Hello Hans,
That device is working very, thank you for it. Anyhow, I noticed two things.
1) it does not start transmitting just after I plug it - I have to
retune it!
Output says it is tuned to 95.160000 MHz by default, but it is not.
After I issue retune, just to same channel it starts working.
$ v4l2-ctl -d /dev/radio0 --set-freq=95.16
2) What is that log printing?
ALSA sound/usb/mixer.c:932 13:0: cannot get min/max values for control 2
(id 13)
usb 5-2: new full-speed USB device number 3 using ohci_hcd
usb 5-2: New USB device found, idVendor=046d, idProduct=0a0e
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: B-LINK USB Audio
usb 5-2: Manufacturer: HOLTEK
ALSA sound/usb/mixer.c:932 13:0: cannot get min/max values for control 2
(id 13)
radio-keene 5-2:1.2: V4L2 device registered as radio0
$ v4l2-ctl -d /dev/radio0 --all -L
Driver Info (not using libv4l2):
Driver name : radio-keene
Card type : Keene FM Transmitter
Bus info : usb-0000:00:13.0-2
Driver version: 3.9.0
Capabilities : 0x800C0000
Modulator
Radio
Frequency: 1522560 (95.160000 MHz)
Modulator:
Name : FM
Capabilities : 62.5 Hz stereo
Frequency range : 76.0 MHz - 108.0 MHz
Subchannel modulation: stereo
Priority: 2
User Controls
mute (bool) : default=0 value=0
FM Radio Modulator Controls
audio_compression_gain (int) : min=-15 max=18 step=3
default=0 value=0 flags=slider
pre_emphasis (menu) : min=0 max=2 default=1 value=1
1: 50 Microseconds
2: 75 Microseconds
tune_power_level (int) : min=84 max=118 step=1
default=118 value=118 flags=slider
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html