Spite the Geniatech X8000-MT dvb card is added long time ago to the kernel, it never worked. I have one of this cards branded as notOnlyTV LV3H http://www.linuxtv.org/wiki/index.php/NotOnlyTV_LV3H and it seems the gpios are wrong among other things. As I wrote in the linuxtv wiki entry this card works passing the options to work as a Leadtek WinFast DTV1800 Hybrid. Not fully tested but the important part (DVB) works fine with minor issues like dmesg floods with the message "Calling XC2028/3028 callback", but I don't know if this problem exists with other cards.
This is the board http://www.linuxtv.org/wiki/images/4/4a/X8000T-DVBT-PCI.jpg exactly the same as mine, and other boards like X3M HPC2000, or Jactek JH-600. I insist with the current code none of this boards work, all forums I visited people reported the card doesn't work. I tested the patch against 3.2.0-39 (my card is installed in a machine with Ubuntu 12.04.2 LTS), but I made the patch for what's currently in linux-tv git. Signed-off-by: Daniel Gonzalez <dgcbueu< at >gmail.com> --- a/drivers/media/pci/cx88/cx88-cards.c +++ b/drivers/media/pci/cx88/cx88-cards.c @@ -1753,37 +1753,38 @@ }, [CX88_BOARD_GENIATECH_X8000_MT] = { /* Also PowerColor Real Angel 330 and Geniatech X800 OEM */ + /* Works like Leadtek WinFast DTV1800 Hybrid */ .name = "Geniatech X8000-MT DVBT", .tuner_type = TUNER_XC2028, .tuner_addr = 0x61, .input = { { .type = CX88_VMUX_TELEVISION, .vmux = 0, - .gpio0 = 0x00000000, - .gpio1 = 0x00e3e341, - .gpio2 = 0x00000000, - .gpio3 = 0x00000000, + .gpio0 = 0x0400, + .gpio1 = 0x6040, + .gpio2 = 0x0000, + .gpio3 = 0x0000, }, { .type = CX88_VMUX_COMPOSITE1, .vmux = 1, - .gpio0 = 0x00000000, - .gpio1 = 0x00e3e361, - .gpio2 = 0x00000000, - .gpio3 = 0x00000000, + .gpio0 = 0x0400, + .gpio1 = 0x6060, + .gpio2 = 0x0000, + .gpio3 = 0x0000, }, { .type = CX88_VMUX_SVIDEO, .vmux = 2, - .gpio0 = 0x00000000, - .gpio1 = 0x00e3e361, - .gpio2 = 0x00000000, - .gpio3 = 0x00000000, + .gpio0 = 0x0400, + .gpio1 = 0x6060, + .gpio2 = 0x0000, + .gpio3 = 0x0000, } }, .radio = { .type = CX88_RADIO, - .gpio0 = 0x00000000, - .gpio1 = 0x00e3e341, - .gpio2 = 0x00000000, - .gpio3 = 0x00000000, + .gpio0 = 0x0400, + .gpio1 = 0x6000, + .gpio2 = 0x0000, + .gpio3 = 0x0000, }, .mpeg = CX88_MPEG_DVB, }, @@ -3114,7 +3115,6 @@ /* Board-specific callbacks */ switch (core->boardnr) { case CX88_BOARD_POWERCOLOR_REAL_ANGEL: - case CX88_BOARD_GENIATECH_X8000_MT: case CX88_BOARD_KWORLD_ATSC_120: return cx88_xc3028_geniatech_tuner_callback(core, command, arg); @@ -3124,6 +3124,7 @@ case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: return cx88_dvico_xc2028_callback(core, command, arg); + case CX88_BOARD_GENIATECH_X8000_MT: case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: case CX88_BOARD_WINFAST_DTV1800H: return cx88_xc3028_winfast1800h_callback(core, command, arg); @@ -3333,6 +3334,7 @@ udelay(1000); break; + case CX88_BOARD_GENIATECH_X8000_MT: case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: case CX88_BOARD_WINFAST_DTV1800H: cx88_xc3028_winfast1800h_callback(core, XC2028_TUNER_RESET, 0); @@ -3380,11 +3382,12 @@ ctl->demod = XC3028_FE_OREN538; break; case CX88_BOARD_GENIATECH_X8000_MT: - /* FIXME: For this board, the xc3028 never recovers after being - powered down (the reset GPIO probably is not set properly). - We don't have access to the hardware so we cannot determine - which GPIO is used for xc3028, so just disable power xc3028 - power management for now */ + ctl->demod = XC3028_FE_ZARLINK456; + if (core->i2c_algo.udelay < 16) + core->i2c_algo.udelay = 16; + /* FIXME: this avoids the kernel message: + xc2028 2-0061: Error on line 1212: -6 + (the reset GPIO probably is not set properly)*/ ctl->disable_power_mgmt = 1; break; case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: --- a/drivers/media/pci/cx88/cx88-dvb.c +++ b/drivers/media/pci/cx88/cx88-dvb.c @@ -544,7 +544,8 @@ static const struct zl10353_config cx88_geniatech_x8000_mt = { .demod_address = (0x1e >> 1), .no_tuner = 1, - .disable_i2c_gate_ctrl = 1, + //.disable_i2c_gate_ctrl = 1, + .if2 = 45600, }; static const struct s5h1411_config dvico_fusionhdtv7_config = { @@ -1365,13 +1366,15 @@ } break; case CX88_BOARD_GENIATECH_X8000_MT: - dev->ts_gen_cntrl = 0x00; fe0->dvb.frontend = dvb_attach(zl10353_attach, &cx88_geniatech_x8000_mt, &core->i2c_adap); - if (attach_xc3028(0x61, dev) < 0) - goto frontend_detach; + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; + if (attach_xc3028(0x61, dev) < 0) + goto frontend_detach; + } break; case CX88_BOARD_KWORLD_ATSC_120: fe0->dvb.frontend = dvb_attach(s5h1409_attach, --- a/drivers/media/pci/cx88/cx88-input.c +++ b/drivers/media/pci/cx88/cx88-input.c @@ -98,6 +98,7 @@ /* Take out the parity part */ gpio=(gpio & 0x7fd) + (auxgpio & 0xef); break; + case CX88_BOARD_GENIATECH_X8000_MT: case CX88_BOARD_WINFAST_DTV1000: case CX88_BOARD_WINFAST_DTV1800H: case CX88_BOARD_WINFAST_DTV1800H_XC4000: @@ -290,6 +291,7 @@ ir_codes = RC_MAP_HAUPPAUGE; ir->sampling = 1; break; + case CX88_BOARD_GENIATECH_X8000_MT: case CX88_BOARD_WINFAST_DTV2000H: case CX88_BOARD_WINFAST_DTV2000H_J: case CX88_BOARD_WINFAST_DTV1800H: -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
