On Fri, Mar 15, 2013 at 10:27:53PM +0100, Guennadi Liakhovetski wrote:
> Register the imx074 camera I2C and the CSI-2 platform devices directly
> in board platform data instead of letting the sh_mobile_ceu_camera driver
> and the soc-camera framework register them at their run-time. This uses
> the V4L2 asynchronous subdevice probing capability.
>
> Signed-off-by: Guennadi Liakhovetski <[email protected]>
> ---
>
> v6: no change
>
> arch/arm/mach-shmobile/board-ap4evb.c | 103 +++++++++++++++++++-------------
> arch/arm/mach-shmobile/clock-sh7372.c | 1 +
> 2 files changed, 62 insertions(+), 42 deletions(-)
>
> diff --git a/arch/arm/mach-shmobile/board-ap4evb.c
> b/arch/arm/mach-shmobile/board-ap4evb.c
> index 38f1259..450e06b 100644
> --- a/arch/arm/mach-shmobile/board-ap4evb.c
> +++ b/arch/arm/mach-shmobile/board-ap4evb.c
> @@ -50,6 +50,7 @@
> #include <media/sh_mobile_ceu.h>
> #include <media/sh_mobile_csi2.h>
> #include <media/soc_camera.h>
> +#include <media/v4l2-async.h>
>
> #include <sound/sh_fsi.h>
> #include <sound/simple_card.h>
> @@ -871,22 +872,32 @@ static struct platform_device leds_device = {
> },
> };
>
> -static struct i2c_board_info imx074_info = {
> - I2C_BOARD_INFO("imx074", 0x1a),
> +/* I2C */
> +static struct soc_camera_subdev_desc imx074_desc;
> +static struct i2c_board_info i2c0_devices[] = {
> + {
> + I2C_BOARD_INFO("ak4643", 0x13),
> + }, {
> + I2C_BOARD_INFO("imx074", 0x1a),
> + .platform_data = &imx074_desc,
> + },
> };
>
> -static struct soc_camera_link imx074_link = {
> - .bus_id = 0,
> - .board_info = &imx074_info,
> - .i2c_adapter_id = 0,
> - .module_name = "imx074",
> +static struct i2c_board_info i2c1_devices[] = {
> + {
> + I2C_BOARD_INFO("r2025sd", 0x32),
> + },
> };
>
> -static struct platform_device ap4evb_camera = {
> - .name = "soc-camera-pdrv",
> - .id = 0,
> - .dev = {
> - .platform_data = &imx074_link,
> +static struct resource csi2_resources[] = {
> + {
> + .name = "CSI2",
> + .start = 0xffc90000,
> + .end = 0xffc90fff,
> + .flags = IORESOURCE_MEM,
> + }, {
> + .start = intcs_evt2irq(0x17a0),
> + .flags = IORESOURCE_IRQ,
> },
> };
>
> @@ -895,7 +906,7 @@ static struct sh_csi2_client_config csi2_clients[] = {
> .phy = SH_CSI2_PHY_MAIN,
> .lanes = 0, /* default: 2 lanes */
> .channel = 0,
> - .pdev = &ap4evb_camera,
> + .name = "imx074",
> },
> };
>
> @@ -906,31 +917,50 @@ static struct sh_csi2_pdata csi2_info = {
> .flags = SH_CSI2_ECC | SH_CSI2_CRC,
> };
>
> -static struct resource csi2_resources[] = {
> - [0] = {
> - .name = "CSI2",
> - .start = 0xffc90000,
> - .end = 0xffc90fff,
> - .flags = IORESOURCE_MEM,
> +static struct platform_device csi2_device = {
> + .name = "sh-mobile-csi2",
> + .id = 0,
Is it more appropriate to use id = -1 here?
I am entirely unsure.
> + .num_resources = ARRAY_SIZE(csi2_resources),
> + .resource = csi2_resources,
> + .dev = {
> + .platform_data = &csi2_info,
> },
> - [1] = {
> - .start = intcs_evt2irq(0x17a0),
> - .flags = IORESOURCE_IRQ,
> +};
> +
> +static struct soc_camera_async_subdev csi2_sd = {
> + .asd.hw = {
> + .bus_type = V4L2_ASYNC_BUS_PLATFORM,
> + .match.platform.name = "sh-mobile-csi2.0",
> },
> + .role = SOCAM_SUBDEV_DATA_PROCESSOR,
> };
>
> -static struct sh_mobile_ceu_companion csi2 = {
> - .id = 0,
> - .num_resources = ARRAY_SIZE(csi2_resources),
> - .resource = csi2_resources,
> - .platform_data = &csi2_info,
> +static struct soc_camera_async_subdev imx074_sd = {
> + .asd.hw = {
> + .bus_type = V4L2_ASYNC_BUS_I2C,
> + .match.i2c = {
> + .adapter_id = 0,
> + .address = 0x1a,
> + },
> + },
> + .role = SOCAM_SUBDEV_DATA_SOURCE,
> };
>
> +static struct v4l2_async_subdev *ceu_subdevs[] = {
> + /* Single 2-element group */
> + &csi2_sd.asd,
> + &imx074_sd.asd,
> +};
> +
> +/* 0-terminated array of group-sizes */
> +static int ceu_subdev_sizes[] = {ARRAY_SIZE(ceu_subdevs), 0};
> +
> static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
> .flags = SH_CEU_FLAG_USE_8BIT_BUS,
> .max_width = 8188,
> .max_height = 8188,
> - .csi2 = &csi2,
> + .asd = ceu_subdevs,
> + .asd_sizes = ceu_subdev_sizes,
> };
>
> static struct resource ceu_resources[] = {
> @@ -975,7 +1005,7 @@ static struct platform_device *ap4evb_devices[]
> __initdata = {
> &lcdc_device,
> &lcdc1_device,
> &ceu_device,
> - &ap4evb_camera,
> + &csi2_device,
> &meram_device,
> };
>
> @@ -1070,19 +1100,6 @@ static struct i2c_board_info tsc_device = {
> /*.irq is selected on ap4evb_init */
> };
>
> -/* I2C */
> -static struct i2c_board_info i2c0_devices[] = {
> - {
> - I2C_BOARD_INFO("ak4643", 0x13),
> - },
> -};
> -
> -static struct i2c_board_info i2c1_devices[] = {
> - {
> - I2C_BOARD_INFO("r2025sd", 0x32),
> - },
> -};
> -
>
> #define GPIO_PORT9CR IOMEM(0xE6051009)
> #define GPIO_PORT10CR IOMEM(0xE605100A)
> @@ -1097,6 +1114,7 @@ static void __init ap4evb_init(void)
> { "A3SP", &sdhi0_device, },
> { "A3SP", &sdhi1_device, },
> { "A4R", &ceu_device, },
> + { "A4R", &csi2_device, },
> };
> u32 srcr4;
> struct clk *clk;
> @@ -1324,6 +1342,7 @@ static void __init ap4evb_init(void)
> sh7372_pm_init();
> pm_clk_add(&fsi_device.dev, "spu2");
> pm_clk_add(&lcdc1_device.dev, "hdmi");
> + pm_clk_add(&csi2_device.dev, "csir");
> }
>
> MACHINE_START(AP4EVB, "ap4evb")
> diff --git a/arch/arm/mach-shmobile/clock-sh7372.c
> b/arch/arm/mach-shmobile/clock-sh7372.c
> index 45d21fe..2e8cb42 100644
> --- a/arch/arm/mach-shmobile/clock-sh7372.c
> +++ b/arch/arm/mach-shmobile/clock-sh7372.c
> @@ -617,6 +617,7 @@ static struct clk_lookup lookups[] = {
> CLKDEV_ICK_ID("divb", "sh_fsi2", &fsidivs[FSIDIV_B]),
> CLKDEV_ICK_ID("xcka", "sh_fsi2", &fsiack_clk),
> CLKDEV_ICK_ID("xckb", "sh_fsi2", &fsibck_clk),
> + CLKDEV_ICK_ID("csir", "sh-mobile-csi2.0", &div4_clks[DIV4_CSIR]),
> };
>
> void __init sh7372_clock_init(void)
> --
> 1.7.2.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html