By default, initialize the frontend current delivery system with
the first one. This warrants that a DVBv3 application will be able
to tune to it, after the removal of ops->init.type filling at
the drivers.
Signed-off-by: Mauro Carvalho Chehab <mche...@redhat.com>
---
drivers/media/dvb/dvb-core/dvb_frontend.c | 18 +++++++++++++-----
1 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c
b/drivers/media/dvb/dvb-core/dvb_frontend.c
index d030cd3..b72b87e 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -873,17 +873,22 @@ static int dvb_frontend_clear_cache(struct dvb_frontend
*fe)
memset(c, 0, sizeof(struct dtv_frontend_properties));
c->state = DTV_CLEAR;
- c->delivery_system = SYS_UNDEFINED;
- c->inversion = INVERSION_AUTO;
- c->fec_inner = FEC_AUTO;
+
+ c->delivery_system = fe->ops.delsys[0];
+
c->transmission_mode = TRANSMISSION_MODE_AUTO;
- c->bandwidth_hz = BANDWIDTH_AUTO;
+ c->bandwidth_hz = 0; /* AUTO */
c->guard_interval = GUARD_INTERVAL_AUTO;
c->hierarchy = HIERARCHY_AUTO;
- c->symbol_rate = QAM_AUTO;
+ c->symbol_rate = 0;
c->code_rate_HP = FEC_AUTO;
c->code_rate_LP = FEC_AUTO;
+ c->fec_inner = FEC_AUTO;
c->rolloff = ROLLOFF_AUTO;
+ c->voltage = SEC_VOLTAGE_OFF;
+ c->modulation = QAM_AUTO;
+ c->sectone = SEC_TONE_OFF;
+ c->pilot = PILOT_AUTO;
c->isdbt_partial_reception = -1;
c->isdbt_sb_mode = -1;
@@ -898,6 +903,9 @@ static int dvb_frontend_clear_cache(struct dvb_frontend *fe)
c->layer[i].segment_count = -1;
}
+ c->isdbs_ts_id = 0;
+ c->dvbt2_plp_id = 0;
+
return 0;
}
--
1.7.8.352.g876a6
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
