i found it is a problem with kaffeine, with other programs i can lock a
signal but reception is very very sketchy (like in unviewable).
GlovX xine-lib # dmesg |grep e4000
GlovX xine-lib # dmesg |grep FC0012
GlovX xine-lib # dmesg |grep FC0013
[ 28.281685] fc0013: Fitipower FC0013 successfully attached.
GlovX xine-lib # dmesg |grep FC2580
GlovX xine-lib # dmesg |grep TUA
GlovX xine-lib #
Il 16/12/2012 18:55 Antti Palosaari ha scritto:
On 12/16/2012 07:15 PM, Renato Gallo wrote:
now the modules loads and kaffeine recognizes the device but i
cannot
find any channels.
can it be a tuner bug ?
I think it is bad antenna / weak signal. Try w_scan, scan, tzap.
Could you say which RF-tuner it finds from your device? use dmesg to
dump output. It could be for example e4000, FC0012, FC0013, FC2580,
TUA9001 etc.
Antti
kaffeine(5978) DvbDevice::frontendEvent: tuning failed
kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading
section;
type = 0 pid = 0
kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading
section;
type = 2 pid = 17
kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading
section;
type = 4 pid = 16
kaffeine(5978) DvbDevice::frontendEvent: tuning failed
kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading
section;
type = 0 pid = 0
kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading
section;
type = 2 pid = 17
kaffeine(5978) DvbScanFilter::timerEvent: timeout while reading
section;
type = 4 pid = 16
kaffeine(5978) DvbDevice::frontendEvent: tuning failed
Il 16/12/2012 15:50 Antti Palosaari ha scritto:
On 12/16/2012 04:23 PM, Renato Gallo wrote:
any news on this ?
Asus my cinema-u3100miniplusv2
Bus 001 Device 015: ID 1b80:d3a8 Afatech
[ 6956.333440] usb 1-6.3.6: new high-speed USB device number 16
using
ehci_hcd
[ 6956.453943] usb 1-6.3.6: New USB device found, idVendor=1b80,
idProduct=d3a8
[ 6956.453950] usb 1-6.3.6: New USB device strings: Mfr=1,
Product=2,
SerialNumber=0
[ 6956.453955] usb 1-6.3.6: Product: Rtl2832UDVB
[ 6956.453959] usb 1-6.3.6: Manufacturer: Realtek
Seems to be Realtek RTL2832U. Add that USB ID to the driver and
test.
It is very high probability it starts working.
Here is the patch:
http://git.linuxtv.org/anttip/media_tree.git/shortlog/refs/heads/rtl28xxu-usb-ids
Please test and report.
regards
Antti
--
To unsubscribe from this list: send the line "unsubscribe
linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
