On Tue, 11 Dec 2012 12:24:23 +0100, Sylwester Nawrocki <s.nawro...@samsung.com> wrote: > Hello Grant, > > On 12/11/2012 09:36 AM, Grant Likely wrote: > > On Mon, 10 Dec 2012 20:45:55 +0100, Sylwester Nawrocki > > <s.nawro...@samsung.com> wrote: > >> s5p-csis is platform device driver for MIPI-CSI frontend to the FIMC > >> (camera host interface DMA engine and image processor). This patch > >> adds support for instantiating the MIPI-CSIS devices from DT and > >> parsing all SoC and board specific properties from device tree. > >> > >> Signed-off-by: Sylwester Nawrocki <s.nawro...@samsung.com> > >> Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com> > >> --- > >> .../bindings/media/soc/samsung-mipi-csis.txt | 82 +++++++++++ > >> drivers/media/platform/s5p-fimc/mipi-csis.c | 155 > >> +++++++++++++++----- > >> drivers/media/platform/s5p-fimc/mipi-csis.h | 1 + > >> 3 files changed, 202 insertions(+), 36 deletions(-) > >> create mode 100644 > >> Documentation/devicetree/bindings/media/soc/samsung-mipi-csis.txt > >> > >> diff --git > >> a/Documentation/devicetree/bindings/media/soc/samsung-mipi-csis.txt > >> b/Documentation/devicetree/bindings/media/soc/samsung-mipi-csis.txt > >> new file mode 100644 > >> index 0000000..f57cbdc > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/media/soc/samsung-mipi-csis.txt > >> @@ -0,0 +1,82 @@ > >> +Samsung S5P/EXYNOS SoC MIPI-CSI2 receiver (MIPI CSIS) > >> +----------------------------------------------------- > >> + > >> +Required properties: > >> + > >> +- compatible : "samsung,s5pv210-csis" for S5PV210 SoCs, > >> + "samsung,exynos4210-csis" for Exynos4210 and later SoCs; > >> +- reg : physical base address and size of the device memory > >> mapped > >> + registers; > >> +- interrupts : should contain MIPI CSIS interrupt; the format of the > >> + interrupt specifier depends on the interrupt controller; > >> +- max-data-lanes : maximum number of data lanes supported (SoC specific); > >> +- vddio-supply : MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V); > >> +- vddcore-supply : MIPI CSIS Core voltage supply (e.g. 1.1V). > >> + > >> +Optional properties: > >> + > >> +- clock-frequency : The IP's main (system bus) clock frequency in Hz, > >> default > >> + value when this property is not specified is 166 MHz; > >> +- samsung,csis,wclk : CSI-2 wrapper clock selection. If this property is > >> present > >> + external clock from CMU will be used, if not bus clock will > >> + be selected. > >> + > >> +The device node should contain one 'port' child node with one child > >> 'endpoint' > >> +node, as outlined in the common media bindings specification. See > >> +Documentation/devicetree/bindings/media/v4l2.txt for details. The > >> following are > >> +properties specific to those nodes. (TODO: update the file path) > >> + > >> +port node > >> +--------- > >> + > >> +- reg : (required) must be 2 for camera C input (CSIS0) or > >> 3 for > >> + camera D input (CSIS1); > > > > 'reg' has a very specific definition. If you're going to use a reg > > property here, then the parent nodes need to have > > #address-cells=<1>;#size-cells=<0>; properties to define the address > > specifier format. > > > > However since you're identifying port numbers that aren't really > > addresses I would suggest simply changing this property to something > > like 'port-num'. > > > > Otherwise the binding looks good. > > Thank you for the review. Indeed I should have said about #address-cells, > #size-cells here. I thought using 'reg' was agreed during previous discussions > on the mailing lists (e.g. [1]), so I just carried on with 'reg'. > I should just have addressed the comments from Stephen and Rob, instead of > just resending same version of the documentation. I'll try to take care of > it in the next post. i.e. rename 'link' node to 'endpoint' and 'remote' > phandle to 'remote-endpoint'.
Could be. I can't remember what has been discussed from one day to the next. :-) If you've got #address/#size-cells in the binding, then reg is fine. If that's what you've already got, then just leave it. As long as the conventions are intact. g. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
