Hi,
On 09/10/2012 05:04 PM, Sylwester Nawrocki wrote:
> Hi,
>
> On 09/09/2012 06:01 PM, Francesco Lavra wrote:
>>> +static int s5k4ecgx_load_firmware(struct v4l2_subdev *sd)
>>> +{
>>> + const struct firmware *fw;
>>> + int err, i, regs_num;
>>> + struct i2c_client *client = v4l2_get_subdevdata(sd);
>>> + u16 val;
>>> + u32 addr, crc, crc_file, addr_inc = 0;
>>> +
>>> + err = request_firmware(&fw, S5K4ECGX_FIRMWARE, sd->v4l2_dev->dev);
>>> + if (err) {
>>> + v4l2_err(sd, "Failed to read firmware %s\n", S5K4ECGX_FIRMWARE);
>>> + return err;
>>> + }
>>> + regs_num = *(u32 *)(fw->data);
>>> + v4l2_dbg(3, debug, sd, "FW: %s size %d register sets %d\n",
>>> + S5K4ECGX_FIRMWARE, fw->size, regs_num);
>>> + regs_num++; /* Add header */
>>> + if (fw->size != regs_num * FW_RECORD_SIZE + FW_CRC_SIZE) {
>>> + err = -EINVAL;
>>> + goto fw_out;
>>> + }
>>> + crc_file = *(u32 *)(fw->data + regs_num * FW_RECORD_SIZE);
>>
>> Depending on the value of regs_num, this may result in unaligned access
>
> Thanks for the catch. I think it is not the only place where unaligned
> issues are possible. Since the data records are 4-byte address + 2-byte
> value there is also an issue with reading the address entries. Assuming
> fw->data is aligned to at least 2-bytes (not quite sure if we can assume
> that) there should be no problem with reading 2-byte register values.
I'm not sure 2-byte alignment can be safely assumed, either.
> We could change the data types of the register values from u16 to u32,
> wasting some memory (there is approximately 3 000 records), so there is
> no other data types in the file structure than u32. Or use a patch as
> below. Not sure what's better.
I prefer the approach of your patch below, but I would use get_unaligned
to get the 2-byte values, too. Also there are another couple of
glitches, see below.
>
> 8<---------------------------------------------------------------------
> From a970480b99bdb74e2bf48e1a321724231e6516a0 Mon Sep 17 00:00:00 2001
> From: Sylwester Nawrocki <[email protected]>
> Date: Sun, 9 Sep 2012 19:56:31 +0200
> Subject: [PATCH] s5k4ecgx: Fix unaligned access issues
>
> Signed-off-by: Sylwester Nawrocki <[email protected]>
> ---
> drivers/media/i2c/s5k4ecgx.c | 16 ++++++++++++----
> 1 files changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/i2c/s5k4ecgx.c b/drivers/media/i2c/s5k4ecgx.c
> index 0ef0b7d..4c6439a 100644
> --- a/drivers/media/i2c/s5k4ecgx.c
> +++ b/drivers/media/i2c/s5k4ecgx.c
> @@ -24,6 +24,7 @@
> #include <linux/module.h>
> #include <linux/regulator/consumer.h>
> #include <linux/slab.h>
> +#include <asm/unaligned.h>
>
> #include <media/media-entity.h>
> #include <media/s5k4ecgx.h>
> @@ -331,6 +332,7 @@ static int s5k4ecgx_load_firmware(struct v4l2_subdev *sd)
> const struct firmware *fw;
> int err, i, regs_num;
> u32 addr, crc, crc_file, addr_inc = 0;
> + const u8 *ptr;
> u16 val;
>
> err = request_firmware(&fw, S5K4ECGX_FIRMWARE, sd->v4l2_dev->dev);
> @@ -338,7 +340,7 @@ static int s5k4ecgx_load_firmware(struct v4l2_subdev *sd)
> v4l2_err(sd, "Failed to read firmware %s\n", S5K4ECGX_FIRMWARE);
> return err;
> }
> - regs_num = le32_to_cpu(*(u32 *)fw->data);
> + regs_num = le32_to_cpu(get_unaligned((__le32 *)fw->data));
>
> v4l2_dbg(3, debug, sd, "FW: %s size %d register sets %d\n",
> S5K4ECGX_FIRMWARE, fw->size, regs_num);
> @@ -349,7 +351,8 @@ static int s5k4ecgx_load_firmware(struct v4l2_subdev *sd)
> goto fw_out;
> }
>
> - crc_file = *(u32 *)(fw->data + regs_num * FW_RECORD_SIZE);
> + memcpy(&crc_file, fw->data + regs_num * FW_RECORD_SIZE, sizeof(u32));
crc_file should be converted from little endian to native endian.
> +
> crc = crc32_le(~0, fw->data, regs_num * FW_RECORD_SIZE);
> if (crc != crc_file) {
> v4l2_err(sd, "FW: invalid crc (%#x:%#x)\n", crc, crc_file);
> @@ -357,9 +360,14 @@ static int s5k4ecgx_load_firmware(struct v4l2_subdev *sd)
> goto fw_out;
> }
>
> + ptr = fw->data + FW_RECORD_SIZE;
> +
> for (i = 1; i < regs_num; i++) {
> - addr = le32_to_cpu(*(u32 *)(fw->data + i * FW_RECORD_SIZE));
> - val = le16_to_cpu(*(u16 *)(fw->data + i * FW_RECORD_SIZE + 4));
> + addr = le32_to_cpu(get_unaligned((__le32 *)ptr));
> + ptr += 4;
> + val = le16_to_cpu(*(__le16 *)ptr);
> + ptr += FW_RECORD_SIZE;
ptr is being incremented by (4 + FW_RECORD_SIZE) bytes at each iteration.
> +
> if (addr - addr_inc != 2)
> err = s5k4ecgx_write(client, addr, val);
> else
--
Francesco
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html