Hi Mauro, I've attached the dumps:
ok.txt is tested with commit aab3125c43d8fecc7134e5f1e729fabf4dd196da^ (i.e.
the commit right before the failing commit).
fail.txt is tested with commit aab3125c43d8fecc7134e5f1e729fabf4dd196da and
fail-with-patch.txt is tested with the same commit + your i2c speed patch.
Test sequence: start the sniffer, insert the stick, run v4l2-ctl -f 61.25 to
change the frequency. All on the same PC. Note that this PC is different from
the one I used yesterday, so it is not specific to one unlucky hardware
combination.
Regards,
Hans
On Thu March 21 2013 17:23:44 Mauro Carvalho Chehab wrote:
> Em Thu, 21 Mar 2013 16:34:13 +0100
> Hans Verkuil <[email protected]> escreveu:
>
> > On Thu March 21 2013 11:03:27 Mauro Carvalho Chehab wrote:
> > > Em Thu, 21 Mar 2013 09:33:41 +0100
> > > Hans Verkuil <[email protected]> escreveu:
> > >
> > > > I tried to use my HVR 900 stick today and discovered that it no longer
> > > > worked.
> > > > I traced it to commit aab3125c43d8fecc7134e5f1e729fabf4dd196da:
> > > > "em28xx: add
> > > > support for registering multiple i2c buses".
> > > >
> > > > The kernel messages for when it fails are:
> > > ...
> > > > Mar 21 09:26:57 telek kernel: [ 1396.542517] xc2028 12-0061: attaching
> > > > existing instance
> > > > Mar 21 09:26:57 telek kernel: [ 1396.542521] xc2028 12-0061: type set
> > > > to XCeive xc2028/xc3028 tuner
> > > > Mar 21 09:26:57 telek kernel: [ 1396.542523] em2882/3 #0: em2882/3
> > > > #0/2: xc3028 attached
> > > ...
> > > > Mar 21 09:26:57 telek kernel: [ 1396.547833] xc2028 12-0061: Error on
> > > > line 1293: -19
> > >
> > > Probably, the I2C speed is wrong. I noticed a small bug on this patch.
> > > The following patch should fix it. Could you please test?
> >
> > No luck, it didn't help.
>
> On a first glance, I've no idea what else is different for devices with
> just one I2C bus, like HVR-900.
>
> Could you send me an USB sniff dump with the kernel that works and with
> the broken kernel, with this patch applied?
>
> The parsing tools are under v4l-utils contrib/ dir.
>
> The first step is to check the usbmon interface for capture, with:
>
> $ ./parse_tcpdump_log.pl --list-devices
> usbmon4 ==> 020f (level 2)
> usbmon2 ==> USB2.0 Hub (level 1)
> usbmon1 ==> WinTV HVR-930C (level 7)
>
> Then, you can run the parser to capture the data:
>
> # ./parse_tcpdump_log.pl --device usbmon1 | ./em28xx/parse_em28xx.pl
>
> Please load the em28xx driver only after starting the parser, as we want
> to see what the driver is doing during the initialization.
>
> Thanks!
> Mauro
>
usbdump.tar.bz2
Description: application/bzip-compressed-tar
