Hi David,

> Just to make sure something like that isn't happening, could you
> correct the line in wbcir_irq_rx() which currently reads:
> 
> rawir.duration = US_TO_NS((irdata & 0x7F) * 10);
> 
> so that it reads
> 
> rawir.duration = US_TO_NS(((irdata & 0x7F) + 1) * 10);

Sure, I have added the change. This is what my diff to mainline looks
like right now:

diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c
index 342c2c8..6381c11 100644
--- a/drivers/media/rc/winbond-cir.c
+++ b/drivers/media/rc/winbond-cir.c
@@ -232,7 +232,7 @@ MODULE_PARM_DESC(invert, "Invert the signal from the IR 
receiver");
 
 static bool txandrx; /* default = 0 */
 module_param(txandrx, bool, 0444);
-MODULE_PARM_DESC(invert, "Allow simultaneous TX and RX");
+MODULE_PARM_DESC(txandrx, "Allow simultaneous TX and RX");
 
 static unsigned int wake_sc = 0x800F040C;
 module_param(wake_sc, uint, 0644);
@@ -358,7 +358,8 @@ wbcir_irq_rx(struct wbcir_data *data, struct pnp_dev 
*device)
                if (data->rxstate == WBCIR_RXSTATE_ERROR)
                        continue;
                rawir.pulse = irdata & 0x80 ? false : true;
-               rawir.duration = US_TO_NS((irdata & 0x7F) * 10);
+               rawir.duration = US_TO_NS(((irdata & 0x7F) + 1) * 10);
+               printk(KERN_DEBUG "%x %d %d\n", irdata, rawir.pulse, 
rawir.duration);
                ir_raw_event_store_with_filter(data->dev, &rawir);
        }
 
@@ -1026,6 +1027,7 @@ wbcir_probe(struct pnp_dev *device, const struct 
pnp_device_id *dev_id)
        data->dev->input_id.product = WBCIR_ID_FAMILY;
        data->dev->input_id.version = WBCIR_ID_CHIP;
        data->dev->map_name = RC_MAP_RC6_MCE;
+       data->dev->timeout = MS_TO_NS(100);
        data->dev->s_idle = wbcir_idle_rx;
        data->dev->s_tx_mask = wbcir_txmask;
        data->dev->s_tx_carrier = wbcir_txcarrier;

Here is the debug output:

http://ozlabs.org/~anton/winbond.log1.gz

> Another possibility is that the printk in the interrupt handler causes
> overhead...could you do a debug run without the printk in the
> interrupt handler?

Here is the output without the printk in the interrupt handler:

http://ozlabs.org/~anton/winbond.log2.gz

Anton
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to