On Fri October 5 2012 12:58:21 Guennadi Liakhovetski wrote:
> On Fri, 5 Oct 2012, Hans Verkuil wrote:
>
> > On Tue October 2 2012 12:13:20 Sylwester Nawrocki wrote:
> > > Hi Guennadi,
> > >
> > > On 10/02/2012 11:49 AM, Guennadi Liakhovetski wrote:
> > > >>> + if (!of_property_read_u32_array(node, "data-lanes", data_lanes,
> > > >>> + ARRAY_SIZE(data_lanes))) {
> > > >>> + int i;
> > > >>> + for (i = 0; i< ARRAY_SIZE(data_lanes); i++)
> > > >>> + link->mipi_csi_2.data_lanes[i] = data_lanes[i];
> > > >>
> > > >> It doesn't look like what we aimed for. The data-lanes array is
> > > >> supposed
> > > >> to be of variable length, thus I don't think it can be parsed like
> > > >> that.
> > > >> Or am I missing something ? I think we need more something like below
> > > >> (based on of_property_read_u32_array(), not tested):
> > > >
> > > > Ok, you're right, that my version only was suitable for fixed-size
> > > > arrays,
> > > > which wasn't our goal. But I don't think we should go down to manually
> > > > parsing property data. How about (tested;-))
> > > >
> > > > data = of_find_property(node, "data-lanes", NULL);
> > > > if (data) {
> > > > int i = 0;
> > > > const __be32 *lane = NULL;
> > > > do {
> > > > lane = of_prop_next_u32(data, lane,
> > > > &data_lanes[i]);
> > > > } while (lane && i++ < ARRAY_SIZE(data_lanes));
> > > > link->mipi_csi_2.num_data_lanes = i;
> > > > while (i--)
> > > > link->mipi_csi_2.data_lanes[i] = data_lanes[i];
> > > > }
> > >
> > > Yes, that looks neat and does what it is supposed to do. :) Thanks!
> > > For now, I'll trust you it works ;)
> > >
> > > With regards to the remaining patches, it looks a bit scary to me how
> > > complicated it got, perhaps mostly because of requirement to reference
> > > host devices from subdevs. And it seems to rely on the existing SoC
> > > camera infrastructure, which might imply lot's of work need to be done
> > > for non soc-camera drivers. But I'm going to take a closer look and
> > > comment more on the details at the corresponding patches.
> >
> > I have to say that I agree with Sylwester here. It seems awfully
> > complicated,
> > but I can't really put my finger on the actual cause.
>
> Well, which exactly part? The V4L2 OF part is quite simple.
No, the soc_camera part. The V4L2 OF part looks OK. Sorry, I should have
mentioned that!
> > It would be really
> > interesting to see this implemented for a non-SoC device and to compare the
> > two.
>
> Sure, volunteers? ;-) In principle, if I find time, I could try to convert
> sh_vou, which is also interesting, because it's an output driver.
>
> > One area that I do not yet completely understand is the i2c bus
> > notifications
> > (or asynchronous loading or i2c modules).
> >
> > I would have expected that using OF the i2c devices are still initialized
> > before the host/bridge driver is initialized. But I gather that's not the
> > case?
>
> No, it's not. I'm not sure, whether it depends on the order of devices in
> the .dts, but, I think, it's better to not have to mandate a certain order
> and I also seem to have seen devices being registered in different order
> with the same DT, but I'm not 100% sure about that.
>
> > If this deferred probing is a general problem, then I think we need a
> > general
> > solution as well that's part of the v4l2 core.
>
> That can be done, perhaps. But we can do it as a next step. As soon as
> we're happy with the OF implementation as such, we can commit that,
> possibly leaving soc-camera patches out for now, then we can think where
> to put async I2C handling.
It would be good to have a number of 'Reviewed-by's or 'Acked-by's for the
DT binding documentation at least before it is merged.
I think the soc_camera patches should be left out for now. I suspect that
by adding core support for async i2c handling first, the soc_camera patches
will become a lot easier to understand.
Regards,
Hans
>
> Thanks
> Guennadi
> ---
> Guennadi Liakhovetski, Ph.D.
> Freelance Open-Source Software Developer
> http://www.open-technology.de/
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html