        u8 invval = 0x80;
 
@@ -292,7 +292,7 @@ static int tda10086_set_inversion(struct tda10086_state 
*state,
 }
 
 static int tda10086_set_symbol_rate(struct tda10086_state *state,
-                                   struct dvb_frontend_parameters *fe_params)
+                                   struct dtv_frontend_properties *fe_params)
 {
        u8 dfn = 0;
        u8 afs = 0;
@@ -303,7 +303,7 @@ static int tda10086_set_symbol_rate(struct tda10086_state 
*state,
        u32 tmp;
        u32 bdr;
        u32 bdri;
-       u32 symbol_rate = fe_params->u.qpsk.symbol_rate;
+       u32 symbol_rate = fe_params->symbol_rate;
 
        dprintk ("%s %i\n", __func__, symbol_rate);
 
@@ -367,13 +367,13 @@ static int tda10086_set_symbol_rate(struct tda10086_state 
*state,
 }
 
 static int tda10086_set_fec(struct tda10086_state *state,
-                           struct dvb_frontend_parameters *fe_params)
+                           struct dtv_frontend_properties *fe_params)
 {
        u8 fecval;
 
-       dprintk ("%s %i\n", __func__, fe_params->u.qpsk.fec_inner);
+       dprintk ("%s %i\n", __func__, fe_params->fec_inner);
 
-       switch(fe_params->u.qpsk.fec_inner) {
+       switch(fe_params->fec_inner) {
        case FEC_1_2:
                fecval = 0x00;
                break;
@@ -409,9 +409,9 @@ static int tda10086_set_fec(struct tda10086_state *state,
        return 0;
 }
 
-static int tda10086_set_frontend(struct dvb_frontend* fe,
-                                struct dvb_frontend_parameters *fe_params)
+static int tda10086_set_frontend(struct dvb_frontend* fe)
 {
+       struct dtv_frontend_properties *fe_params = &fe->dtv_property_cache;
        struct tda10086_state *state = fe->demodulator_priv;
        int ret;
        u32 freq = 0;
@@ -452,12 +452,12 @@ static int tda10086_set_frontend(struct dvb_frontend* fe,
        tda10086_write_mask(state, 0x10, 0x40, 0x40);
        tda10086_write_mask(state, 0x00, 0x01, 0x00);
 
-       state->symbol_rate = fe_params->u.qpsk.symbol_rate;
+       state->symbol_rate = fe_params->symbol_rate;
        state->frequency = fe_params->frequency;
        return 0;
 }
 
-static int tda10086_get_frontend(struct dvb_frontend* fe, struct 
dvb_frontend_parameters *fe_params)
+static int tda10086_get_frontend(struct dvb_frontend* fe, struct 
dtv_frontend_properties *fe_params)
 {
        struct tda10086_state* state = fe->demodulator_priv;
        u8 val;
@@ -467,7 +467,7 @@ static int tda10086_get_frontend(struct dvb_frontend* fe, 
struct dvb_frontend_pa
        dprintk ("%s\n", __func__);
 
        /* check for invalid symbol rate */
-       if (fe_params->u.qpsk.symbol_rate < 500000)
+       if (fe_params->symbol_rate < 500000)
                return -EINVAL;
 
        /* calculate the updated frequency (note: we convert from Hz->kHz) */
@@ -516,34 +516,34 @@ static int tda10086_get_frontend(struct dvb_frontend* fe, 
struct dvb_frontend_pa
                tmp |= 0xffffff00;
        tmp = (tmp * 480 * (1<<1)) / 128;
        tmp = ((state->symbol_rate/1000) * tmp) / (1000000/1000);
-       fe_params->u.qpsk.symbol_rate = state->symbol_rate + tmp;
+       fe_params->symbol_rate = state->symbol_rate + tmp;
 
        /* the FEC */
        val = (tda10086_read_byte(state, 0x0d) & 0x70) >> 4;
        switch(val) {
        case 0x00:
-               fe_params->u.qpsk.fec_inner = FEC_1_2;
+               fe_params->fec_inner = FEC_1_2;
                break;
        case 0x01:
-               fe_params->u.qpsk.fec_inner = FEC_2_3;
+               fe_params->fec_inner = FEC_2_3;
                break;
        case 0x02:
-               fe_params->u.qpsk.fec_inner = FEC_3_4;
+               fe_params->fec_inner = FEC_3_4;
                break;
        case 0x03:
-               fe_params->u.qpsk.fec_inner = FEC_4_5;
+               fe_params->fec_inner = FEC_4_5;
                break;
        case 0x04:
-               fe_params->u.qpsk.fec_inner = FEC_5_6;
+               fe_params->fec_inner = FEC_5_6;
                break;
        case 0x05:
-               fe_params->u.qpsk.fec_inner = FEC_6_7;
+               fe_params->fec_inner = FEC_6_7;
                break;
        case 0x06:
-               fe_params->u.qpsk.fec_inner = FEC_7_8;
+               fe_params->fec_inner = FEC_7_8;
                break;
        case 0x07:
-               fe_params->u.qpsk.fec_inner = FEC_8_9;
+               fe_params->fec_inner = FEC_8_9;
                break;
        }
 
@@ -701,7 +701,7 @@ static void tda10086_release(struct dvb_frontend* fe)
 }
 
 static struct dvb_frontend_ops tda10086_ops = {
-
+       .delsys = { SYS_DVBS },
        .info = {
                .name     = "Philips TDA10086 DVB-S",
                .type     = FE_QPSK,
@@ -722,8 +722,8 @@ static struct dvb_frontend_ops tda10086_ops = {
        .sleep = tda10086_sleep,
        .i2c_gate_ctrl = tda10086_i2c_gate_ctrl,
 
-       .set_frontend_legacy = tda10086_set_frontend,
-       .get_frontend_legacy = tda10086_get_frontend,
+       .set_frontend = tda10086_set_frontend,
+       .get_frontend = tda10086_get_frontend,
        .get_tune_settings = tda10086_get_tune_settings,
 
        .read_status = tda10086_read_status,
-- 
1.7.8.352.g876a6

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to