Hi, Sakari.
On 10/15/2012 12:59 PM, Sakari Ailus wrote:
Hi Chris,
On Mon, Oct 15, 2012 at 11:53:56AM -0700, Chris MacGregor wrote:
On 10/15/2012 11:45 AM, Laurent Pinchart wrote:
Hi Sakari,
On Monday 15 October 2012 19:05:49 Sakari Ailus wrote:
Hi all,
As a summar from the discussion, I think we have reached the following
conclusion. Please say if you agree or disagree with what's below. :-)
- The drivers will be moved to use monotonic timestamps for video buffers.
- The user space will learn about the type of the timestamp through buffer
flags.
- The timestamp source may be made selectable in the future, but buffer
flags won't be the means for this, primarily since they're not available on
subdevs. Possible way to do this include a new V4L2 control or a new IOCTL.
That's my understanding as well. For the concept,
Acked-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
I wasn't able to participate in the discussion that led to this, but
I'd like to suggest and request now that an explicit requirement (of
whatever scheme is selected) be that a userspace app have a
reasonable and straightforward way to translate the timestamps to
real wall-clock time, ideally with enough precision to allow
synchronization of cameras across multiple computers.
In the systems I work on, for instance, we are recording real-world
biological processes, some of which vary based on the time of day,
and it is important to know when a given frame was captured so that
information can be stored with the raw frame and the data derived
from it. For many such purposes, an accuracy measured in multiple
seconds (or even minutes) is fine.
However, when we are using multiple cameras on multiple computers
(e.g., two or more BeagleBoard xM's, each with a camera connected),
we would want to synchronize with an accuracy of less than 1 frame
time - e.g. 10 ms or less.
I think you have two use cases actually: knowing when an image has been
taken, and synchronisation of images from multiple sources. The first one is
easy: you just call clock_gettime() for the realtime clock. The precision
will certainly be enough.
I assume you mean that I would, for instance:
clock_gettime(CLOCK_REALTIME, &realtime);
clock_gettime(CLOCK_MONOTONIC, &monotime);
(compute realtime-monotime and save the result)
...
(later add that result to the timestamp on a frame to recover the
approximate real-world capture time)
Agreed, for this purpose - getting a reasonable real-world timestamp on
the frame - the precision is fine...worst case, my process gets
rescheduled between the two clock_gettime() calls, but even that won't
matter for this purpose.
For the latter the realtime clock fits poorly to begin with: it jumps around
e.g. when the daylight saving time changes.
I think what I'd do is this: figure out the difference between the monotonic
clocks of your systems and use that as basis for synchronisation. I wonder
if there are existing solutions for this based e.g. on the NTP.
The pace of the monotonic clocks on different systems is the same as the
real-time ones; the same NTP adjustments are done to the monotonic clock as
well. As an added bonus you also won't be affected by daylight saving time
or someone setting the clock manually.
Yes, I believe that this could work. My concern is that there is some
unpredictability in the timing of the two clock_gettime() calls, and
thus some inaccuracy in the conversion, and while I could likely get the
two systems sufficiently sync'd using NTP or the like at the real-world
level, the conversion from that (on each system) to the system's
monotonic time would contain an unpredictable (though bounded)
inaccuracy. I suppose that as long as I sync the cameras at the hardware
level (e.g. by tying the strobe line of one to the trigger lines of the
rest, or tying all the trigger lines to a GPIO), the inaccuracy would be
less than a frame time, and so I could know reliably enough which frames
go together.
However, it seems much cleaner to have a more direct way to convert the
monotonic time to real-world time, or to get real-world time on the
frames in the first place (for applications that want that). I don't
know of a way to do the former.
The conversion of the two clocks requires the knowledge of the values of
kernel internal variables, so performing the conversion in user space later
on is not an option.
Sorry, you lost me on this one, unless you're talking about what I refer
to in my paragraph just above - converting the monotonic timestamp on
the frame to real-world time...?
Alternatively you could just call clock_gettime() after every DQBUF call,
but that's indeed less precise than if the driver would get the timestamp
for you.
And also less efficient. The platforms I'm working on are already
hard-pressed to keep up with all the pixels I'm trying to capture and
process, so I don't really want to waste time trapping into kernel mode
again if I can avoid it.
How would this work for you?
Better than nothing, and probably I could live with it. But I think
perhaps we can do better than that, and now seems like the right time to
figure it out.
Best regards,
Cheers,
Chris MacGregor (the Seattle one)
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html