On 10.05.2012 17:14, Mauro Carvalho Chehab wrote:
Em 08-05-2012 10:12, Antti Palosaari escreveu:
Factors behind the changes are mostly coming from the fact current struct
dvb_usb_device_properties contains so many static configuration options.
You cannot change single dvb_usb_device_properties easily (safely) at runtime
since it is usually driver global struct and thus shared between all
the DVB USB driver instances. That fits just fine for the traditional devices
where all configuration is same for the devices having single USB ID.
Nowadays we have more and more devices that are based of chipset vendor
reference designs - even using just single USB ID chipset vendor have given
for that chipset. These reference designs still varies much about used chips
and configurations. Configuring different base chips, USB-bridge, demod,
tuner, and also peripheral properties like dual tuners, remotes and CI is
needed to do runtime because of single USB ID is used for that all.
Drivers waste lots of space with dvb_usb_device_properties, as this struct is
HUGE.
Also, the structure index number need to match the USB ID table index, which
causes
merge troubles from time to time, breaking existing cards when new ones are
added.
Also, if the remote controller is different, a series of data needs to be
duplicated
into a separate entry.
Yes, that was one thing what I have keep in my mind. Due to I planned to
move remote keytable same place as a device name and USB-IDs are (as
later in that RFC was defined).
IMHO, it would be better to re-design it to avoid wasting space without need.
Could be clearer situation but also much more work. Implementing all
issues mentioned by this RFC should reduce used space a lot, I think
likely 50% or so.
My personal innovator behind all these is problems I met when developing AF9015
and AF9035 drivers. Also RTL2831U and RTL2832U are kinda similar and have given
some more motivation.
Here is small list what I am planning to do. It is surely so much work that
everything is not possible, but lets try to select most important and easiest
as a higher priority.
resume / suspend support
-------------------
* very important feature
* crashes currently when DVB USB tries to download firmware when resuming from
suspend
read_config1
-------------------
* new callback to do initial tweaks
* very first callback
* is that really needed?
Calling it as "read_config1" is not nice, as "1" has no strong meaning.
It would be better to name it as "read_config_early", if this is needed.
I think I will drop that, after all I think it is not much needed. The
idea for that was something like "probe chipset version" for firmware
select as there is some chipset selecting firmware according to chip
revision. But such small decisions are better to made inside firmware
download callback. Also due to that static firmware name should be
replaced by callback that selects firmware.
read_mac_address => read_config2
-------------------
* rename it read_config2 or read_config if read_config1 is not implemented at
all
"read_config" seems a good name for it.
* rename old callback and extend it usage as a more general
* only 8 devices use currently
* when returned mac != 0 => print mac address as earlier, otherwise work as a
general callback
Please, don't do that. Different behaviors if mac is filled (or not) is a very
bad idea.
Actually look it like a extended behaviour (MAC address is extended
behaviour of read_config). MAC address is read from the eeprom and so it
device configuration on many cases. There was only 8 devices using MAC
address so own callback for it is waste of space.
For my eyes returning MAC address as a .read_config() parameter is
something like very good idea.
new callback init()
-------------------
* called after tuner attach to initialize rest of device
* good place to do some general settings
- configure endpoints
- configure remote controller
- configure + attach CI
change DVB-USB to dynamic debug
-------------------
* use Kernel new dynamic debugs instead of own proprietary system
download_firmware
-------------------
* struct usb_device => struct dvb_usb_device
* we need access for the DVB USB driver state in every callback
identify_state
-------------------
* struct usb_device => struct dvb_usb_device
* we need access for the DVB USB driver state in every callback
IMO, all callbacks should use the same argument (either usb_device or
dvb_usb_device).
YES! That is the reason I am changing it :)
All callbacks inside DVB-USB should get pointer to dvb_usb_device or
some other pointer which is deeper than dvb_usb_device (like ptr to FE).
The requirement of changing that is coming from the fact there is some
values needed to store to the state (like USB message sequence numbers).
For example AF9015/AF9035/IT9135/IT9137... fortunately those still works
currently since firmware never checks sequence counter validly.
attach all given adapter frontends as once
-------------------
* for the MFE devices attach all frontends as once
We should first clean-up the bad/legacy MFE drivers, as most use MFE to
implement a single FE chipset that supports more than one delivery system.
I think there is only 3 DVB USB drivers using MFE - and all those
contains different physical demods. Those are anysee, mxl111sf and ttusb2.
* deregister all frontends if error returned
* small effect only for MFE
attach all given adapter tuners as once
-------------------
* deregister all frontends if error returned
* small effect only for MFE
make remote dynamically configurable
-------------------
The first step here is to remove rc.legacy stuff.
* default keytable mapped same level with USB-ID& device name etc.
* there is generally 3 things that could be mapped to USB ID
- USB IDs (cold + warm)
- device name
- remote controller keytable
- all the others could be resolved& configured dynamically
* it is not only keytable but whole remote should be changed dynamically
configurable
The issue with IR is because of the issue with struct dvb_usb_device_properties.
If you take a look at em28xx implementation, for example, there's just one
parameter for the IR keytables that determine if a device will be loaded with
or without IR: the RC keytable.
re-designing dvb_usb_device_properties should fix it.
make stream dynamically configurable
-------------------
* we need change stream parameters in certain situations
- there is multiple endpoints but shared MFE
- need to set params according to stream bandwidth (USB1.1, DVB-T, DVB-C2 in
same device)
- leave old static configrations as those are but add callbacks to get new
values at runtime
dynamically growing device list in dvb_usb_device_properties
-------------------
* currently number of devices are limited statically
* there is devices having ~50 or more IDs which means multiple
dvb_usb_device_properties are needed
dynamic USB ID support
-------------------
* currently not supported by DVB USB
analog support for the DVB USB
-------------------
* currently not supported by DVB USB
In order to add analog support, it is likely simpler to take em28xx (mainly
em28xx-video) as an
example on how things are implemented on analog side. The gspca implementation
may also help a
lot, but it doesn't contain the tuner bits.
It would be great to have an "usb_media" core implementation that would merge
gspca_core,
dvb_usb and USB TV bits (found on em28xx/tm6000) into a single core, but if
we're taking
this road, then I think you should start with this new design.
The conceptual architecture used by gspca, em28xx and dvb_core are different.
Merging them
into a single architectural design will be a really nice project, but that
would probably
mean to write a new design from scratch, and then importing bits from each of
the above.
This is likely a big project.
Big and I do not have experience other than from the DVB devices.
* I have no experience
The easiest way to start working with analog is to take a look at vivi.c
driver. It is just a
test driver that requires no hardware, and implements the basic stuff for
analog. It doesn't
implement the tuner logic, though.
* em28xx can be converted?
If you implement the analog code, it shouldn't be hard to convert em28xx. The
hardest part
will likely to integrate DVB USB with videobuf2 and with tuner-core.
Regards,
Mauro
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html