On Sun, 23 Sep 2012, Frank Schäfer wrote:
> Am 23.09.2012 23:21, schrieb Guennadi Liakhovetski:
> > Hi Frank
> >
> > On Sun, 23 Sep 2012, Frank Schäfer wrote:
> >
> >> We currently don't select the register bank in ov2640_s_ctrl, so we can
> >> end up
> >> writing to DSP register 0x04 instead of sensor register 0x04.
> >> This happens for example when calling ov2640_s_ctrl after ov2640_s_fmt.
> > Yes, in principle, I agree, bank switching in the driver is not very...
> > consistent and also this specific case looks buggy. But, we have to fix
> > your fix.
> >
> >> Signed-off-by: Frank Schäfer <[email protected]>
> >> Cc: [email protected]
> >> ---
> >> drivers/media/i2c/soc_camera/ov2640.c | 8 ++++++++
> >> 1 Datei geändert, 8 Zeilen hinzugefügt(+)
> >>
> >> diff --git a/drivers/media/i2c/soc_camera/ov2640.c
> >> b/drivers/media/i2c/soc_camera/ov2640.c
> >> index 78ac574..e4fc79e 100644
> >> --- a/drivers/media/i2c/soc_camera/ov2640.c
> >> +++ b/drivers/media/i2c/soc_camera/ov2640.c
> >> @@ -683,8 +683,16 @@ static int ov2640_s_ctrl(struct v4l2_ctrl *ctrl)
> >> struct v4l2_subdev *sd =
> >> &container_of(ctrl->handler, struct ov2640_priv, hdl)->subdev;
> >> struct i2c_client *client = v4l2_get_subdevdata(sd);
> >> + struct regval_list regval;
> >> + int ret;
> >> u8 val;
> >>
> >> + regval.reg_num = BANK_SEL;
> >> + regval.value = BANK_SEL_SENS;
> >> + ret = ov2640_write_array(client, ®val);
> > This doesn't look right to me. ov2640_write_array() keeps writing register
> > address - value pairs to the hardware until it encounters an "ENDMARKER,"
> > which you don't have here, so, it's hard to say what will be written to
> > the sensor... Secondly, you only have to write a single register here, for
> > this the driver is already using i2c_smbus_write_byte_data() directly,
> > please, do the same.
>
> Argh, yes, you're right.
> The mistake was to split this off from patch 3 to reduce changes for
> stable...
> I will combine both patches and resend the series.
No, please, don't. Just use i2c_smbus_write_byte_data() at this one
location for the fix patch.
Thanks
Guennadi
>
> Regards,
> Frank
>
> >
> > Thanks
> > Guennadi
> >
> >> + if (ret < 0)
> >> + return ret;
> >> +
> >> switch (ctrl->id) {
> >> case V4L2_CID_VFLIP:
> >> val = ctrl->val ? REG04_VFLIP_IMG : 0x00;
> >> --
> >> 1.7.10.4
> >>
> > ---
> > Guennadi Liakhovetski, Ph.D.
> > Freelance Open-Source Software Developer
> > http://www.open-technology.de/
>
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html