Em Mon, 11 Mar 2013 12:45:47 +0100
Hans Verkuil <hverk...@xs4all.nl> escreveu:

> From: Hans Verkuil <hans.verk...@cisco.com>
> 
> The Sony BTF PG472Z has an internal MPX to deal with mono/stereo/bilingual
> audio. This is split off from the wis-sony-tuner driver that is part of
> the go7007 driver as it should be a separate i2c sub-device driver.
> 
> The wis-sony-tuner is really three i2c devices: a standard tuner, a tda9887
> compatible demodulator and this mpx. After this patch the wis-sony-tuner
> can be replaced by this driver and the standard tuner driver.
> 
> Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
> ---
>  drivers/media/i2c/Kconfig        |   11 +-
>  drivers/media/i2c/Makefile       |    1 +
>  drivers/media/i2c/sony-btf-mpx.c |  399 
> ++++++++++++++++++++++++++++++++++++++

Not sure what happened, but sony-btf-mpx.c got missed on the version inside
the pull request.

So, I got it from this patch.

>  3 files changed, 410 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/media/i2c/sony-btf-mpx.c
> 
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 7b771ba..70dbae2 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -133,7 +133,7 @@ config VIDEO_WM8739
>         module will be called wm8739.
>  
>  config VIDEO_VP27SMPX
> -     tristate "Panasonic VP27s internal MPX"
> +     tristate "Panasonic VP27's internal MPX"
>       depends on VIDEO_V4L2 && I2C
>       ---help---
>         Support for the internal MPX of the Panasonic VP27s tuner.
> @@ -141,6 +141,15 @@ config VIDEO_VP27SMPX
>         To compile this driver as a module, choose M here: the
>         module will be called vp27smpx.
>  
> +config VIDEO_SONY_BTF_MPX
> +     tristate "Sony BTF's internal MPX"
> +     depends on VIDEO_V4L2 && I2C
> +     help
> +       Support for the internal MPX of the Sony BTF-PG472Z tuner.
> +
> +       To compile this driver as a module, choose M here: the
> +       module will be called sony-btf-mpx.
> +
>  comment "RDS decoders"
>  
>  config VIDEO_SAA6588
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index cfefd30..4c57075 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -44,6 +44,7 @@ obj-$(CONFIG_VIDEO_TLV320AIC23B) += tlv320aic23b.o
>  obj-$(CONFIG_VIDEO_WM8775) += wm8775.o
>  obj-$(CONFIG_VIDEO_WM8739) += wm8739.o
>  obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o
> +obj-$(CONFIG_VIDEO_SONY_BTF_MPX) += sony-btf-mpx.o
>  obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o
>  obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
>  obj-$(CONFIG_VIDEO_OV7670)   += ov7670.o
> diff --git a/drivers/media/i2c/sony-btf-mpx.c 
> b/drivers/media/i2c/sony-btf-mpx.c
> new file mode 100644
> index 0000000..bc73e8f
> --- /dev/null
> +++ b/drivers/media/i2c/sony-btf-mpx.c
> @@ -0,0 +1,399 @@
> +/*
> + * Copyright (C) 2005-2006 Micronas USA Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License (Version 2) as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software Foundation,
> + * Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/i2c.h>
> +#include <linux/videodev2.h>
> +#include <media/tuner.h>
> +#include <media/v4l2-common.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/v4l2-device.h>
> +#include <linux/slab.h>
> +
> +MODULE_DESCRIPTION("sony-btf-mpx driver");
> +MODULE_LICENSE("GPL v2");
> +
> +static int debug;
> +module_param(debug, int, 0644);
> +MODULE_PARM_DESC(debug, "debug level 0=off(default) 1=on\n");
> +
> +/* #define MPX_DEBUG */
> +
> +/*
> + * Note:
> + *
> + * AS(IF/MPX) pin:      LOW      HIGH/OPEN
> + * IF/MPX address:   0x42/0x40   0x43/0x44
> + */
> +
> +
> +static int force_mpx_mode = -1;
> +module_param(force_mpx_mode, int, 0644);
> +
> +struct sony_btf_mpx {
> +     struct v4l2_subdev sd;
> +     int mpxmode;
> +     u32 audmode;
> +};
> +
> +static inline struct sony_btf_mpx *to_state(struct v4l2_subdev *sd)
> +{
> +     return container_of(sd, struct sony_btf_mpx, sd);
> +}
> +
> +static int mpx_write(struct i2c_client *client, int dev, int addr, int val)
> +{
> +     u8 buffer[5];
> +     struct i2c_msg msg;
> +
> +     buffer[0] = dev;
> +     buffer[1] = addr >> 8;
> +     buffer[2] = addr & 0xff;
> +     buffer[3] = val >> 8;
> +     buffer[4] = val & 0xff;
> +     msg.addr = client->addr;
> +     msg.flags = 0;
> +     msg.len = 5;
> +     msg.buf = buffer;
> +     i2c_transfer(client->adapter, &msg, 1);
> +     return 0;
> +}
> +
> +/*
> + * MPX register values for the BTF-PG472Z:
> + *
> + *                                 FM_     NICAM_  SCART_
> + *          MODUS  SOURCE    ACB   PRESCAL PRESCAL PRESCAL SYSTEM  VOLUME
> + *         10/0030 12/0008 12/0013 12/000E 12/0010 12/0000 10/0020 12/0000
> + *         ---------------------------------------------------------------
> + * Auto     1003    0020    0100    2603    5000    XXXX    0001    7500
> + *
> + * B/G
> + *  Mono    1003    0020    0100    2603    5000    XXXX    0003    7500
> + *  A2      1003    0020    0100    2601    5000    XXXX    0003    7500
> + *  NICAM   1003    0120    0100    2603    5000    XXXX    0008    7500
> + *
> + * I
> + *  Mono    1003    0020    0100    2603    7900    XXXX    000A    7500
> + *  NICAM   1003    0120    0100    2603    7900    XXXX    000A    7500
> + *
> + * D/K
> + *  Mono    1003    0020    0100    2603    5000    XXXX    0004    7500
> + *  A2-1    1003    0020    0100    2601    5000    XXXX    0004    7500
> + *  A2-2    1003    0020    0100    2601    5000    XXXX    0005    7500
> + *  A2-3    1003    0020    0100    2601    5000    XXXX    0007    7500
> + *  NICAM   1003    0120    0100    2603    5000    XXXX    000B    7500
> + *
> + * L/L'
> + *  Mono    0003    0200    0100    7C03    5000    2200    0009    7500
> + *  NICAM   0003    0120    0100    7C03    5000    XXXX    0009    7500
> + *
> + * M
> + *  Mono    1003    0200    0100    2B03    5000    2B00    0002    7500
> + *
> + * For Asia, replace the 0x26XX in FM_PRESCALE with 0x14XX.
> + *
> + * Bilingual selection in A2/NICAM:
> + *
> + *         High byte of SOURCE     Left chan   Right chan
> + *                 0x01              MAIN         SUB
> + *                 0x03              MAIN         MAIN
> + *                 0x04              SUB          SUB
> + *
> + * Force mono in NICAM by setting the high byte of SOURCE to 0x02 (L/L') or
> + * 0x00 (all other bands).  Force mono in A2 with FMONO_A2:
> + *
> + *                      FMONO_A2
> + *                      10/0022
> + *                      --------
> + *     Forced mono ON     07F0
> + *     Forced mono OFF    0190
> + */
> +
> +static const struct {
> +     enum { AUD_MONO, AUD_A2, AUD_NICAM, AUD_NICAM_L } audio_mode;
> +     u16 modus;
> +     u16 source;
> +     u16 acb;
> +     u16 fm_prescale;
> +     u16 nicam_prescale;
> +     u16 scart_prescale;
> +     u16 system;
> +     u16 volume;
> +} mpx_audio_modes[] = {
> +     /* Auto */      { AUD_MONO,     0x1003, 0x0020, 0x0100, 0x2603,
> +                                     0x5000, 0x0000, 0x0001, 0x7500 },
> +     /* B/G Mono */  { AUD_MONO,     0x1003, 0x0020, 0x0100, 0x2603,
> +                                     0x5000, 0x0000, 0x0003, 0x7500 },
> +     /* B/G A2 */    { AUD_A2,       0x1003, 0x0020, 0x0100, 0x2601,
> +                                     0x5000, 0x0000, 0x0003, 0x7500 },
> +     /* B/G NICAM */ { AUD_NICAM,    0x1003, 0x0120, 0x0100, 0x2603,
> +                                     0x5000, 0x0000, 0x0008, 0x7500 },
> +     /* I Mono */    { AUD_MONO,     0x1003, 0x0020, 0x0100, 0x2603,
> +                                     0x7900, 0x0000, 0x000A, 0x7500 },
> +     /* I NICAM */   { AUD_NICAM,    0x1003, 0x0120, 0x0100, 0x2603,
> +                                     0x7900, 0x0000, 0x000A, 0x7500 },
> +     /* D/K Mono */  { AUD_MONO,     0x1003, 0x0020, 0x0100, 0x2603,
> +                                     0x5000, 0x0000, 0x0004, 0x7500 },
> +     /* D/K A2-1 */  { AUD_A2,       0x1003, 0x0020, 0x0100, 0x2601,
> +                                     0x5000, 0x0000, 0x0004, 0x7500 },
> +     /* D/K A2-2 */  { AUD_A2,       0x1003, 0x0020, 0x0100, 0x2601,
> +                                     0x5000, 0x0000, 0x0005, 0x7500 },
> +     /* D/K A2-3 */  { AUD_A2,       0x1003, 0x0020, 0x0100, 0x2601,
> +                                     0x5000, 0x0000, 0x0007, 0x7500 },
> +     /* D/K NICAM */ { AUD_NICAM,    0x1003, 0x0120, 0x0100, 0x2603,
> +                                     0x5000, 0x0000, 0x000B, 0x7500 },
> +     /* L/L' Mono */ { AUD_MONO,     0x0003, 0x0200, 0x0100, 0x7C03,
> +                                     0x5000, 0x2200, 0x0009, 0x7500 },
> +     /* L/L' NICAM */{ AUD_NICAM_L,  0x0003, 0x0120, 0x0100, 0x7C03,
> +                                     0x5000, 0x0000, 0x0009, 0x7500 },
> +};
> +
> +#define MPX_NUM_MODES        ARRAY_SIZE(mpx_audio_modes)
> +
> +static int mpx_setup(struct sony_btf_mpx *t)
> +{
> +     struct i2c_client *client = v4l2_get_subdevdata(&t->sd);
> +     u16 source = 0;
> +     u8 buffer[3];
> +     struct i2c_msg msg;
> +     int mode = t->mpxmode;
> +
> +     /* reset MPX */
> +     buffer[0] = 0x00;
> +     buffer[1] = 0x80;
> +     buffer[2] = 0x00;
> +     msg.addr = client->addr;
> +     msg.flags = 0;
> +     msg.len = 3;
> +     msg.buf = buffer;
> +     i2c_transfer(client->adapter, &msg, 1);
> +     buffer[1] = 0x00;
> +     i2c_transfer(client->adapter, &msg, 1);
> +
> +     if (t->audmode != V4L2_TUNER_MODE_MONO)
> +             mode++;
> +
> +     if (mpx_audio_modes[mode].audio_mode != AUD_MONO) {
> +             switch (t->audmode) {
> +             case V4L2_TUNER_MODE_MONO:
> +                     switch (mpx_audio_modes[mode].audio_mode) {
> +                     case AUD_A2:
> +                             source = mpx_audio_modes[mode].source;
> +                             break;
> +                     case AUD_NICAM:
> +                             source = 0x0000;
> +                             break;
> +                     case AUD_NICAM_L:
> +                             source = 0x0200;
> +                             break;
> +                     default:
> +                             break;
> +                     }
> +                     break;
> +             case V4L2_TUNER_MODE_STEREO:
> +                     source = mpx_audio_modes[mode].source;
> +                     break;
> +             case V4L2_TUNER_MODE_LANG1:
> +                     source = 0x0300;
> +                     break;
> +             case V4L2_TUNER_MODE_LANG2:
> +                     source = 0x0400;
> +                     break;
> +             }
> +             source |= mpx_audio_modes[mode].source & 0x00ff;
> +     } else
> +             source = mpx_audio_modes[mode].source;
> +
> +     mpx_write(client, 0x10, 0x0030, mpx_audio_modes[mode].modus);
> +     mpx_write(client, 0x12, 0x0008, source);
> +     mpx_write(client, 0x12, 0x0013, mpx_audio_modes[mode].acb);
> +     mpx_write(client, 0x12, 0x000e,
> +                     mpx_audio_modes[mode].fm_prescale);
> +     mpx_write(client, 0x12, 0x0010,
> +                     mpx_audio_modes[mode].nicam_prescale);
> +     mpx_write(client, 0x12, 0x000d,
> +                     mpx_audio_modes[mode].scart_prescale);
> +     mpx_write(client, 0x10, 0x0020, mpx_audio_modes[mode].system);
> +     mpx_write(client, 0x12, 0x0000, mpx_audio_modes[mode].volume);
> +     if (mpx_audio_modes[mode].audio_mode == AUD_A2)
> +             mpx_write(client, 0x10, 0x0022,
> +                     t->audmode == V4L2_TUNER_MODE_MONO ? 0x07f0 : 0x0190);
> +
> +#ifdef MPX_DEBUG
> +     {
> +             u8 buf1[3], buf2[2];
> +             struct i2c_msg msgs[2];
> +
> +             v4l2_info(client,
> +                     "MPX registers: %04x %04x %04x %04x %04x %04x %04x 
> %04x\n",
> +                     mpx_audio_modes[mode].modus,
> +                     source,
> +                     mpx_audio_modes[mode].acb,
> +                     mpx_audio_modes[mode].fm_prescale,
> +                     mpx_audio_modes[mode].nicam_prescale,
> +                     mpx_audio_modes[mode].scart_prescale,
> +                     mpx_audio_modes[mode].system,
> +                     mpx_audio_modes[mode].volume);
> +             buf1[0] = 0x11;
> +             buf1[1] = 0x00;
> +             buf1[2] = 0x7e;
> +             msgs[0].addr = client->addr;
> +             msgs[0].flags = 0;
> +             msgs[0].len = 3;
> +             msgs[0].buf = buf1;
> +             msgs[1].addr = client->addr;
> +             msgs[1].flags = I2C_M_RD;
> +             msgs[1].len = 2;
> +             msgs[1].buf = buf2;
> +             i2c_transfer(client->adapter, msgs, 2);
> +             v4l2_info(client, "MPX system: %02x%02x\n",
> +                             buf2[0], buf2[1]);
> +             buf1[0] = 0x11;
> +             buf1[1] = 0x02;
> +             buf1[2] = 0x00;
> +             i2c_transfer(client->adapter, msgs, 2);
> +             v4l2_info(client, "MPX status: %02x%02x\n",
> +                             buf2[0], buf2[1]);
> +     }
> +#endif
> +     return 0;
> +}
> +
> +
> +static int sony_btf_mpx_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
> +{
> +     struct sony_btf_mpx *t = to_state(sd);
> +     int default_mpx_mode = 0;
> +
> +     if (std & V4L2_STD_PAL_BG)
> +             default_mpx_mode = 1;
> +     else if (std & V4L2_STD_PAL_I)
> +             default_mpx_mode = 4;
> +     else if (std & V4L2_STD_PAL_DK)
> +             default_mpx_mode = 6;
> +     else if (std & V4L2_STD_SECAM_L)
> +             default_mpx_mode = 11;
> +
> +     if (default_mpx_mode != t->mpxmode) {
> +             t->mpxmode = default_mpx_mode;
> +             mpx_setup(t);
> +     }
> +     return 0;
> +}
> +
> +static int sony_btf_mpx_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner 
> *vt)
> +{
> +     struct sony_btf_mpx *t = to_state(sd);
> +
> +     vt->capability = V4L2_TUNER_CAP_NORM |
> +             V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 |
> +             V4L2_TUNER_CAP_LANG2;
> +     vt->rxsubchans = V4L2_TUNER_SUB_MONO |
> +             V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_LANG1 |
> +             V4L2_TUNER_SUB_LANG2;
> +     vt->audmode = t->audmode;
> +     return 0;
> +}
> +
> +static int sony_btf_mpx_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner 
> *vt)
> +{
> +     struct sony_btf_mpx *t = to_state(sd);
> +
> +     if (vt->type != V4L2_TUNER_ANALOG_TV)
> +             return -EINVAL;
> +
> +     if (vt->audmode != t->audmode) {
> +             t->audmode = vt->audmode;
> +             mpx_setup(t);
> +     }
> +     return 0;
> +}
> +
> +/* 
> --------------------------------------------------------------------------*/
> +
> +static const struct v4l2_subdev_core_ops sony_btf_mpx_core_ops = {
> +     .s_std = sony_btf_mpx_s_std,
> +};
> +
> +static const struct v4l2_subdev_tuner_ops sony_btf_mpx_tuner_ops = {
> +     .s_tuner = sony_btf_mpx_s_tuner,
> +     .g_tuner = sony_btf_mpx_g_tuner,
> +};
> +
> +static const struct v4l2_subdev_ops sony_btf_mpx_ops = {
> +     .core = &sony_btf_mpx_core_ops,
> +     .tuner = &sony_btf_mpx_tuner_ops,
> +};
> +
> +/* 
> --------------------------------------------------------------------------*/
> +
> +static int sony_btf_mpx_probe(struct i2c_client *client,
> +                             const struct i2c_device_id *id)
> +{
> +     struct sony_btf_mpx *t;
> +     struct v4l2_subdev *sd;
> +
> +     if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
> +             return -ENODEV;
> +
> +     v4l_info(client, "chip found @ 0x%x (%s)\n",
> +                     client->addr << 1, client->adapter->name);
> +
> +     t = kzalloc(sizeof(struct sony_btf_mpx), GFP_KERNEL);
> +     if (t == NULL)
> +             return -ENOMEM;
> +
> +     sd = &t->sd;
> +     v4l2_i2c_subdev_init(sd, client, &sony_btf_mpx_ops);
> +
> +     /* Initialize sony_btf_mpx */
> +     t->mpxmode = 0;
> +     t->audmode = V4L2_TUNER_MODE_STEREO;
> +
> +     return 0;
> +}
> +
> +static int sony_btf_mpx_remove(struct i2c_client *client)
> +{
> +     struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +
> +     v4l2_device_unregister_subdev(sd);
> +     kfree(to_state(sd));
> +
> +     return 0;
> +}
> +
> +/* ----------------------------------------------------------------------- */
> +
> +static const struct i2c_device_id sony_btf_mpx_id[] = {
> +     { "sony-btf-mpx", 0 },
> +     { }
> +};
> +MODULE_DEVICE_TABLE(i2c, sony_btf_mpx_id);
> +
> +static struct i2c_driver sony_btf_mpx_driver = {
> +     .driver = {
> +             .owner  = THIS_MODULE,
> +             .name   = "sony-btf-mpx",
> +     },
> +     .probe = sony_btf_mpx_probe,
> +     .remove = sony_btf_mpx_remove,
> +     .id_table = sony_btf_mpx_id,
> +};
> +module_i2c_driver(sony_btf_mpx_driver);


-- 

Cheers,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to