On Sat, 15 Dec 2012 17:58:01 +0800
Albert Wang <[email protected]> wrote:
> This patch adds the soc_camera support in the platform driver: mmp-driver.c.
> Specified board driver also should be modified to support soc_camera by
> passing
> some platform datas to platform driver.
>
> Currently the soc_camera mode in mmp driver only supports B_DMA_contig mode.
You do intend to add the other modes (or SG, at least) in the future?
> --- a/drivers/media/platform/marvell-ccic/Kconfig
> +++ b/drivers/media/platform/marvell-ccic/Kconfig
> @@ -1,23 +1,45 @@
> +config VIDEO_MARVELL_CCIC
> + tristate
> +config VIDEO_MRVL_SOC_CAMERA
> + bool
If Linus sees this you'll get an unpleasant reminder that vowels are not
actually in short supply; I'd suggest spelling out "MARVELL".
> diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c
> b/drivers/media/platform/marvell-ccic/mmp-driver.c
> index 40c243e..cd850f4 100755
> --- a/drivers/media/platform/marvell-ccic/mmp-driver.c
> +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
> @@ -28,6 +28,10 @@
> #include <linux/list.h>
> #include <linux/pm.h>
> #include <linux/clk.h>
> +#include <linux/regulator/consumer.h>
> +#include <media/videobuf2-dma-contig.h>
> +#include <media/soc_camera.h>
> +#include <media/soc_mediabus.h>
>
> #include "mcam-core.h"
>
> @@ -40,6 +44,8 @@ struct mmp_camera {
> struct platform_device *pdev;
> struct mcam_camera mcam;
> struct list_head devlist;
> + /* will change here */
> + struct clk *clk[3]; /* CCIC_GATE, CCIC_RST, CCIC_DBG clocks */
What does that comment mean?
> int irq;
> };
>
> @@ -144,15 +150,17 @@ static void mmpcam_power_up(struct mcam_camera *mcam)
> * Provide power to the sensor.
> */
> mcam_reg_write(mcam, REG_CLKCTRL, 0x60000002);
> - pdata = cam->pdev->dev.platform_data;
> - gpio_set_value(pdata->sensor_power_gpio, 1);
> - mdelay(5);
> + if (mcam->chip_id == V4L2_IDENT_ARMADA610) {
I'm seeing a lot of these tests being added to the code. I can imagine
more in the future as new chipsets are supported in the driver. Maybe it's
time to add a structure to hide chipset-specific low-level operations? It
would make the code a lot cleaner.
Actually, things like mmpcam_power_up() were meant to be exactly that. Can
we just define a different version of this function for different chipsets?
> + pdata = cam->pdev->dev.platform_data;
> + gpio_set_value(pdata->sensor_power_gpio, 1);
> + mdelay(5);
> + /* reset is active low */
> + gpio_set_value(pdata->sensor_reset_gpio, 0);
> + mdelay(5);
> + gpio_set_value(pdata->sensor_reset_gpio, 1);
> + mdelay(5);
> + }
> mcam_reg_clear_bit(mcam, REG_CTRL1, 0x10000000);
> - gpio_set_value(pdata->sensor_reset_gpio, 0); /* reset is active low */
> - mdelay(5);
> - gpio_set_value(pdata->sensor_reset_gpio, 1); /* reset is active low */
> - mdelay(5);
> -
> mcam_clk_set(mcam, 1);
> }
>
> @@ -165,13 +173,14 @@ static void mmpcam_power_down(struct mcam_camera *mcam)
> */
> iowrite32(0, cam->power_regs + REG_CCIC_DCGCR);
> iowrite32(0, cam->power_regs + REG_CCIC_CRCR);
> -/*
> - * Shut down the sensor.
> - */
> - pdata = cam->pdev->dev.platform_data;
> - gpio_set_value(pdata->sensor_power_gpio, 0);
> - gpio_set_value(pdata->sensor_reset_gpio, 0);
> -
> + if (mcam->chip_id == V4L2_IDENT_ARMADA610) {
Same comment applies here.
> + /*
> + * Shut down the sensor.
> + */
> + pdata = cam->pdev->dev.platform_data;
> + gpio_set_value(pdata->sensor_power_gpio, 0);
> + gpio_set_value(pdata->sensor_reset_gpio, 0);
> + }
> mcam_clk_set(mcam, 0);
jon
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html