On Thu 19 July 2012 15:41:07 Hans Verkuil wrote:
> Hi Soby!
>
> On Thu 19 July 2012 14:18:13 Soby Mathew wrote:
> > Hi everyone,
> > Currently there is limitation in v4l2 for specifying the 3D
> > formats . In HDMI 1.4 standard, the following 3D formats are
> > specified:
>
> I think that this is ideal for adding to enum v4l2_field.
> I've made some proposals below:
>
> >
> > 1. FRAME_PACK,
>
> V4L2_FIELD_3D_FRAME_PACK (progressive)
> V4L2_FIELD_3D_FRAME_PACK_TB (interlaced, odd == top comes first)
BTW, I'm not really sure at the moment how to handle the 'active space'.
I guess the application will have to use the DV_TIMINGS ioctls to discover
the vertical blanking size and use that to interpret the captured data.
We would also have to add new 3D timings to linux/v4l2-dv-timings.h.
Regards,
Hans
>
> > 2. FIELD_ALTERNATIVE,
>
> V4L2_FIELD_3D_FIELD_ALTERNATIVE
>
> > 3. LINE_ALTERNATIVE,
>
> V4L2_FIELD_3D_LINE_ALTERNATIVE
>
> > 4. SIDE BY SIDE FULL,
>
> V4L2_FIELD_3D_SBS_FULL
>
> > 5. SIDE BY SIDE HALF,
>
> V4L2_FIELD_3D_SBS_HALF
>
> > 6. LEFT + DEPTH,
>
> V4L2_FIELD_3D_L_DEPTH
>
> > 7. LEFT + DEPTH + GRAPHICS + GRAPHICS-DEPTH,
>
> V4L2_FIELD_3D_L_DEPTH_GFX_DEPTH
>
> > 8. TOP AND BOTTOM
>
> V4L2_FIELD_3D_TAB
>
> You would also need defines that describe which field is received for the
> field
> alternative mode (it's put in struct v4l2_buffer):
>
> V4L2_FIELD_3D_LEFT_TOP
> V4L2_FIELD_3D_LEFT_BOTTOM
> V4L2_FIELD_3D_RIGHT_TOP
> V4L2_FIELD_3D_RIGHT_BOTTOM
>
> >
> >
> > In addition for some of the formats like Side-by-side-half there are
> > some additional metadata (like type of horizontal sub-sampling)
>
> A control seems to be the most appropriate method of exposing the
> horizontal subsampling.
>
> > and
> > parallax information which may be required for programming the display
> > processing pipeline properly.
>
> This would be a new ioctl, but I think this should only be implemented if
> someone can actually test it with real hardware. The same is true for the
> more exotic 3D formats above.
>
> It seems SBS is by far the most common format.
>
> >
> > I am not very sure on how to expose this to the userspace. This is an
> > inherent property of video signal , hence it would be appropriate to
> > have an additional field in v4l_format to specify 3D format. Currently
> > this is a requirement for HDMI 1.4 Rx / Tx but in the future it would
> > be applicable to broadcast sources also.
> >
> > In our implementation we have temporarily defined a Private Control to
> > expose this .
> >
> > Please let me know of your suggestions .
>
> I hope this helps!
>
> Regards,
>
> Hans
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html