Em Fri, 28 Dec 2012 00:02:45 +0100
Frank Schäfer <fschaefer....@googlemail.com> escreveu:
> Tested with device "Terratec Cinergy 200 USB".
Sorry, but this patch is completely wrong ;)
The fix here is simple: just move the initialization to happen
earlier.
I'm posting it right now, together with a bunch of other fixes for
I2C-based IR devices.
Regards,
Mauro
>
> Signed-off-by: Frank Schäfer <fschaefer....@googlemail.com>
> ---
> drivers/media/usb/em28xx/em28xx-cards.c | 9 +-
> drivers/media/usb/em28xx/em28xx-i2c.c | 1 +
> drivers/media/usb/em28xx/em28xx-input.c | 142
> +++++++++++++++++--------------
> 3 Dateien geändert, 83 Zeilen hinzugefügt(+), 69 Zeilen entfernt(-)
>
> diff --git a/drivers/media/usb/em28xx/em28xx-cards.c
> b/drivers/media/usb/em28xx/em28xx-cards.c
> index 40c3e45..3b226b1 100644
> --- a/drivers/media/usb/em28xx/em28xx-cards.c
> +++ b/drivers/media/usb/em28xx/em28xx-cards.c
> @@ -488,6 +488,7 @@ struct em28xx_board em28xx_boards[] = {
> .name = "Terratec Cinergy 250 USB",
> .tuner_type = TUNER_LG_PAL_NEW_TAPC,
> .has_ir_i2c = 1,
> + .ir_codes = RC_MAP_EM_TERRATEC,
> .tda9887_conf = TDA9887_PRESENT,
> .decoder = EM28XX_SAA711X,
> .input = { {
> @@ -508,6 +509,7 @@ struct em28xx_board em28xx_boards[] = {
> .name = "Pinnacle PCTV USB 2",
> .tuner_type = TUNER_LG_PAL_NEW_TAPC,
> .has_ir_i2c = 1,
> + .ir_codes = RC_MAP_PINNACLE_GREY,
> .tda9887_conf = TDA9887_PRESENT,
> .decoder = EM28XX_SAA711X,
> .input = { {
> @@ -533,6 +535,7 @@ struct em28xx_board em28xx_boards[] = {
> .decoder = EM28XX_TVP5150,
> .has_msp34xx = 1,
> .has_ir_i2c = 1,
> + .ir_codes = RC_MAP_HAUPPAUGE,
> .input = { {
> .type = EM28XX_VMUX_TELEVISION,
> .vmux = TVP5150_COMPOSITE0,
> @@ -629,6 +632,7 @@ struct em28xx_board em28xx_boards[] = {
> .valid = EM28XX_BOARD_NOT_VALIDATED,
> .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
> .has_ir_i2c = 1,
> + .ir_codes = RC_MAP_WINFAST_USBII_DELUXE,
> .tvaudio_addr = 0x58,
> .tda9887_conf = TDA9887_PRESENT |
> TDA9887_PORT2_ACTIVE |
> @@ -1222,6 +1226,7 @@ struct em28xx_board em28xx_boards[] = {
> .name = "Terratec Cinergy 200 USB",
> .is_em2800 = 1,
> .has_ir_i2c = 1,
> + .ir_codes = RC_MAP_EM_TERRATEC,
> .tuner_type = TUNER_LG_TALN,
> .tda9887_conf = TDA9887_PRESENT,
> .decoder = EM28XX_SAA711X,
> @@ -2912,7 +2917,7 @@ static void request_module_async(struct work_struct
> *work)
>
> if (dev->board.has_dvb)
> request_module("em28xx-dvb");
> - if (dev->board.ir_codes && !disable_ir)
> + if ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir)
> request_module("em28xx-rc");
> #endif /* CONFIG_MODULES */
> }
> @@ -2935,8 +2940,6 @@ static void flush_request_modules(struct em28xx *dev)
> */
> void em28xx_release_resources(struct em28xx *dev)
> {
> - /*FIXME: I2C IR should be disconnected */
> -
> em28xx_release_analog_resources(dev);
>
> em28xx_i2c_unregister(dev);
> diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c
> b/drivers/media/usb/em28xx/em28xx-i2c.c
> index 44533e4..39c5a3e 100644
> --- a/drivers/media/usb/em28xx/em28xx-i2c.c
> +++ b/drivers/media/usb/em28xx/em28xx-i2c.c
> @@ -470,6 +470,7 @@ static struct i2c_client em28xx_client_template = {
> static char *i2c_devs[128] = {
> [0x4a >> 1] = "saa7113h",
> [0x52 >> 1] = "drxk",
> + [0x3e >> 1] = "remote IR sensor",
> [0x60 >> 1] = "remote IR sensor",
> [0x8e >> 1] = "remote IR sensor",
> [0x86 >> 1] = "tda9887",
> diff --git a/drivers/media/usb/em28xx/em28xx-input.c
> b/drivers/media/usb/em28xx/em28xx-input.c
> index 3598221..631e252 100644
> --- a/drivers/media/usb/em28xx/em28xx-input.c
> +++ b/drivers/media/usb/em28xx/em28xx-input.c
> @@ -5,6 +5,7 @@
> Markus Rechberger <mrechber...@gmail.com>
> Mauro Carvalho Chehab <mche...@infradead.org>
> Sascha Sommer <saschasom...@freenet.de>
> + Copyright (C) 2012 Frank Schäfer <fschaefer....@googlemail.com>
>
> This program is free software; you can redistribute it and/or modify
> it under the terms of the GNU General Public License as published by
> @@ -34,6 +35,8 @@
> #define EM28XX_SBUTTON_QUERY_INTERVAL 500
> #define EM28XX_R0C_USBSUSP_SNAPSHOT 0x20
>
> +#define EM28XX_RC_QUERY_INTERVAL 100
> +
> static unsigned int ir_debug;
> module_param(ir_debug, int, 0644);
> MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
> @@ -67,13 +70,14 @@ struct em28xx_IR {
> char name[32];
> char phys[32];
>
> - /* poll external decoder */
> int polling;
> struct delayed_work work;
> unsigned int full_code:1;
> unsigned int last_readcount;
> u64 rc_type;
>
> + struct i2c_client *i2c_dev; /* external i2c IR receiver/decoder */
> +
> int (*get_key)(struct em28xx_IR *, struct em28xx_ir_poll_result *);
> };
>
> @@ -452,7 +456,7 @@ static int em28xx_ir_change_protocol(struct rc_dev
> *rc_dev, u64 *rc_type)
> }
> }
>
> -static void em28xx_register_i2c_ir(struct em28xx *dev)
> +static int em28xx_register_i2c_ir(struct em28xx *dev, struct rc_dev *rc_dev)
> {
> /* Leadtek winfast tv USBII deluxe can find a non working IR-device */
> /* at address 0x18, so if that address is needed for another board in */
> @@ -470,30 +474,46 @@ static void em28xx_register_i2c_ir(struct em28xx *dev)
> switch (dev->model) {
> case EM2800_BOARD_TERRATEC_CINERGY_200:
> case EM2820_BOARD_TERRATEC_CINERGY_250:
> - dev->init_data.ir_codes = RC_MAP_EM_TERRATEC;
> - dev->init_data.get_key = em28xx_get_key_terratec;
> dev->init_data.name = "i2c IR (EM28XX Terratec)";
> + dev->init_data.type = RC_BIT_OTHER;
> + dev->init_data.get_key = em28xx_get_key_terratec;
> break;
> case EM2820_BOARD_PINNACLE_USB_2:
> - dev->init_data.ir_codes = RC_MAP_PINNACLE_GREY;
> - dev->init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
> dev->init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
> + dev->init_data.type = RC_BIT_OTHER;
> + dev->init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
> break;
> case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
> - dev->init_data.ir_codes = RC_MAP_HAUPPAUGE;
> - dev->init_data.get_key = em28xx_get_key_em_haup;
> dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
> + dev->init_data.type = RC_BIT_RC5;
> + dev->init_data.get_key = em28xx_get_key_em_haup;
> break;
> case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
> - dev->init_data.ir_codes = RC_MAP_WINFAST_USBII_DELUXE;
> - dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe;
> dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)";
> + dev->init_data.type = RC_BIT_OTHER;
> + dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe;
> break;
> }
>
> - if (dev->init_data.name)
> + if (dev->init_data.name && dev->board.ir_codes) {
> + dev->init_data.ir_codes = dev->board.ir_codes;
> + dev->init_data.polling_interval = EM28XX_RC_QUERY_INTERVAL;
> + dev->init_data.rc_dev = rc_dev;
> info.platform_data = &dev->init_data;
> - i2c_new_probed_device(&dev->i2c_adap, &info, addr_list, NULL);
> + } else {
> + em28xx_warn("Unknown i2c remote control device.\n");
> + em28xx_warn("If the remote control doesn't work properly,
> please contact <linux-media@vger.kernel.org>\n");
> + }
> +
> + dev->ir->i2c_dev = i2c_new_probed_device(&dev->i2c_adap, &info,
> addr_list, NULL);
> + if (NULL == dev->ir->i2c_dev)
> + return -ENODEV;
> +
> +#if defined(CONFIG_MODULES) && defined(MODULE)
> + request_module("ir-kbd-i2c");
> +#endif
> +
> + return 0;
> }
>
> /**********************************************************
> @@ -590,7 +610,7 @@ static int em28xx_ir_init(struct em28xx *dev)
> int err = -ENOMEM;
> u64 rc_type;
>
> - if (dev->board.ir_codes == NULL) {
> + if (dev->board.ir_codes == NULL && !dev->board.has_ir_i2c) {
> /* No remote control support */
> em28xx_warn("Remote control support is not available for "
> "this card.\n");
> @@ -607,68 +627,56 @@ static int em28xx_ir_init(struct em28xx *dev)
> dev->ir = ir;
> ir->rc = rc;
>
> - /*
> - * em2874 supports more protocols. For now, let's just announce
> - * the two protocols that were already tested
> - */
> - rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC;
> - rc->priv = ir;
> - rc->change_protocol = em28xx_ir_change_protocol;
> - rc->open = em28xx_ir_start;
> - rc->close = em28xx_ir_stop;
> -
> - switch (dev->chip_id) {
> - case CHIP_ID_EM2860:
> - case CHIP_ID_EM2883:
> - rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC;
> - break;
> - case CHIP_ID_EM2884:
> - case CHIP_ID_EM2874:
> - case CHIP_ID_EM28174:
> - rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC | RC_BIT_RC6_0;
> - break;
> - default:
> - err = -ENODEV;
> - goto error;
> - }
> -
> - /* By default, keep protocol field untouched */
> - rc_type = RC_BIT_UNKNOWN;
> - err = em28xx_ir_change_protocol(rc, &rc_type);
> - if (err)
> - goto error;
> -
> - /* This is how often we ask the chip for IR information */
> - ir->polling = 100; /* ms */
> -
> - /* init input device */
> - snprintf(ir->name, sizeof(ir->name), "em28xx IR (%s)",
> - dev->name);
> -
> + snprintf(ir->name, sizeof(ir->name), "em28xx IR (%s)", dev->name);
> usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
> strlcat(ir->phys, "/input0", sizeof(ir->phys));
> + ir->polling = EM28XX_RC_QUERY_INTERVAL;
>
> - rc->input_name = ir->name;
> - rc->input_phys = ir->phys;
> - rc->input_id.bustype = BUS_USB;
> rc->input_id.version = 1;
> rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
> rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
> rc->dev.parent = &dev->udev->dev;
> - rc->map_name = dev->board.ir_codes;
> rc->driver_name = MODULE_NAME;
>
> - /* all done */
> - err = rc_register_device(rc);
> - if (err)
> - goto error;
> -
> - em28xx_register_i2c_ir(dev);
> + if (dev->board.has_ir_i2c) {
> + err = em28xx_register_i2c_ir(dev, rc);
> + if (err < 0)
> + goto error;
> + } else {
> + switch (dev->chip_id) {
> + case CHIP_ID_EM2860:
> + case CHIP_ID_EM2883:
> + rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC;
> + break;
> + case CHIP_ID_EM2884:
> + case CHIP_ID_EM2874:
> + case CHIP_ID_EM28174:
> + rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC |
> RC_BIT_RC6_0;
> + break;
> + default:
> + err = -ENODEV;
> + goto error;
> + }
> + rc->priv = ir;
> + rc->change_protocol = em28xx_ir_change_protocol;
> + rc->open = em28xx_ir_start;
> + rc->close = em28xx_ir_stop;
> + rc->input_name = ir->name;
> + rc->input_phys = ir->phys;
> + rc->input_id.bustype = BUS_USB;
> + rc->map_name = dev->board.ir_codes;
> +
> + /* By default, keep protocol field untouched */
> + rc_type = RC_BIT_UNKNOWN;
> + err = em28xx_ir_change_protocol(rc, &rc_type);
> + if (err)
> + goto error;
> +
> + err = rc_register_device(rc);
> + if (err < 0)
> + goto error;
> + }
>
> -#if defined(CONFIG_MODULES) && defined(MODULE)
> - if (dev->board.has_ir_i2c)
> - request_module("ir-kbd-i2c");
> -#endif
> if (dev->board.has_snapshot_button)
> em28xx_register_snapshot_button(dev);
>
> @@ -691,7 +699,9 @@ static int em28xx_ir_fini(struct em28xx *dev)
> if (!ir)
> return 0;
>
> - if (ir->rc)
> + if (ir->i2c_dev)
> + i2c_unregister_device(ir->i2c_dev);
> + else if (ir->rc)
> rc_unregister_device(ir->rc);
>
> /* done */
--
Cheers,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
