I've got a TBS 6920 PCI-E DVB-S2 card, which explicitly claims Linux
compatibility on the box. It works as a satellite receiver, but I get no
response from the remote control (trying to read /dev/input/event5). I
think this is its entry in /proc/bus/input/devices:
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S:
Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input5
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
And lspci -v:
03:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video
and Audio Decoder (rev 02)
Subsystem: Device 6920:8888
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at fea00000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express Endpoint, MSI 00
Capabilities: [80] Power Management version 2
Capabilities: [90] Vital Product Data
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [100] Advanced Error Reporting
Capabilities: [200] Virtual Channel
Kernel driver in use: cx23885
Is there an extra module I need to load to make it work, or is any work
being done on this if it isn't supported yet? Is there anything I can do
to help? I'm an experienced C programmer, but not a kernel hacker.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
