Dear all,
I am trying to get a mt9p031 sensor running on a beagleboard-xm with the
following configuration:
Hardware:
- beagleboard-xm, rev c1
- Leopard Imaging cam module LI-5M03 with a mt9p031 5MP sensor
Software:
- Angstrom-distro built with bitbake using the setup-scripts from [4] (commit
da56a56b690bcc07a50716f1071e90e2b3a4fb47).
- own bitbake recipe to build a linux-omap kernel 3.5-rc1 from the tmdlind
branch (this source: [5], tag omap-fixes-for-v3.5-rc1)
- some patches to update the 3.5-rc1 omap3-isp module (not the whole kernel) to
the latest omap3isp-sensors-next branch from Laurent Pinchart [1]
- yavta with an extension to output data to stdout
- mediactl to configure the omap3isp pipeline
Problem:
I configure a pipe with mediactl from OMAP3 ISP CCDC input to the previewer
output (see [3] for a detailed log) with an example resolution of 800x600. This
resolution is adapted by the omap3isp driver to 846x639 at the previewer
output. In my understanding the adjustment of the resolution (from 800x600 to
846x639) is a result of the following process:
1) The closest possible windowing of the mt9p031 sensor is 864x648.
2) The ccdc-source pad crops the height by one line (see function
ccdc_try_format in ispccdc.c) - we are now on 864x647
3) The previewer (isppreview.c) crops a left margin of 8px and a right margin
of 6px (see the PREV_MARGIN_* defines) plus 4px if the input is from ccdc (see
preview_try_crop) - we are now on 846x639.
As there are no filters activated, the input size will not be modified by the
preview_config_input_size function.
When I now capture a frame with yavta (see [3] for details), I must use 846x639
as frame size (as this size is reported by the driver). But it seems that the
outputted image is 2px wider (that means 848x639). This results in a
"scrambled"/unusable image on screen when streaming (see [6]
bad-frame-846x639_on_display.bmp for an example how it looks like on screen).
Also the file size too big for a 846x639 image:
The frame size is 1083744 bytes, which is exactly 848*639*2 (NOT 846*639*2)!
Then I transformed the "bad" yuv-picture with raw2rgbpnm which gives me a good
picture with both frame-sizes (see bad-frame-846x639.pnm and
bad-frame-848x639_on_display.bmp in [6]).
So the picture-information seems to be good, but I guess that the input-size is
configured badly by the driver.
If you look in the isp-datasheet [7] in table 6-40 (page 1201) you see, that
the CFA interpolation block for bayer-mode crops 4 px per line and 4 lines.
So shouldn't we respect this in the preview_config_input_size function?
My RFC is:
Index: git/drivers/media/video/omap3isp/isppreview.c
===================================================================
--- git.orig/drivers/media/video/omap3isp/isppreview.c 2012-07-05
10:59:33.675358396 +0200
+++ git/drivers/media/video/omap3isp/isppreview.c 2012-07-05
12:14:33.723223514 +0200
@@ -1140,6 +1140,12 @@
}
if (features & (OMAP3ISP_PREV_CHROMA_SUPP | OMAP3ISP_PREV_LUMAENH))
sph -= 2;
+ if (features & OMAP3ISP_PREV_CFA) {
+ sph -= 2;
+ eph += 2;
+ slv -= 2;
+ elv += 2;
+ }
isp_reg_writel(isp, (sph << ISPPRV_HORZ_INFO_SPH_SHIFT) | eph,
OMAP3_ISP_IOMEM_PREV, ISPPRV_HORZ_INFO);
===================================================================
NOTE: This still gives an unusable picture at the previewer output BUT if I
extend the pipeline to the resizer output, the picture is good. So I must be
missing something...
It would be nice, if someone could tell me, if my assumptions are right and
point me the right direction.
Further information:
- Bootup dmesg: [2]
- Configuration of the pipe with mediactl, capturing of an image with yavta and
analyze of the image with raw2rgbpnm: [3]
[1]
http://git.linuxtv.org/pinchartl/media.git/commit/019214973ee4f03c8f2d582468b914fcf3385089
[2] http://pastebin.com/7PQnzcmx
[3] http://pastebin.com/ChEaYHMy
[4] https://github.com/Angstrom-distribution/setup-scripts
[5] git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
[6] https://www.dropbox.com/sh/p2fy5u4i71c3vy8/Fyya25YqK-
[7] http://www.ti.com/lit/ug/sprugn4q/sprugn4q.pdf
Greetings,
Florian Neuhaus
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html