On Fri, 25 May 2012, Sylwester Nawrocki wrote:
> Signed-off-by: Sylwester Nawrocki <s.nawro...@samsung.com>
> Signed-off-by: Karol Lewandowski <k.lewando...@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
>From the documentation below I think, I understand what it does, but why
is it needed? It doesn't describe your video subsystem topology, right?
How various subdevices are connected. It just lists them all in one
node... A description for this patch would be very welcome IMHO and,
maybe, such a node can be completely avoided?
Thanks
Guennadi
> ---
> .../bindings/camera/soc/samsung-fimc.txt | 66 ++++
> drivers/media/video/s5p-fimc/fimc-capture.c | 2 +-
> drivers/media/video/s5p-fimc/fimc-core.c | 410
> +++++++++++---------
> drivers/media/video/s5p-fimc/fimc-core.h | 2 -
> drivers/media/video/s5p-fimc/fimc-mdevice.c | 8 +-
> 5 files changed, 291 insertions(+), 197 deletions(-)
> create mode 100644
> Documentation/devicetree/bindings/camera/soc/samsung-fimc.txt
>
> diff --git a/Documentation/devicetree/bindings/camera/soc/samsung-fimc.txt
> b/Documentation/devicetree/bindings/camera/soc/samsung-fimc.txt
> new file mode 100644
> index 0000000..1ec48e9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/camera/soc/samsung-fimc.txt
> @@ -0,0 +1,66 @@
> +Samsung S5P/EXYNOS SoC Camera Subsystem (FIMC)
> +----------------------------------------------
> +
> +The Exynos Camera subsystem uses a dedicated device node associated with
> +top level device driver that manages common properties of the whole
> subsystem,
> +like common camera port pins or clocks for external image sensors. This
> +aggregate node references related platform sub-devices - FIMC, FIMC-LITE,
> +MIPI-CSIS [1], and it also contains nodes describing image sensors wired to
> +the host SoC's video port and using I2C or SPI as the control bus.
> +
> +
> +Common 'camera' node
> +--------------------
> +
> +Required properties:
> +
> +- compatible : must be "samsung,fimc"
> +- fimc-controllers : an array of phandles to 'fimc' device nodes,
> + size of this array must be at least 1;
> +
> +Optional properties:
> +
> +- csi-rx-controllers : an array of phandles to 'csis' device nodes,
> + it is required for sensors with MIPI-CSI2 bus;
> +
> +'fimc' device node
> +------------------
> +
> +Required properties:
> +
> +- compatible : should be one of:
> + "samsung,s5pv210-fimc"
> + "samsung,exynos4210-fimc";
> + "samsung,exynos4412-fimc";
> +- reg : physical base address and size of the device memory
> mapped
> + registers;
> +- interrupts : FIMC interrupt to the CPU should be described here;
> +- cell-index : FIMC IP instance index, the number of available instances
> + depends on the SoC revision. For S5PV210 valid values are:
> + 0...2, for Exynos4x1x: 0...3.
> +
> +Example:
> +
> + fimc0: fimc@11800000 {
> + compatible = "samsung,exynos4210-fimc";
> + reg = <0x11800000 0x1000>;
> + interrupts = <0 85 0>;
> + cell-index = <0>;
> + };
> +
> + csis0: csis@11880000 {
> + compatible = "samsung,exynos4210-csis";
> + reg = <0x11880000 0x1000>;
> + interrupts = <0 78 0>;
> + cell-index = <0>;
> + };
> +
> + camera {
> + compatible = "samsung,fimc";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + fimc-controllers = <&fimc0>;
> + csi-rx-controllers = <&csis0>;
> + };
> +
> +[1] Documentation/devicetree/bindings/video/samsung-mipi-csis.txt
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
