Hi,
On 10/05/2012 11:53 PM, Fabio Estevam wrote:
During the clock conversion for mx27 the "per4_gate" clock was missed to get
registered as a dependency of mx2-camera driver.

In the old mx27 clock driver we used to have:

DEFINE_CLOCK1(csi_clk, 0, NULL, 0, parent, &csi_clk1, &per4_clk);

,so does the same in the new clock driver.

Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
  arch/arm/mach-imx/clk-imx27.c |    1 +
  1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 3b6b640..5ef0f08 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -224,6 +224,7 @@ int __init mx27_clocks_init(unsigned long fref)
        clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
        clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0");
        clk_register_clkdev(clk[csi_ahb_gate], "ahb", "mx2-camera.0");
+       clk_register_clkdev(clk[per4_gate], "per", "mx2-camera.0");
        clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
        clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
        clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");

I only test detection at kernel boot not streaming using Gstreamer due to lack of time.

On imx27_3ds board with ov2640 sensor:
ov2640 0-0030: ov2640 Product ID 26:42 Manufacturer ID 7f:a2
mx2-camera mx2-camera.0: MX2 Camera (CSI) driver probed, clock frequency: 44333333

On clone imx27_3ds board with mt9v111 sensor (draft driver):
mt9v111 0-0048: Detected a MT9V111 chip ID 823a
mx2-camera mx2-camera.0: MX2 Camera (CSI) driver probed, clock frequency: 44333333

Tested-by: Gaëtan Carlier <gcem...@gmail.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to