On Wed, May 29, 2013 at 10:41:18PM +0200, Jon Arne Jørgensen wrote:
> Implement i2c_board_info.platform_data handling in the driver so we can
> make device specific changes to the chips we support.
>
> Signed-off-by: Jon Arne Jørgensen <jona...@jonarne.no>
> ---
> drivers/media/i2c/saa7115.c | 62 +++++++++++++++++++++++--
> include/media/saa7115.h | 109
> ++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 166 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c
> index ccfaac9..8e915c7 100644
> --- a/drivers/media/i2c/saa7115.c
> +++ b/drivers/media/i2c/saa7115.c
> @@ -228,7 +228,7 @@ static const unsigned char saa7113_init[] = {
> R_05_INPUT_CNTL_4, 0x00,
> R_06_H_SYNC_START, 0xe9,
> R_07_H_SYNC_STOP, 0x0d,
> - R_08_SYNC_CNTL, 0x98,
> + R_08_SYNC_CNTL, SAA7113_R08_DEFAULT,
> R_09_LUMA_CNTL, 0x01,
> R_0A_LUMA_BRIGHT_CNTL, 0x80,
> R_0B_LUMA_CONTRAST_CNTL, 0x47,
> @@ -236,11 +236,10 @@ static const unsigned char saa7113_init[] = {
> R_0D_CHROMA_HUE_CNTL, 0x00,
> R_0E_CHROMA_CNTL_1, 0x01,
> R_0F_CHROMA_GAIN_CNTL, 0x2a,
> - R_10_CHROMA_CNTL_2, 0x00,
> + R_10_CHROMA_CNTL_2, SAA7113_R10_DEFAULT,
> R_11_MODE_DELAY_CNTL, 0x0c,
> - R_12_RT_SIGNAL_CNTL, 0x01,
> - R_13_RT_X_PORT_OUT_CNTL, 0x00,
> - R_14_ANAL_ADC_COMPAT_CNTL, 0x00, /* RESERVED */
> + R_12_RT_SIGNAL_CNTL, SAA7113_R12_DEFAULT,
> + R_13_RT_X_PORT_OUT_CNTL, SAA7113_R13_DEFAULT,
> R_15_VGATE_START_FID_CHG, 0x00,
> R_16_VGATE_STOP, 0x00,
> R_17_MISC_VGATE_CONF_AND_MSB, 0x00,
> @@ -1583,6 +1582,53 @@ static const struct v4l2_subdev_ops saa711x_ops = {
>
> /* ----------------------------------------------------------------------- */
>
> +static void saa7115_load_platform_data(struct saa711x_state *state,
> + struct saa7115_platform_data *data)
> +{
> + struct v4l2_subdev *sd = &state->sd;
> + u8 work;
> +
> + switch (state->ident) {
> + case V4L2_IDENT_GM7113C:
> + if (data->saa7113_r08_htc !=
> + (SAA7113_R08_DEFAULT & SAA7113_R08_HTC_MASK)) {
> + work = saa711x_read(sd, R_08_SYNC_CNTL);
> + saa711x_write(sd, R_08_SYNC_CNTL, (work & 0xe7) |
> + (data->saa7113_r08_htc << 3));
> + }
> + if (data->saa7113_r10_ofts !=
> + (SAA7113_R10_DEFAULT & SAA7113_R10_OFTS_MASK)) {
> + work = saa711x_read(sd, R_10_CHROMA_CNTL_2);
> + saa711x_write(sd, R_10_CHROMA_CNTL_2, (work & 0x3f) |
> + (data->saa7113_r10_ofts << 6));
> + }
> + if (data->saa7113_r10_vrln !=
> + (SAA7113_R10_DEFAULT & SAA7113_R10_VRLN_MASK)) {
> + work = saa711x_read(sd, R_10_CHROMA_CNTL_2);
> + saa711x_write(sd, R_10_CHROMA_CNTL_2, (work & 0xf7) |
> + (1 << 3));
> + }
> + if (data->saa7113_r12_rts0 !=
> + (SAA7113_R12_DEFAULT & SAA7113_R12_RTS0_MASK)) {
> + work = saa711x_read(sd, R_12_RT_SIGNAL_CNTL);
> + saa711x_write(sd, R_12_RT_SIGNAL_CNTL, (work & 0xf0) |
> + data->saa7113_r12_rts0);
> + }
> + if (data->saa7113_r12_rts1 !=
> + (SAA7113_R12_DEFAULT & SAA7113_R12_RTS1_MASK)) {
> + work = saa711x_read(sd, R_12_RT_SIGNAL_CNTL);
> + saa711x_write(sd, R_12_RT_SIGNAL_CNTL, (work & 0x0f) |
> + (data->saa7113_r12_rts1 << 4));
> + }
> + if (data->saa7113_r13_adlsb !=
> + (SAA7113_R13_DEFAULT & SAA7113_R13_ADLSB_MASK)) {
> + work = saa711x_read(sd, R_13_RT_X_PORT_OUT_CNTL);
> + saa711x_write(sd, R_13_RT_X_PORT_OUT_CNTL,
> + (work & 0x7f) | (1 << 7));
> + }
> + }
> +}
> +
I've made some grave mistakes here.
Will fix and repost.
> /**
> * saa711x_detect_chip - Detects the saa711x (or clone) variant
> * @client: I2C client structure.
> @@ -1769,6 +1815,12 @@ static int saa711x_probe(struct i2c_client *client,
> }
> if (state->ident > V4L2_IDENT_SAA7111A)
> saa711x_writeregs(sd, saa7115_init_misc);
> +
> + if (client->dev.platform_data) {
> + struct saa7115_platform_data *data = client->dev.platform_data;
> + saa7115_load_platform_data(state, data);
> + }
> +
> saa711x_set_v4lstd(sd, V4L2_STD_NTSC);
> v4l2_ctrl_handler_setup(hdl);
>
> diff --git a/include/media/saa7115.h b/include/media/saa7115.h
> index 4079186..7bb4a11 100644
> --- a/include/media/saa7115.h
> +++ b/include/media/saa7115.h
> @@ -64,5 +64,114 @@
> #define SAA7115_FREQ_FL_APLL (1 << 2) /* SA 3A[3], APLL, SAA7114/5
> only */
> #define SAA7115_FREQ_FL_DOUBLE_ASCLK (1 << 3) /* SA 39, LRDIV, SAA7114/5
> only */
>
> +/* SAA7113 (and GM7113) Register settings */
> +/* Vertical noise reduction */
> +#define SAA7113_R08_VNOI_NORMAL (0x0 << 0)
> +#define SAA7113_R08_VNOI_FAST (0x1 << 0)
> +#define SAA7113_R08_VNOI_FREE (0x2 << 0) /* NOTE: AUFD must be
> disabled */
> +#define SAA7113_R08_VNOI_BYPS (0x3 << 0)
> +/* Horizontal PLL */
> +#define SAA7113_R08_PLL_CLOSED (0x0 << 2)
> +#define SAA7113_R08_PLL_OPEN (0x1 << 2) /* Horizontal freq. fixed */
> +/* Horizontal time constant */
> +#define SAA7113_R08_HTC_TV (0x0 << 3)
> +#define SAA7113_R08_HTC_VTR (0x1 << 3)
> +#define SAA7113_R08_HTC_FLM (0x3 << 3) /* Fast locking mode */
> +#define SAA7113_R08_HTC_MASK (0x3 << 3)
> +/* Forced ODD/EVEN toggle FOET */
> +#define SAA7113_R08_FOET_INTERLACED (0x0 << 5)
> +#define SAA7113_R08_FOET_FORCE (0x1 << 5)
> +/* Field selection FSEL */
> +#define SAA7113_R08_FSEL_50HZ_625 (0x0 << 6)
> +#define SAA7113_R08_FSEL_60HZ_525 (0x1 << 6)
> +/* Automatic field detection AUFD */
> +#define SAA7113_R08_AUFD_DISABLE (0x0 << 7)
> +#define SAA7113_R08_AUFD_ENABLE (0x1 << 7)
> +
> +/* Luminance delay compensation */
> +#define SAA7113_R10_YDEL_MASK 0x7
> +/* VRLN Pulse position and length */
> +#define SAA7113_R10_VRLN_240_286 (0x0 << 3)
> +#define SAA7113_R10_VRLN_242_288 (0x1 << 3)
> +#define SAA7113_R10_VRLN_MASK (0x1 << 3)
> +/* Fine position of HS */
> +#define SAA7113_R10_HDEL_MASK (0x3 << 4)
> +/* Output format selection */
> +#define SAA7113_R10_OFTS_ITU656 (0x0 << 6)
> +#define SAA7113_R10_OFTS_VREF (0x1 << 6)
> +#define SAA7113_R10_OFTS_DATA_TYPE (0x2 << 6)
> +#define SAA7113_R10_OFTS_MASK (0x3 << 6)
> +
> +/* RTS0/1 Output control */
> +#define SAA7113_R12_RTS0_ADC_LSB (0x1 << 0)
> +#define SAA7113_R12_RTS0_GPSW0 (0x2 << 0)
> +#define SAA7113_R12_RTS0_HL (0x3 << 0)
> +#define SAA7113_R12_RTS0_VL (0x4 << 0)
> +#define SAA7113_R12_RTS0_DL (0x5 << 0)
> +#define SAA7113_R12_RTS0_PLIN (0x6 << 0)
> +#define SAA7113_R12_RTS0_HREF_HS (0x7 << 0)
> +#define SAA7113_R12_RTS0_HS (0x8 << 0)
> +#define SAA7113_R12_RTS0_HQ (0x9 << 0)
> +#define SAA7113_R12_RTS0_ODD (0xa << 0)
> +#define SAA7113_R12_RTS0_VS (0xb << 0)
> +#define SAA7113_R12_RTS0_V123 (0xc << 0)
> +#define SAA7113_R12_RTS0_VGATE (0xd << 0)
> +#define SAA7113_R12_RTS0_VREF (0xe << 0)
> +#define SAA7113_R12_RTS0_FID (0xf << 0)
> +#define SAA7113_R12_RTS0_MASK (0xf << 0)
> +#define SAA7113_R12_RTS1_ADC_LSB (0x1 << 4)
> +#define SAA7113_R12_RTS1_GPSW1 (0x2 << 4)
> +#define SAA7113_R12_RTS1_HL (0x3 << 4)
> +#define SAA7113_R12_RTS1_VL (0x4 << 4)
> +#define SAA7113_R12_RTS1_DL (0x5 << 4)
> +#define SAA7113_R12_RTS1_PLIN (0x6 << 4)
> +#define SAA7113_R12_RTS1_HREF_HS (0x7 << 4)
> +#define SAA7113_R12_RTS1_HS (0x8 << 4)
> +#define SAA7113_R12_RTS1_HQ (0x9 << 4)
> +#define SAA7113_R12_RTS1_ODD (0xa << 4)
> +#define SAA7113_R12_RTS1_VS (0xb << 4)
> +#define SAA7113_R12_RTS1_V123 (0xc << 4)
> +#define SAA7113_R12_RTS1_VGATE (0xd << 4)
> +#define SAA7113_R12_RTS1_VREF (0xe << 4)
> +#define SAA7113_R12_RTS1_FID (0xf << 4)
> +#define SAA7113_R12_RTS1_MASK (0xf << 4)
> +
> +/* Analog test select */
> +#define SAA7113_R13_AOSL_ITP1 (0x0 << 0)
> +#define SAA7113_R13_AOSL_AD1 (0x1 << 0)
> +#define SAA7113_R13_AOSL_AD2 (0x2 << 0)
> +#define SAA7113_R13_AOSL_ITP2 (0x3 << 0)
> +/* Field ID polarity */
> +#define SAA7113_R13_FIDP_DEFAULT (0x0 << 3)
> +#define SAA7113_R13_FIDP_INVERTED (0x1 << 3)
> +/* Status byte functionality */
> +#define SAA7113_R13_OLDSB_DEFAUL (0x0 << 4)
> +#define SAA7113_R13_OLDSB_COMPAT (0x1 << 4)
> +/* Analog-to-digital converter output bits on VPO7 to VPO0 in bypass mode */
> +#define SAA7113_R13_ADLSB_MSB (0x0 << 7)
> +#define SAA7113_R13_ADLSB_LSB (0x1 << 7)
> +#define SAA7113_R13_ADLSB_MASK (0x1 << 7)
> +
> +
> +/* Defaults according to datasheet */
> +#define SAA7113_R08_DEFAULT (SAA7113_R08_AUFD_ENABLE | \
> + SAA7113_R08_HTC_FLM)
> +#define SAA7113_R10_DEFAULT 0x0
> +#define SAA7113_R12_DEFAULT SAA7113_R12_RTS0_ADC_LSB
> +#define SAA7113_R13_DEFAULT 0x0
> +
> +struct saa7115_platform_data {
> + /* Horizontal time constant */
> + u8 saa7113_r08_htc;
> +
> + u8 saa7113_r10_vrln;
> + u8 saa7113_r10_ofts;
> +
> + u8 saa7113_r12_rts0;
> + u8 saa7113_r12_rts1;
> +
> + u8 saa7113_r13_adlsb;
> +};
> +
> #endif
>
> --
> 1.8.2.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
