The ttusb2 module is already updated to recognize the TechnoTrend CT-3650
CI DVB C/T USB2.0 receiver in addition to the Pinnacle 400e. But if
MEDIA_SUBDRV_AUTOSELECT is used, the required tuner and demodulator
modules are not automatically selected. Here's a patch to fix that and add a
note of the CT-3650 to the online help of the ttusb2 module.
This patch applies cleanly to 3.7.6 and other 3.7.x kernels.
--- drivers/media/usb/dvb-usb/Kconfig~ 2013-01-21 21:45:40.000000000 +0200
+++ drivers/media/usb/dvb-usb/Kconfig 2013-01-23 17:51:26.000000000 +0200
@@ -202,8 +202,12 @@
select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT
select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT
help
- Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The
+ Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver and
+ the TechnoTrend CT-3650 CI DVB-C/T USB2.0 receiver. The
firmware protocol used by this module is similar to the one used by
the
old ttusb-driver - that's why the module is called dvb-usb-ttusb2.
--
Matti.Kurkela (at) iki.fi (tai welho.com)
Puhelin 050 566 5564
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html