Hi,
On 04/26/2013 03:18 PM, Prabhakar Lad wrote:
> From: Lad, Prabhakar <prabhakar.cse...@gmail.com>
>
> add OF support for the adv7343 driver.
> +++ b/Documentation/devicetree/bindings/media/i2c/adv7343.txt
> @@ -0,0 +1,69 @@
> +* Analog Devices adv7343 video encoder
> +
> +The ADV7343 are high speed, digital-to-analog video encoders in a 64-lead
> LQFP
> +package. Six high speed, 3.3 V, 11-bit video DACs provide support for
> composite
> +(CVBS), S-Video (Y-C), and component (YPrPb/RGB) analog outputs in standard
> +definition (SD), enhanced definition (ED), or high definition (HD) video
> +formats.
> +
> +The ADV7343 have a 24-bit pixel input port that can be configured in a
> variety
> +of ways. SD video formats are supported over an SDR interface, and ED/HD
> video
> +formats are supported over SDR and DDR interfaces. Pixel data can be supplied
> +in either the YCrCb or RGB color spaces.
> +
> +Required Properties :
> +- compatible: Must be "ad,adv7343-encoder"
As Laurent pointed out, "-encoder" is probably not necessary, since
there is nothing else in the ADV7343 chip than the video encoder ?
> +Optional Properties :
> +- ad-adv7343-power-mode-sleep-mode: on enable the current consumption is
> + reduced to micro ampere level. All DACs
> and
> + the internal PLL circuit are disabled.
Why this needs to be specified in the device tree ? How will the hardware
be switched over to normal state if this property is set ?
Couldn't it be a default state by the driver ? And how is it related to
ad-adv7343-power-mode-dac-? properties ?
As pointed out earlier, vendor name in the property names should be separated
with commas, rather than dashes.
> +- ad-adv7343-power-mode-pll-ctrl: PLL and oversampling control. This control
> + allows internal PLL 1 circuit to be powered
> + down and the oversampling to beswitched
> off.
> +- ad-adv7343-power-mode-dac-1: power on/off DAC 1.
> +- ad-adv7343-power-mode-dac-2: power on/off DAC 2.
> +- ad-adv7343-power-mode-dac-3: power on/off DAC 3.
> +- ad-adv7343-power-mode-dac-4: power on/off DAC 4.
> +- ad-adv7343-power-mode-dac-5: power on/off DAC 5.
> +- ad-adv7343-power-mode-dac-6: power on/off DAC 6.
Is this somehow related to actual wiring on a PCB ? It's also not really
explicit what value corresponds to which state.
> +- ad-adv7343-sd-config-dac-out-1: Configure SD DAC Output 1.
> +- ad-adv7343-sd-config-dac-out-2: Configure SD DAC Output 2.
What are valid values and their meaning ?
> +Example:
> +
> +i2c0@1c22000 {
> + adv7343@2a {
> + compatible = "ad,adv7343-encoder";
> + reg = <0x2a>;
> +
> + port {
> + adv7343_1: endpoint {
> + /* Active high (Defaults to false) */
> + ad-adv7343-power-mode-sleep-mode;
> + /* Active high (Defaults to false) */
Isn't it obvious that if property is not listed it will default to false ?
> + ad-adv7343-power-mode-pll-ctrl;
> + /* Active high (Defaults to false) */
> + ad-adv7343-power-mode-dac-1;
> + /* Active high (Defaults to false) */
> + ad-adv7343-power-mode-dac-2;
> + /* Active high (Defaults to false) */
> + ad-adv7343-power-mode-dac-3;
> + /* Active high (Defaults to false) */
> + ad-adv7343-power-mode-dac-4;
> + /* Active high (Defaults to false) */
> + ad-adv7343-power-mode-dac-5;
> + /* Active high (Defaults to false) */
> + ad-adv7343-power-mode-dac-6;
> + /* Active high (Defaults to false) */
> + ad-adv7343-sd-config-dac-out-1;
> + /* Active high (Defaults to false) */
> + ad-adv7343-sd-config-dac-out-2 = <0>;
> + };
> + };
> + };
> + ...
> +};
> diff --git a/drivers/media/i2c/adv7343.c b/drivers/media/i2c/adv7343.c
> index 469e262..eb12d1a 100644
> +static void adv7343_get_pdata(struct i2c_client *client,
> + struct adv7343_state *decoder)
> +{
> + if (!client->dev.platform_data && client->dev.of_node) {
> + struct device_node *np;
> + struct adv7343_platform_data *pdata;
> +
> + np = v4l2_of_get_next_endpoint(client->dev.of_node, NULL);
> + if (!np)
> + return;
> +
> + pdata = devm_kzalloc(&client->dev,
> + sizeof(struct adv7343_platform_data),
> + GFP_KERNEL);
> + if (!pdata) {
> + pr_warn("adv7343 failed allocate memeory\n");
Note that (devm_)k*alloc() functions already log any errors. If this function
would be returning pointer to platform data this error message would not be
needed for sure.
> + return;
> + }
> +
> + pdata->mode_config.sleep_mode =
> + of_property_read_bool(np, "ad-adv7343-power-mode-sleep-mode");
> +
> + pdata->mode_config.pll_control =
> + of_property_read_bool(np, "ad-adv7343-power-mode-pll-ctrl");
> +
> + pdata->mode_config.dac_1 =
> + of_property_read_bool(np, "ad-adv7343-power-mode-dac-1");
> +
> + pdata->mode_config.dac_2 =
> + of_property_read_bool(np, "ad-adv7343-power-mode-dac-2");
> +
> + pdata->mode_config.dac_3 =
> + of_property_read_bool(np, "ad-adv7343-power-mode-dac-3");
> +
> + pdata->mode_config.dac_4 =
> + of_property_read_bool(np, "ad-adv7343-power-mode-dac-4");
> +
> + pdata->mode_config.dac_5 =
> + of_property_read_bool(np, "ad-adv7343-power-mode-dac-5");
> +
> + pdata->mode_config.dac_6 =
> + of_property_read_bool(np, "ad-adv7343-power-mode-dac-6");
Looks like you transformed the platform data structure directly into device
tree properties, which in most cases is a wrong approach. I wonder how these
properties are related to actual hardware architecture and if there are no
more hardware specific properties from which these DAC power modes could be
derived.
If you need to always configure all DACs, wouldn't an array property be a
better option ?
> + pdata->sd_config.sd_dac_out1 =
> + of_property_read_bool(np, "ad-adv7343-sd-config-dac-out-1");
> +
> + pdata->sd_config.sd_dac_out2 =
> + of_property_read_bool(np, "ad-adv7343-sd-config-dac-out-2");
> +
> + decoder->pdata = pdata;
> + }
> +}
Thanks,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
