On Friday, June 28, 2013 2:58 PM, Kishon Vijay Abraham I wrote:
>
> Hi,
>
> On Friday 28 June 2013 10:54 AM, Jingoo Han wrote:
> > Use the generic PHY API instead of the platform callback to control
> > the DP PHY. The 'phy_label' field is added to the platform data
> > structure to allow PHY lookup on non-dt platforms.
> >
> > Signed-off-by: Jingoo Han <jg1....@samsung.com>
> > ---
> > .../devicetree/bindings/video/exynos_dp.txt | 17 ---
> > drivers/video/exynos/exynos_dp_core.c | 118
> > ++------------------
> > drivers/video/exynos/exynos_dp_core.h | 2 +
> > include/video/exynos_dp.h | 6 +-
> > 4 files changed, 15 insertions(+), 128 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt
> b/Documentation/devicetree/bindings/video/exynos_dp.txt
> > index 84f10c1..a8320e3 100644
> > --- a/Documentation/devicetree/bindings/video/exynos_dp.txt
> > +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
> > @@ -1,17 +1,6 @@
> > The Exynos display port interface should be configured based on
> > the type of panel connected to it.
> >
> > -We use two nodes:
> > - -dp-controller node
> > - -dptx-phy node(defined inside dp-controller node)
> > -
> > -For the DP-PHY initialization, we use the dptx-phy node.
> > -Required properties for dptx-phy:
> > - -reg:
> > - Base address of DP PHY register.
> > - -samsung,enable-mask:
> > - The bit-mask used to enable/disable DP PHY.
> > -
> > For the Panel initialization, we read data from dp-controller node.
> > Required properties for dp-controller:
> > -compatible:
> > @@ -67,12 +56,6 @@ SOC specific portion:
> > interrupt-parent = <&combiner>;
> > clocks = <&clock 342>;
> > clock-names = "dp";
> > -
> > - dptx-phy {
> > - reg = <0x10040720>;
> > - samsung,enable-mask = <1>;
> > - };
> > -
> > };
> >
> > Board Specific portion:
> > diff --git a/drivers/video/exynos/exynos_dp_core.c
> > b/drivers/video/exynos/exynos_dp_core.c
> > index 12bbede..bac515b 100644
> > --- a/drivers/video/exynos/exynos_dp_core.c
> > +++ b/drivers/video/exynos/exynos_dp_core.c
> > @@ -19,6 +19,7 @@
> > #include <linux/interrupt.h>
> > #include <linux/delay.h>
> > #include <linux/of.h>
> > +#include <linux/phy/phy.h>
> >
> > #include <video/exynos_dp.h>
> >
> > @@ -960,84 +961,15 @@ static struct exynos_dp_platdata
> > *exynos_dp_dt_parse_pdata(struct device *dev)
> > return ERR_PTR(-EINVAL);
> > }
> >
> > - return pd;
> > -}
> > -
> > -static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp)
> > -{
> > - struct device_node *dp_phy_node = of_node_get(dp->dev->of_node);
> > - u32 phy_base;
> > - int ret = 0;
> > -
> > - dp_phy_node = of_find_node_by_name(dp_phy_node, "dptx-phy");
> > - if (!dp_phy_node) {
> > - dev_err(dp->dev, "could not find dptx-phy node\n");
> > - return -ENODEV;
> > - }
> > -
> > - if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) {
> > - dev_err(dp->dev, "failed to get reg for dptx-phy\n");
> > - ret = -EINVAL;
> > - goto err;
> > - }
> > -
> > - if (of_property_read_u32(dp_phy_node, "samsung,enable-mask",
> > - &dp->enable_mask)) {
> > - dev_err(dp->dev, "failed to get enable-mask for dptx-phy\n");
> > - ret = -EINVAL;
> > - goto err;
> > - }
> > -
> > - dp->phy_addr = ioremap(phy_base, SZ_4);
> > - if (!dp->phy_addr) {
> > - dev_err(dp->dev, "failed to ioremap dp-phy\n");
> > - ret = -ENOMEM;
> > - goto err;
> > - }
> > -
> > -err:
> > - of_node_put(dp_phy_node);
> > -
> > - return ret;
> > -}
> > -
> > -static void exynos_dp_phy_init(struct exynos_dp_device *dp)
> > -{
> > - u32 reg;
> > -
> > - reg = __raw_readl(dp->phy_addr);
> > - reg |= dp->enable_mask;
> > - __raw_writel(reg, dp->phy_addr);
> > -}
> > -
> > -static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
> > -{
> > - u32 reg;
> > + pd->phy_label = "dp";
>
> In the case of non-dt boot, this phy_label should have ideally come from
> platform code.
No, this is NOT the case of non-dt.
'pd->phy_label = "dp";' is included in exynos_dp_dt_parse_pdata(),
not exynos_dp_phy_exit().
Also, exynos_dp_dt_parse_pdata() is called in the case of dt.
But, diff is a little bit confusing. :(
Best regards,
Jingoo Han
>
> Thanks
> Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
