The first 3 patches clean up / simplify the debugging and info messages a bit.
Patches 4, 5 and 6 fix two bugs I've noticed while working on the eeprom stuff.
Patches 7-10 add support for the newer eeproms with 16 bit address width.
This allows us to display the eeprom content, to calculate the eeprom hash for
board hints for devices with generic USB IDs, to read the device configuration
and to use tveeprom for Hauppauge devices just as with the old eeprom type.
The used eeprom type depends on the chip type/id (confirmed by the Empia
datasheets).
For unknown chips, the old 8 bit eeprom type is assumed, which makes sure that
the
eeprom content can't be damaged accidentally.
In video capturing/TV/DVB devices, the new eeprom still has the old eeprom
content
(device configuration + tveeprom structure for Hauppauge devices) embedded.
Camera devices (em25xx, em276x+) however are using a different data structure,
which isn't supported yet.
Patch 11 is a follow-up which enables tveeprom for the Hauppauge HVR-930C
All patches have been tested with the following devices:
- Hauppauge HVR-900 (normal 8 bit eeprom)
- Hauppauge HVR-930C (16 bit eeprom, tveeprom)
- SpeedLink VAD Laplace webcam (16 bit eeprom, no device config dataset)
I also checked the USB log of the MSI Digivox ATSC which confirms that
non-Hauppauge devices are using the same eeprom format.
Frank Schäfer (11):
em28xx-i2c: replace printk() with the corresponding em28xx macros
em28xx-i2c: get rid of the dprintk2 macro
em28xx-i2c: also print debug messages at debug level 1
em28xx: do not interpret eeprom content if eeprom key is invalid
em28xx: fix eeprom data endianess
em28xx: make sure we are at i2c bus A when calling
em28xx_i2c_register()
em28xx: add basic support for eeproms with 16 bit address width
em28xx: add helper function for reading data blocks from i2c clients
em28xx: do not store eeprom content permanently
em28xx: extract the device configuration dataset from eeproms with 16
bit address width
em28xx: enable tveeprom for device Hauppauge HVR-930C
drivers/media/usb/em28xx/em28xx-cards.c | 45 +++--
drivers/media/usb/em28xx/em28xx-i2c.c | 284 ++++++++++++++++++++-----------
drivers/media/usb/em28xx/em28xx.h | 17 +-
3 Dateien geändert, 225 Zeilen hinzugefügt(+), 121 Zeilen entfernt(-)
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
