On Wednesday, February 22, 2012 21:33:29 Ondrej Zary wrote:
> On Saturday 18 February 2012 17:33:32 Ondrej Zary wrote:
> > Hello,
> > there are some ISA radio cards with PnP support (e.g. SF16-FMI) but the new
> > ISA radio framework has no PnP support.
> >
> > I got AOpen FX-3D/Pro Radio card which is AD1816 with Gemtek radio - and
> > with PnP. But radio-gemtek fails to load because the radio I/O port is not
> > enabled (and the driver does not support PnP).
> >
> > Tried to add PnP support to radio-isa but failed. Splitted non-isa_driver
> > related parts from radio_isa_probe() to a separate function and tried to
> > create radio_isa_pnp_probe() only to realize that I'm not able to access
> > struct radio_isa_driver.
> >
> > radio_isa_probe() relies on the fact that "driver" (struct isa_driver) is
> > the first element of struct radio_isa_driver, so these two structs have the
> > same pointer:
> > HW radio driver registers the driver by calling:
> > isa_register_driver(&gemtek_driver.driver, GEMTEK_MAX);
> > radio_isa_probe() in radio-isa.c does:
> > struct radio_isa_driver *drv = pdev->platform_data;
> >
> > So adding struct pnp_driver to struct radio_isa_driver does not seem to be
> > possible.
>
> Adding PnP support to original radio-gemtek (before conversion to ISA radio
> framework) is easy. A patch like this (mostly copied from radio-cadet) allows
> radio on AOpen FX-3D/Pro Radio card to work.
> But how to do this with the new driver?
I've been looking at that and I think the best way is to add radio_isa_pnp_probe
and radio_isa_pnp_remove functions that can be used with the pnp framework.
Both radio_isa_probe and radio_isa_pnp_probe call the same probe() function that
gets the radio_isa_driver pointer.
The struct radio_isa_driver should probably be modified as follows:
struct radio_isa_driver {
struct isa_driver *isa_drv;
struct pnp_driver *pnp_drv;
const struct radio_isa_ops *ops;
...
Or perhaps even better:
struct radio_isa_driver {
union {
struct isa_driver *isa_drv;
struct pnp_driver *pnp_drv;
};
const struct radio_isa_ops *ops;
...
radio_isa_querycap uses driver.name, so I suspect struct radio_isa_driver
should be extended with a const char *name that is set correctly by either
radio_isa_probe or radio_isa_pnp_probe.
Another alternative seems to be what radio-sf16fmi.c does. It uses low-level
pnp functions but not pnp_driver. This approach should fit easily into the
radio-isa framework.
Regards,
Hans
>
>
> --- a/drivers/media/radio/radio-gemtek.c
> +++ b/drivers/media/radio/radio-gemtek.c
> @@ -23,6 +23,7 @@
> #include <linux/videodev2.h> /* kernel radio structs */
> #include <linux/mutex.h>
> #include <linux/io.h> /* outb, outb_p */
> +#include <linux/pnp.h>
> #include <media/v4l2-ioctl.h>
> #include <media/v4l2-device.h>
>
> @@ -329,6 +330,46 @@ static int gemtek_verify(struct gemtek *gt, int port)
> return 1;
> }
>
> +#ifdef CONFIG_PNP
> +
> +static struct pnp_device_id gemtek_pnp_devices[] = {
> + /* AOpen FX-3D/Pro Radio */
> + {.id = "ADS7183", .driver_data = 0},
> + {.id = ""}
> +};
> +
> +MODULE_DEVICE_TABLE(pnp, gemtek_pnp_devices);
> +
> +static int gemtek_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id
> *dev_id)
> +{
> + if (!dev)
> + return -ENODEV;
> + /* only support one device */
> + if (io > 0)
> + return -EBUSY;
> +
> + if (!pnp_port_valid(dev, 0))
> + return -ENODEV;
> +
> + io = pnp_port_start(dev, 0);
> +
> + printk(KERN_INFO "radio-gemtek: PnP reports device at %#x\n", io);
> +
> + return io;
> +}
> +
> +static struct pnp_driver gemtek_pnp_driver = {
> + .name = "radio-gemtek",
> + .id_table = gemtek_pnp_devices,
> + .probe = gemtek_pnp_probe,
> + .remove = NULL,
> +};
> +
> +#else
> +static struct pnp_driver gemtek_pnp_driver;
> +#endif
> +
> +
> /*
> * Automatic probing for card.
> */
> @@ -536,8 +577,11 @@ static int __init gemtek_init(void)
> mutex_init(>->lock);
>
> gt->verified = -1;
> + if (io < 0)
> + pnp_register_driver(&gemtek_pnp_driver);
> + else
> + gemtek_probe(gt);
> gt->io = io;
> - gemtek_probe(gt);
> if (gt->io) {
> if (!request_region(gt->io, 1, "gemtek")) {
> v4l2_err(v4l2_dev, "I/O port 0x%x already in use.\n",
> gt->io);
> @@ -608,6 +652,7 @@ static void __exit gemtek_exit(void)
> video_unregister_device(>->vdev);
> v4l2_device_unregister(>->v4l2_dev);
> release_region(gt->io, 1);
> + pnp_unregister_driver(&gemtek_pnp_driver);
> }
>
> module_init(gemtek_init);
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html