Am 15.12.2012 13:29, schrieb Mauro Carvalho Chehab:
> By disabling the NEC parity check, it is possible to handle all 3 NEC
> protocol variants (32, 24 or 16 bits).
>
> Change the driver in order to handle all of them.
>
> Unfortunately, em2860/em2863 provide only 16 bits for the IR scancode,
> even when NEC parity is disabled. So, this change should affect only
> em2874 and newer devices, with provides up to 32 bits for the scancode.
>
> Tested with one NEC-16, one NEC-24 and one RC5 IR.
>
> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
> ---
> drivers/media/usb/em28xx/em28xx-input.c | 58
> +++++++++++++++++++++------------
> drivers/media/usb/em28xx/em28xx-reg.h | 1 +
> 2 files changed, 39 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/media/usb/em28xx/em28xx-input.c
> b/drivers/media/usb/em28xx/em28xx-input.c
> index 660bf80..507370c 100644
> --- a/drivers/media/usb/em28xx/em28xx-input.c
> +++ b/drivers/media/usb/em28xx/em28xx-input.c
> @@ -57,8 +57,8 @@ MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
> struct em28xx_ir_poll_result {
> unsigned int toggle_bit:1;
> unsigned int read_count:7;
> - u8 rc_address;
> - u8 rc_data[4]; /* 1 byte on em2860/2880, 4 on em2874 */
> +
> + u32 scancode;
> };
>
> struct em28xx_IR {
> @@ -72,6 +72,7 @@ struct em28xx_IR {
> struct delayed_work work;
> unsigned int full_code:1;
> unsigned int last_readcount;
> + u64 rc_type;
>
> int (*get_key)(struct em28xx_IR *, struct em28xx_ir_poll_result *);
> };
> @@ -236,11 +237,8 @@ static int default_polling_getkey(struct em28xx_IR *ir,
> /* Infrared read count (Reg 0x45[6:0] */
> poll_result->read_count = (msg[0] & 0x7f);
>
> - /* Remote Control Address (Reg 0x46) */
> - poll_result->rc_address = msg[1];
> -
> - /* Remote Control Data (Reg 0x47) */
> - poll_result->rc_data[0] = msg[2];
> + /* Remote Control Address/Data (Regs 0x46/0x47) */
> + poll_result->scancode = msg[1] << 8 | msg[2];
>
> return 0;
> }
> @@ -266,13 +264,32 @@ static int em2874_polling_getkey(struct em28xx_IR *ir,
> /* Infrared read count (Reg 0x51[6:0] */
> poll_result->read_count = (msg[0] & 0x7f);
>
> - /* Remote Control Address (Reg 0x52) */
> - poll_result->rc_address = msg[1];
> -
> - /* Remote Control Data (Reg 0x53-55) */
> - poll_result->rc_data[0] = msg[2];
> - poll_result->rc_data[1] = msg[3];
> - poll_result->rc_data[2] = msg[4];
> + /*
> + * Remote Control Address (Reg 0x52)
> + * Remote Control Data (Reg 0x53-0x55)
> + */
Should be
+ /*
+ * Remote Control Scan Code (Reg 0x52-0x55)
+ */
> + switch (ir->rc_type) {
> + case RC_BIT_RC5:
> + poll_result->scancode = msg[1] << 8 | msg[2];
> + break;
> + case RC_BIT_NEC:
> + if ((msg[3] ^ msg[4]) != 0xff) /* 32 bits NEC */
> + poll_result->scancode = (msg[1] << 24) |
> + (msg[2] << 16) |
> + (msg[3] << 8) |
> + msg[4];
> + else if ((msg[1] ^ msg[2]) != 0xff) /* 24 bits NEC */
> + poll_result->scancode = (msg[1] << 16) |
> + (msg[2] << 8) |
> + msg[3];
> + else /* Normal NEC */
> + poll_result->scancode = msg[1] << 8 | msg[3];
> + break;
> + default:
> + poll_result->scancode = (msg[1] << 24) | (msg[2] << 16) |
> + (msg[3] << 8) | msg[4];
> + break;
> + }
>
> return 0;
> }
> @@ -294,17 +311,16 @@ static void em28xx_ir_handle_key(struct em28xx_IR *ir)
> }
>
> if (unlikely(poll_result.read_count != ir->last_readcount)) {
> - dprintk("%s: toggle: %d, count: %d, key 0x%02x%02x\n", __func__,
> + dprintk("%s: toggle: %d, count: %d, key 0x%04x\n", __func__,
> poll_result.toggle_bit, poll_result.read_count,
> - poll_result.rc_address, poll_result.rc_data[0]);
> + poll_result.scancode);
> if (ir->full_code)
> rc_keydown(ir->rc,
> - poll_result.rc_address << 8 |
> - poll_result.rc_data[0],
> + poll_result.scancode,
> poll_result.toggle_bit);
> else
> rc_keydown(ir->rc,
> - poll_result.rc_data[0],
> + poll_result.scancode & 0xff,
> poll_result.toggle_bit);
>
> if (ir->dev->chip_id == CHIP_ID_EM2874 ||
> @@ -360,12 +376,14 @@ static int em28xx_ir_change_protocol(struct rc_dev
> *rc_dev, u64 *rc_type)
> *rc_type = RC_BIT_RC5;
> } else if (*rc_type & RC_BIT_NEC) {
> dev->board.xclk &= ~EM28XX_XCLK_IR_RC5_MODE;
> - ir_config = EM2874_IR_NEC;
> + ir_config = EM2874_IR_NEC | EM2874_IR_NEC_NO_PARITY;
> ir->full_code = 1;
> *rc_type = RC_BIT_NEC;
> } else if (*rc_type != RC_BIT_UNKNOWN)
> rc = -EINVAL;
>
> + ir->rc_type = *rc_type;
> +
This is actually a bug fix, right ?
The patch looks good.
Regards,
Frank
> em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, dev->board.xclk,
> EM28XX_XCLK_IR_RC5_MODE);
>
> diff --git a/drivers/media/usb/em28xx/em28xx-reg.h
> b/drivers/media/usb/em28xx/em28xx-reg.h
> index 6ff3682..2ad3573 100644
> --- a/drivers/media/usb/em28xx/em28xx-reg.h
> +++ b/drivers/media/usb/em28xx/em28xx-reg.h
> @@ -177,6 +177,7 @@
>
> /* em2874 IR config register (0x50) */
> #define EM2874_IR_NEC 0x00
> +#define EM2874_IR_NEC_NO_PARITY 0x01
> #define EM2874_IR_RC5 0x04
> #define EM2874_IR_RC6_MODE_0 0x08
> #define EM2874_IR_RC6_MODE_6A 0x0b
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html