Hi Laurent -
On Mon, 17 Dec 2012, Laurent Pinchart <laurent.pinch...@ideasonboard.com> wrote:
> Hi Tomi,
>
> I finally have time to work on a v3 :-)
>
> On Friday 23 November 2012 16:51:37 Tomi Valkeinen wrote:
>> On 2012-11-22 23:45, Laurent Pinchart wrote:
>> > From: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>
>> >
>> > Hi everybody,
>> >
>> > Here's the second RFC of what was previously known as the Generic Panel
>> > Framework.
>>
>> Nice work! Thanks for working on this.
>>
>> I was doing some testing with the code, seeing how to use it in omapdss.
>> Here are some thoughts:
>>
>> In your model the DSS gets the panel devices connected to it from
>> platform data. After the DSS and the panel drivers are loaded, DSS gets
>> a notification and connects DSS and the panel.
>>
>> I think it's a bit limited way. First of all, it'll make the DT data a
>> bit more complex (although this is not a major problem). With your
>> model, you'll need something like:
>>
>> soc-base.dtsi:
>>
>> dss {
>> dpi0: dpi {
>> };
>> };
>>
>> board.dts:
>>
>> &dpi0 {
>> panel = &dpi-panel;
>> };
>>
>> / {
>> dpi-panel: dpi-panel {
>> ...panel data...;
>> };
>> };
>>
>> Second, it'll prevent hotplug, and even if real hotplug would not be
>> supported, it'll prevent cases where the connected panel must be found
>> dynamically (like reading ID from eeprom).
>
> Hotplug definitely needs to be supported, as the common display framework
> also
> targets HDMI and DP. The notification mechanism was actually designed to
> support hotplug.
I can see the need for a framework for DSI panels and such (in fact Tomi
and I have talked about it like 2-3 years ago already!) but what is the
story for HDMI and DP? In particular, what's the relationship between
DRM and CDF here? Is there a world domination plan to switch the DRM
drivers to use this framework too? ;) Do you have some rough plans how
DRM and CDF should work together in general?
BR,
Jani.
>
> How do you see the proposal preventing hotplug ?
>
>> Third, it kinda creates a cyclical dependency: the DSS needs to know
>> about the panel and calls ops in the panel, and the panel calls ops in
>> the DSS. I'm not sure if this is an actual problem, but I usually find
>> it simpler if calls are done only in one direction.
>
> I don't see any way around that. The panel is not a standalone entity that
> can
> only receive calls (as it needs to control video streams, per your request
> :-)) or only emit calls (as something needs to control it, userspace doesn't
> control the panel directly).
>
>> What I suggest is take a simpler approach, something alike to how regulators
>> or gpios are used, even if slightly more complex than those: the entity that
>> has a video output (SoC's DSS, external chips) offers that video output as
>> resource. It doesn't know or care who uses it. The user of the video output
>> (panel, external chips) will find the video output (to which it is connected
>> in the HW) by some means, and will use different operations on that output
>> to operate the device.
>>
>> This would give us something like the following DT data:
>>
>> soc-base.dtsi:
>>
>> dss {
>> dpi0: dpi {
>> };
>> };
>>
>> board.dts:
>>
>> / {
>> dpi-panel: dpi-panel {
>> source = <&dpi0>;
>> ...panel data...;
>> };
>> };
>>
>> The panel driver would do something like this in its probe:
>>
>> int dpi_panel_probe()
>> {
>> // Find the video source, increase ref
>> src = get_video_source_from_of("source");
>>
>> // Reserve the video source for us. others can still get and
>> // observe it, but cannot use it as video data source.
>> // I think this should cascade upstream, so that after this call
>> // each video entity from the panel to the SoC's CRTC is
>> // reserved and locked for this video pipeline.
>> reserve_video_source(src);
>>
>> // set DPI HW configuration, like DPI data lines. The
>> // configuration would come from panel's platform data
>> set_dpi_config(src, config);
>>
>> // register this panel as a display.
>> register_display(this);
>> }
>>
>>
>> The DSS's dpi driver would do something like:
>>
>> int dss_dpi_probe()
>> {
>> // register as a DPI video source
>> register_video_source(this);
>> }
>>
>> A DSI-2-DPI chip would do something like:
>>
>> int dsi2dpi_probe()
>> {
>> // get, reserve and config the DSI bus from SoC
>> src = get_video_source_from_of("source");
>> reserve_video_source(src);
>> set_dsi_config(src, config);
>>
>> // register as a DPI video source
>> register_video_source(this);
>> }
>>
>>
>> Here we wouldn't have similar display_entity as you have, but video sources
>> and displays. Video sources are elements in the video pipeline, and a video
>> source is used only by the next downstream element. The last element in the
>> pipeline would not be a video source, but a display, which would be used by
>> the upper layer.
>
> I don't think we should handle pure sources, pure sinks (displays) and mixed
> entities (transceivers) differently. I prefer having abstract entities that
> can have a source and a sink, and expose the corresponding operations. That
> would make pipeline handling much easier, as the code will only need to deal
> with a single type of object. Implementing support for entities with multiple
> sinks and/or sources would also be possible.
>
>> Video source's ops would deal with things related to the video bus in
>> question, like configuring data lanes, sending DSI packets, etc. The
>> display ops would be more high level things, like enable, update, etc.
>> Actually, I guess you could consider the display to represent and deal
>> with the whole pipeline, while video source deals with the bus between
>> two display entities.
>
> What is missing in your proposal is an explanation of how the panel is
> controlled. What does your register_display() function register the display
> with, and what then calls the display operations ?
>
> --
> Regards,
>
> Laurent Pinchart
> _______________________________________________
> dri-devel mailing list
> dri-de...@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
