Opps, the previous email has a HTML part, so resending.
Hi Sylwester Thank for the review. On 19 July 2012 20:40, Sylwester Nawrocki <sylvester.nawro...@gmail.com> wrote: > > Hi Sangwook, > > On 07/19/2012 02:14 PM, Sangwook Lee wrote: > > Add factory default settings for S5K4ECGX sensor registers. > > I copied them from the reference code of Samsung S.LSI. > > I'm pretty sure we can do better than that. I've started S5K6AAFX sensor > driver development with similar set of write-only register address/value > arrays, that stored mainly register default values after the device reset, > or were configuring presets that were never used. > > If you lok at the s5k6aa driver, you'll find only one relatively small > array of register values for the analog processing block settings. > It's true that I had to reverse engineer a couple of things, but I also > > had a relatively good datasheet for the sensor. > Yes, I already saw analog settings in s5k6aa. Compared to s5k6aa, I couldn't also understand why the sensor has lots of initial values. Is it because s5k4ecgx is slightly more complicated than s5k6aa ? > > According to comments from the reference code, they do not > > recommend any changes of these settings. > > Yes, but it doesn't mean cannot convert, at least part of, those ugly > tables into function calls. Yes, the biggest table seems to be one time for boot-up, at least I need to remove one more macro (token) > > Have you tried to contact Samsung S.LSI for a datasheet that would > contain better registers' description ? As you might know, there is a limitation for me to get those information. :-) Instead, if I look into the source code of Google Nexus S which uses s5k4ecgx, https://android.googlesource.com/kernel/samsung.git I can discover that both Google and Samsung are using the same huge table just for initial settings from the sensor booting-up. I added the original author of this sensor driver. Hopes he might add some comments :-) Thanks Sangwook > > -- > > Thanks, > Sylwester -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html