Hi there,
This is my first post on this list; I hope I'm on the right place to discuss
this problem. If
not, feel free to tell me where I should post.
I bought this DVB-T dual tuner card, in order to put it in my HTPC (running
geeXboX/XBMC).
As far as I know, there where only support (patches) for kernel 2.6.x; I didn't
find anything
for 3.x branch. So I tried to port the patches. And I think I got something...
Well, maybe!
I followed the links on this wiki page:
http://linuxtv.org/wiki/index.php/TerraTec_Cinergy_2400i_DVB-T
It seems that the PCIe bridge used on this card needs a firmware in order to
work; this is what
the patch does. I used this files:
http://wiki.ubuntuusers.de/_attachment?target=/Terratec_Cinergy_2400i_DT/ngene_p11.tar.gz
As my desktop PC runs under debian sid, I only have a 3.2 kernel, so this is
the version I
patched to test the driver.
I can provide all files needed, but I just want to know if the following
messages sounds good
or if there are still problems...
During boot, I get:
nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas
ngene 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ngene: Found Terratec Integra/Cinergy2400i Dual DVB-T
ngene 0000:03:00.0: setting latency timer to 64
ngene: Device version 1
ngene: Loading firmware file ngene_17.fw.
cxd2099_attach: driver disabled by Kconfig
DVB: registering new adapter (nGene)
DVB: registering adapter 0 frontend 0 (Micronas DRXD DVB-T)...
DVB: registering new adapter (nGene)
DVB: registering adapter 1 frontend 0 (Micronas DRXD DVB-T)...
Then, when I launch w_scan, I get this from kernel:
drxd: deviceId = 0000
DRX3975D-A2
read deviation -520
drxd: deviceId = 0000
DRX3975D-A2
read deviation -333
and this from w_scan (no antenna pluged):
$ w_scan -ft -cFR
w_scan version 20120605 (compiled for DVB API 5.4)
using settings for FRANCE
DVB aerial
DVB-T FR
scan type TERRESTRIAL, channellist 5
output format vdr-1.6
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> TERRESTRIAL "Micronas DRXD DVB-T": good
:-) ¹
/dev/dvb/adapter1/frontend0 -> TERRESTRIAL "Micronas DRXD DVB-T": good
:-) ¹
Using TERRESTRIAL frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.4
frontend 'Micronas DRXD DVB-T' supports
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
FREQ (47.12MHz ... 855.25MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Scanning 8MHz frequencies...
474000: (time: 00:00)
474166: (time: 00:03)
473834: (time: 00:05)
...
849834: (time: 09:57)
850332: (time: 09:59)
850498: (time: 10:02)
858000: (time: 10:04) skipped: (freq 858000000 unsupported by driver)
initial_tune:2265: Setting frontend failed QAM_AUTO f = 858000 kHz
I999B8C999D999T999G999Y999
858166: (time: 10:04) skipped: (freq 858166000 unsupported by driver)
initial_tune:2265: Setting frontend failed QAM_AUTO f = 858166 kHz
I999B8C999D999T999G999Y999
857834: (time: 10:04) skipped: (freq 857834000 unsupported by driver)
initial_tune:2265: Setting frontend failed QAM_AUTO f = 857834 kHz
I999B8C999D999T999G999Y999
858332: (time: 10:04) skipped: (freq 858332000 unsupported by driver)
initial_tune:2265: Setting frontend failed QAM_AUTO f = 858332 kHz
I999B8C999D999T999G999Y999
858498: (time: 10:04) skipped: (freq 858498000 unsupported by driver)
initial_tune:2265: Setting frontend failed QAM_AUTO f = 858498 kHz
I999B8C999D999T999G999Y999
ERROR: Sorry - i couldn't get any working frequency/transponder
Nothing to scan!!
Reading all these logs, can you tell me if you see obvious problems? I'm
neither a kernel guru
(this is my first driver contact), nor a DVB-T user (so far!), so a lot of
things are not clear
to me.
Thanks for reading.
¹ first time w_scan is launched, these lines take 2-3 seconds, and I guess this
is when the
drxd kernel messages are output.
--
Frédéric
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
