Hi Sakari,
On Wednesday 29 February 2012 07:41:50 Sakari Ailus wrote:
> On Mon, Feb 27, 2012 at 04:38:49PM +0100, Laurent Pinchart wrote:
> > On Monday 20 February 2012 03:57:11 Sakari Ailus wrote:
> > > From: Sakari Ailus <[email protected]>
> > >
> > > Add driver for SMIA++/SMIA image sensors. The driver exposes the sensor
> > > as three subdevs, pixel array, binner and scaler --- in case the device
> > > has a scaler.
> > >
> > > Currently it relies on the board code for external clock handling. There
> > > is no fast way out of this dependency before the ISP drivers (omap3isp)
> > > among others will be able to export that clock through the clock
> > > framework instead.
> > >
> > > Signed-off-by: Sakari Ailus <[email protected]>
[snip]
> > > +
> > > + dev_dbg(&client->dev, "format_model_type %s\n",
> > > + fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE
> > > + ? "2 byte" :
> > > + fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE
> > > + ? "4 byte" : "is simply bad");
> >
> > Simply ? :-)
>
> Yeah, well, it's not that complex. :-) Do you think I should change that to
> something else?
No, that's fine. I just found it funny that the format could be "simply bad"
:-)
[snip]
> > > + if (embedded_start == -1 || embedded_end == -1)
> > > + embedded_start = embedded_end = 0;
> >
> > One assignment per line please.
>
> I'm not sure if you gain any clarity with that, but I guess it's a norm
> still. Fixed.
It's very easy to miss one of the assignments if you group them in a single
line.Or at least it is for me.
[snip]
> > > + case V4L2_CID_VBLANK:
> > > + exposure = sensor->exposure->val;
> > > +
> > > + __smiapp_update_exposure_limits(sensor);
> > > +
> > > + if (exposure > sensor->exposure->maximum) {
> > > + sensor->exposure->val =
> > > + sensor->exposure->maximum;
> > > + rval = smiapp_set_ctrl(
> > > + sensor->exposure);
> >
> > Shouldn't you call the V4L2 control API here instead ? Otherwise no
> > control change event will be generated for the exposure time. Will this
> > work as expected if the user sets the exposure time in the same
> > VIDIOC_S_EXT_CTRLS call ?
>
> Good question. I'm holding the ctrl handler lock here and so can't use the
> regular functions to perform the change. Perhaps time to implement
> __v4l2_subdev_s_ext_ctrls() and use that?
Do you mean __v4l2_ctrl_s_ctrl() ? I think it would make sense, yes.
> > > + if (sensor->pixel_array->ctrl_handler.error) {
> > > + dev_err(&client->dev,
> > > + "pixel array controls initialization failed (%d)\n",
> > > + sensor->pixel_array->ctrl_handler.error);
> >
> > Shouldn't you call v4l2_ctrl_handler_free() here ?
>
> Yes. Fixed.
>
> > > + return sensor->pixel_array->ctrl_handler.error;
> > > + }
> > > +
> > > + sensor->pixel_array->sd.ctrl_handler =
> > > + &sensor->pixel_array->ctrl_handler;
> > > +
> > > + v4l2_ctrl_cluster(2, &sensor->hflip);
> >
> > Shouldn't you move this before the control handler check ?
>
> Why? It can't fail.
I thought it could fail. You could then leave it here, but it would be easier
from a maintenance point of view to check the error code after completing all
control-related initialization, as it would avoid introducing a bug if for
some reason the v4l2_ctrl_cluster() function needs to return an error later.
[snip]
> > > +static int smiapp_update_mode(struct smiapp_sensor *sensor)
> > > +{
> >
> > This function isn't protected by the sensor mutex when called from
> > s_power, but it changes controls. The other call paths seem OK, but you
> > might want to double-check them.
>
> It's actually not an issue. When s_power is being called there are no other
> users and the power_lock serialises it.
Are you sure about that? s_power can be called from both the subdev video node
open() handlers (assuming the sensor is in the pipe).
> I implemented it this way since the control setup acquires the same lock
> that I would have to hold while powering up. The power_lock fixes this
> issue.
>
> I cleaned this up so that I won't take sensor->mutex at all anymore.
[snip]
> > > + dev_dbg(&client->dev, "module 0x%2.2x-0x%4.4x\n",
> >
> > "module 0x%02x-0x%04x\n" (and similarly below) ?
>
> Hmm. %y.yx means exactly y characters of %x. What does %0yx mean?
at least y characters, pad with 0. You can keep %y.yx if you prefer it.
> > > + minfo->manufacturer_id, minfo->model_id);
> > > +
> > > + dev_dbg(&client->dev,
> > > + "module revision 0x%2.2x-0x%2.2x date %2.2d-%2.2d-%2.2d\n",
> > > + minfo->revision_number_major, minfo->revision_number_minor,
> > > + minfo->module_year, minfo->module_month, minfo->module_day);
> > > +
> > > + dev_dbg(&client->dev, "sensor 0x%2.2x-0x%4.4x\n",
> > > + minfo->sensor_manufacturer_id, minfo->sensor_model_id);
> > > +
> > > + dev_dbg(&client->dev,
> > > + "sensor revision 0x%2.2x firmware version 0x%2.2x\n",
> > > + minfo->sensor_revision_number, minfo->sensor_firmware_version);
> > > +
> > > + dev_dbg(&client->dev, "smia version %2.2d smiapp version %2.2d\n",
> > > + minfo->smia_version, minfo->smiapp_version);
> > > +
> >
> > Could you please add a short comment to explain why this is needed ?
>
> The one below?
Yes, the lines below, sorry.
> Some devices just have bad data in these variables. Hopefully the other
> variables have better stuff.
I knew why this was needed, but other readers might not :-) That's why a
comment would be good.
> The lvalues are module parameters whereas the rvalues are sensor parameters.
>
> > > + if (!minfo->manufacturer_id && !minfo->model_id) {
> > > + minfo->manufacturer_id = minfo->sensor_manufacturer_id;
> > > + minfo->model_id = minfo->sensor_model_id;
> > > + minfo->revision_number_major = minfo->sensor_revision_number;
> > > + }
> > > +
> > > + for (i = 0; i < ARRAY_SIZE(smiapp_module_idents); i++) {
> > > + if (smiapp_module_idents[i].manufacturer_id
> > > + != minfo->manufacturer_id)
> > > + continue;
> > > + if (smiapp_module_idents[i].model_id != minfo->model_id)
> > > + continue;
> > > + if (smiapp_module_idents[i].flags
> > > + & SMIAPP_MODULE_IDENT_FLAG_REV_LE) {
> > > + if (smiapp_module_idents[i].revision_number_major
> > > + < minfo->revision_number_major)
> > > + continue;
> > > + } else {
> > > + if (smiapp_module_idents[i].revision_number_major
> > > + != minfo->revision_number_major)
> > > + continue;
> > > + }
> > > +
> > > + minfo->name = smiapp_module_idents[i].name;
> > > + minfo->quirk = smiapp_module_idents[i].quirk;
> > > + break;
> > > + }
> > > +
> > > + if (i >= ARRAY_SIZE(smiapp_module_idents))
> > > + dev_warn(&client->dev, "no quirks for this module\n");
> >
> > Maybe a message such as "unknown SMIA++ module - trying generic support"
> > would be better ? Many of the known modules have no quirks.
>
> I'd like to think it as a positive message of the conformance of the sensor
> --- still it may inform that the quirks are actually missing. What do you
> think?
In that case I think something similar to my message is better :-) I agree
about the meaning the message should convey.
> > > +
> > > + dev_dbg(&client->dev, "the sensor is called %s, ident
> > > %2.2x%4.4x%2.2x\n",
> > > + minfo->name, minfo->manufacturer_id, minfo->model_id,
> > > + minfo->revision_number_major);
> > > +
> > > + strlcpy(subdev->name, sensor->minfo.name, sizeof(subdev->name));
> > > +
> > > + return 0;
> > > +}
[snip]
> > > +static int smiapp_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh
> > > *fh)
> > > +{
> > > + struct smiapp_subdev *ssd = to_smiapp_subdev(sd);
> > > + struct v4l2_subdev_selection sel;
> > > + struct v4l2_rect *try_sel;
> > > + int i;
> > > + int rval;
> > > +
> > > + mutex_lock(&ssd->sensor->power_mutex);
> > > + mutex_lock(&ssd->sensor->mutex);
> > > +
> > > + for (i = 0; i < ssd->npads; i++) {
> > > + struct v4l2_subdev_format fmt;
> > > + struct v4l2_mbus_framefmt *try_fmt;
> > > +
> > > + fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > > + fmt.pad = i;
> > > + __smiapp_get_format(sd, fh, &fmt);
> > > + try_fmt = v4l2_subdev_get_try_format(fh, i);
> > > + *try_fmt = fmt.format;
> > > +
> > > + sel.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > > + sel.pad = i;
> > > + sel.target = V4L2_SUBDEV_SEL_TGT_CROP_ACTIVE;
> > > + __smiapp_get_selection(sd, fh, &sel);
> > > + try_sel = v4l2_subdev_get_try_crop(fh, i);
> > > + *try_sel = sel.r;
> >
> > Wouldn't it be better to use the default values instead of the active ones
> > here ?
>
> Good question.
>
> > > + }
> > > +
> > > + if (ssd != ssd->sensor->pixel_array) {
> > > + sel.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > > + sel.pad = SMIAPP_PAD_SINK;
> > > + sel.target = V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTIVE;
> > > + __smiapp_get_selection(sd, fh, &sel);
> > > + try_sel = v4l2_subdev_get_try_compose(fh, SMIAPP_PAD_SINK);
> > > + *try_sel = sel.r;
> > > + }
> > > +
> > > + rval = smiapp_set_power(sd, 1);
> > > +
> > > + mutex_unlock(&ssd->sensor->mutex);
> > > +
> > > + if (rval < 0)
> > > + goto out;
> > > +
> > > + /* Was the sensor already powered on? */
> > > + if (ssd->sensor->power_count > 1)
> >
> > power_count is accessed in smiapp_set_power without taking the power_mutex
> > lock. Are two locks really needed ?
>
> Well, now that you mention it, control handler setup function that wouldn't
> take the locks would resolve the issue, I think. Should I create one?
I'd ask Hans about that.
[snip]
> > > --git a/drivers/media/video/smiapp/smiapp-reg.h
> > > b/drivers/media/video/smiapp/smiapp-reg.h new file mode 100644
> > > index 0000000..126ca5b
> > > --- /dev/null
> > > +++ b/drivers/media/video/smiapp/smiapp-reg.h
> >
> > [snip]
> >
> > > +#define SMIAPP_SCALING_CAPABILITY_NONE 0
> > > +#define SMIAPP_SCALING_CAPABILITY_HORIZONTAL 1
> > > +#define SMIAPP_SCALING_CAPABILITY_BOTH 2 /*
> > > horizontal/both */
> >
> > Do you mean horizontal/vertical ?
>
> No. The BOTH capability means that either horizontal or (horizontal and
> vertical) scaling is supported (parentheses for precedence).
I was referring to the comment on the third line.
[snip]
> > > +static uint32_t float_to_u32_mul_1000000(struct i2c_client *client,
> > > + uint32_t phloat)
> >
> > Now that's creative :-)
>
> I couldn't figure out a way to avoid that, unfortunately. There are a few
> corresponding functions in math emulation libraries but it seems onethey
> would require significant changes to be usable for this driver.
I should have been more specific, I was referring to the name 'phloat' :-)
[snip]
> > > diff --git a/drivers/media/video/smiapp/smiapp.h
> > > b/drivers/media/video/smiapp/smiapp.h new file mode 100644
> > > index 0000000..df514dd
> > > --- /dev/null
> > > +++ b/drivers/media/video/smiapp/smiapp.h
> >
> > [snip]
> >
> > > +struct smiapp_module_ident {
> > > + u8 manufacturer_id;
> > > + u16 model_id;
> > > + u8 revision_number_major;
> > > +
> > > + u8 flags;
> > > +
> > > + char *name;
> > > + const struct smiapp_quirk *quirk;
> > > +} __packed;
> >
> > Is there really a need to pack this ? You could just move
> > revision_number_major above model_id to save a couple of bytes and leave
> > packing out.
>
> The order is there for readability, packing to save memory. I can change the
> order, too, if you think it's a good idea.
Packing usually increases the run time (and possibly code size), as the CPU
will need to perform unaligned access. I don't think it's worth it in this
case. At second thought moving the fields around won't save any memory, so I
would just remove __packed.
> > > +#define SMIAPP_IDENT_FQ(manufacturer, model, rev, fl, _name, _quirk)
\
> > > + { .manufacturer_id = manufacturer, \
> > > + .model_id = model, \
> > > + .revision_number_major = rev, \
> > > + .flags = fl, \
> > > + .name = _name, \
> > > + .quirk = _quirk, }
> >
> > Any reason for the strange indentation ?
>
> This is standard indentation in my Emacsitor. Hmm. I think I might be fine
> even if it indented less. It looks like it wouldn't be indended to work that
> way.
Maybe it's time to switch to vi ? :-D
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html