Hi Sylwester,
Thanks for the thorough review.
On 06/27/2013 05:57 PM, Sylwester Nawrocki wrote:
> Hi Andrzej,
>
> On 06/05/2013 01:44 PM, Andrzej Hajda wrote:
>> Driver for Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor
>> with embedded SoC ISP.
>> The driver exposes the sensor as two V4L2 subdevices:
>> - S5K5BAF-CIS - pure CMOS Image Sensor, fixed 1600x1200 format,
>> no controls.
>> - S5K5BAF-ISP - Image Signal Processor, formats up to 1600x1200,
>> pre/post ISP cropping, downscaling via selection API, controls.
>>
>> Signed-off-by: Sylwester Nawrocki <s.nawro...@samsung.com>
>> Signed-off-by: Andrzej Hajda <a.ha...@samsung.com>
>> Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
>> ---
>> v3:
>> - narrowed state->error usage to i2c and power errors,
> Hmm, there still seems to be quite a few functions that use state->error
> and IMHO it would be better if those just return the result directly.
> How about changing at least these:
>
> static void s5k5baf_check_fw_revision(struct s5k5baf *state)
> static void s5k5baf_hw_set_video_bus(struct s5k5baf *state)
> static void s5k5baf_power_on(struct s5k5baf *state)
> static void s5k5baf_power_off(struct s5k5baf *state)
> static void s5k5baf_hw_set_crop_rects(struct s5k5baf *state)
>
> to return result directly ?
I see no good reason in complicating those functions and their callers,
beside positive review :) OK I see some reasons, but it still does not
convince me.
Maybe I should present the idea of state->error 'pattern' in separate RFC
to attract broader audience and eventually get public acceptance or
eternal damnation :)
Anyway I will convert those functions to the 'classic' form in next
patch version,
but my heart is bleeding :)
> Personally I would also convert functins used in s5k5baf_s_ctrl()
> handler:
> s5k5baf_hw_set_awb()
> s5k5baf_hw_set_colorfx()
> s5k5baf_hw_set_auto_exposure()
> s5k5baf_hw_set_mirror()
> s5k5baf_hw_set_anti_flicker()
> s5k5baf_hw_set_test_pattern()
>
> And have state->err cleared at beginning of s5k5baf_s_ctrl().
> But I'll probably not complain if those are left as they are. :)
>
>> - private gain controls replaced by red/blue balance user controls,
>> - added checks to devicetree gpio node parsing
>>
>> v2:
>> - lower-cased driver name,
>> - removed underscore from regulator names,
>> - removed platform data code,
>> - v4l controls grouped in anonymous structs,
>> - added s5k5baf_clear_error function,
>> - private controls definitions moved to uapi header file,
>> - added v4l2-controls.h reservation for private controls,
>> - corrected subdev registered/unregistered code,
>> - .log_status sudbev op set to v4l2 helper,
>> - moved entity link creation to probe routines,
>> - added cleanup on error to probe function.
>> ---
>> .../devicetree/bindings/media/samsung-s5k5baf.txt | 53 +
>> MAINTAINERS | 7 +
>> drivers/media/i2c/Kconfig | 7 +
>> drivers/media/i2c/Makefile | 1 +
>> drivers/media/i2c/s5k5baf.c | 1979
>> ++++++++++++++++++++
>> 5 files changed, 2047 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
>> create mode 100644 drivers/media/i2c/s5k5baf.c
>>
>> diff --git a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
>> b/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
>> new file mode 100644
>> index 0000000..0e46743
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
>> @@ -0,0 +1,53 @@
>> +Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP
>> +-------------------------------------------------------------
>> +
>> +Required properties:
>> +
>> +- compatible : "samsung,s5k5baf";
>> +- reg : i2c slave address of the sensor;
> i2c should be capitalized.
OK
>
> [...]
>> +/* Auto-algorithms enable mask */
>> +#define REG_DBG_AUTOALG_EN 0x03f8
>> +#define AALG_ALL_EN BIT(0)
>> +#define AALG_AE_EN BIT(1)
>> +#define AALG_DIVLEI_EN BIT(2)
>> +#define AALG_WB_EN BIT(3)
>> +#define AALG_USE_WB_FOR_ISP BIT(4)
>> +#define AALG_FLICKER_EN BIT(5)
>> +#define AALG_FIT_EN BIT(6)
>> +#define AALG_WRHW_EN BIT(7)
> Perhaps some comment on what the below definitions refer to ?
OK
>
>> +#define REG_PTR_CCM_HORIZON 0x06d0
>> +#define REG_PTR_CCM_INCANDESCENT 0x06d4
>> +#define REG_PTR_CCM_WARM_WHITE 0x06d8
>> +#define REG_PTR_CCM_COOL_WHITE 0x06dc
>> +#define REG_PTR_CCM_DL50 0x06e0
>> +#define REG_PTR_CCM_DL65 0x06e4
>> +#define REG_PTR_CCM_OUTDOOR 0x06ec
>> +
>> +#define REG_ARR_CCM(n) (0x2800 + 36 * (n))
>> +
> [...]
>> +struct s5k5baf_ctrls {
>> + struct v4l2_ctrl_handler handler;
>> + struct { /* Auto / manual white balance cluster */
>> + struct v4l2_ctrl *awb;
>> + struct v4l2_ctrl *gain_red;
>> + struct v4l2_ctrl *gain_blue;
>> + };
>> + struct { /* Mirror cluster */
>> + struct v4l2_ctrl *hflip;
>> + struct v4l2_ctrl *vflip;
>> + };
>> + struct { /* Auto exposure / manual exposure and gain cluster */
>> + struct v4l2_ctrl *auto_exp;
>> + struct v4l2_ctrl *exposure;
>> + struct v4l2_ctrl *gain;
>> + };
>> +};
>> +
>> +struct s5k5baf {
>> + u32 mclk_frequency;
>> + struct s5k5baf_gpio gpios[2];
> struct s5k5baf_gpio gpios[GPIO_NUM]; ?
OK
>
>> + enum v4l2_mbus_type bus_type;
>> + u8 nlanes;
>> + u8 hflip:1;
>> + u8 vflip:1;
> I would just make these 2 fields u8, no need to complicate it with
> bitfields.
OK
>
>> + struct regulator_bulk_data supplies[S5K5BAF_NUM_SUPPLIES];
>> +
>> + struct v4l2_subdev cis_sd;
>> + struct media_pad cis_pad;
>> +
>> + struct v4l2_subdev sd;
>> + struct media_pad pads[2];
>> +
>> + /* protects the struct members below */
>> + struct mutex lock;
>> +
>> + int error;
>> +
>> + struct v4l2_rect crop_sink;
>> + struct v4l2_rect compose;
>> + struct v4l2_rect crop_source;
>> + /* index to s5k5baf_formats array */
>> + int pixfmt;
>> + /* actual frame interval in 100us */
>> + u16 fiv;
>> + /* requested frame interval in 100us */
>> + u16 req_fiv;
>> +
>> + struct s5k5baf_ctrls ctrls;
>> +
>> + unsigned int streaming:1;
>> + unsigned int apply_cfg:1;
>> + unsigned int apply_crop:1;
>> + unsigned int power;
>> +};
>> +
>> +static const struct s5k5baf_pixfmt s5k5baf_formats[] = {
>> + { V4L2_MBUS_FMT_VYUY8_2X8, V4L2_COLORSPACE_JPEG, 5 },
>> + /* range 16-240 */
>> + { V4L2_MBUS_FMT_VYUY8_2X8, V4L2_COLORSPACE_REC709, 6 },
>> + { V4L2_MBUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_JPEG, 0 },
>> +};
>> +
>> +static struct v4l2_rect s5k5baf_cis_rect = { 0, 0, S5K5BAF_CIS_WIDTH,
>> + S5K5BAF_CIS_HEIGHT };
>> +static struct v4l2_rect s5k5baf_def_rect = { 0, 0, S5K5BAF_OUT_WIDTH_DEF,
>> + S5K5BAF_OUT_HEIGHT_DEF };
>> +
>> +static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl)
>> +{
>> + return &container_of(ctrl->handler, struct s5k5baf, ctrls.handler)->sd;
>> +}
>> +
>> +static inline bool s5k5baf_is_cis_subdev(struct v4l2_subdev *sd)
>> +{
>> + return sd->entity.type == MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;
>> +}
>> +
>> +static inline struct s5k5baf *to_s5k5baf(struct v4l2_subdev *sd)
>> +{
>> + if (s5k5baf_is_cis_subdev(sd))
>> + return container_of(sd, struct s5k5baf, cis_sd);
>> + else
>> + return container_of(sd, struct s5k5baf, sd);
>> +}
>> +
>> +static u16 s5k5baf_i2c_read(struct s5k5baf *state, u16 addr)
>> +{
>> + struct i2c_client *c = v4l2_get_subdevdata(&state->sd);
>> + u16 w, r;
>> + struct i2c_msg msg[] = {
>> + {.addr = c->addr, .flags = 0, .len = 2, .buf = (u8 *)&w},
>> + {.addr = c->addr, .flags = I2C_M_RD, .len = 2, .buf = (u8 *)&r},
>> + };
>> + int ret;
>> +
>> + if (state->error)
>> + return 0;
>> +
>> + w = htons(addr);
>> + ret = i2c_transfer(c->adapter, msg, 2);
>> + r = ntohs(r);
>> +
>> + v4l2_dbg(3, debug, c, "i2c_read: 0x%04x : 0x%04x\n", addr, r);
>> +
>> + if (ret != 2) {
>> + v4l2_err(c, "i2c_read: error during transfer (%d)\n", ret);
>> + state->error = ret;
>> + }
>> + return r;
>> +}
>> +
>> +static void s5k5baf_i2c_write(struct s5k5baf *state, u16 addr, u16 val)
>> +{
>> + u8 buf[4] = { addr >> 8, addr & 0xFF, val >> 8, val & 0xFF };
>> + struct i2c_client *c = v4l2_get_subdevdata(&state->sd);
>> + int ret;
>> +
>> + if (state->error)
>> + return;
>> +
>> + ret = i2c_master_send(c, buf, 4);
>> + v4l2_dbg(3, debug, c, "i2c_write: 0x%04x : 0x%04x\n", addr, val);
>> +
>> + if (ret != 4) {
>> + v4l2_err(c, "i2c_write: error during transfer (%d)\n", ret);
>> + state->error = ret;
>> + }
>> +}
>> +
>> +static u16 s5k5baf_read(struct s5k5baf *state, u16 addr)
>> +{
>> + s5k5baf_i2c_write(state, REG_CMDRD_ADDR, addr);
>> + return s5k5baf_i2c_read(state, REG_CMD_BUF);
>> +}
>> +
>> +static void s5k5baf_write(struct s5k5baf *state, u16 addr, u16 val)
>> +{
>> + s5k5baf_i2c_write(state, REG_CMDWR_ADDR, addr);
>> + s5k5baf_i2c_write(state, REG_CMD_BUF, val);
>> +}
>> +
>> +static void s5k5baf_write_arr_seq(struct s5k5baf *state, u16 addr,
>> + u16 count, const u16 *seq)
>> +{
>> + struct i2c_client *c = v4l2_get_subdevdata(&state->sd);
>> + u16 buf[count + 1];
>> + int ret, n;
>> +
>> + s5k5baf_i2c_write(state, REG_CMDWR_ADDR, addr);
>> + if (state->error)
>> + return;
>> +
>> + buf[0] = __constant_htons(REG_CMD_BUF);
>> + for (n = 1; n <= count; ++n)
>> + buf[n] = htons(*seq++);
>> +
>> + n *= 2;
>> + ret = i2c_master_send(c, (char *)buf, n);
>> + v4l2_dbg(3, debug, c, "i2c_write_seq(count=%d): %*ph\n", count,
>> + min(2 * count, 64), seq - count);
>> +
>> + if (ret != n) {
>> + v4l2_err(c, "i2c_write_seq: error during transfer (%d)\n", ret);
>> + state->error = ret;
>> + }
>> +}
>> +
>> +#define s5k5baf_write_seq(state, addr, seq...) \
>> + s5k5baf_write_arr_seq(state, addr, sizeof((char[]){ seq }), \
>> + (const u16 []){ seq });
>> +
>> +/* add items count at the beginning of the list */
>> +#define NSEQ(seq...) sizeof((char[]){ seq }), seq
>> +
>> +/*
>> + * s5k5baf_write_nseq() - Writes sequences of values to sensor memory via
>> i2c
>> + * @nseq: sequence of u16 words in format:
>> + * (N, address, value[1]...value[N-1])*,0
>> + * Ex.:
>> + * u16 seq[] = { NSEQ(0x4000, 1, 1), NSEQ(0x4010, 640, 480), 0 };
>> + * ret = s5k5baf_write_nseq(c, seq);
>> + */
>> +static void s5k5baf_write_nseq(struct s5k5baf *state, const u16 *nseq)
>> +{
>> + int count;
>> +
>> + while ((count = *nseq++)) {
>> + u16 addr = *nseq++;
>> + --count;
>> +
>> + s5k5baf_write_arr_seq(state, addr, count, nseq);
>> + nseq += count;
>> + }
>> +}
>> +
>> +static void s5k5baf_synchronize(struct s5k5baf *state, int timeout, u16
>> addr)
>> +{
>> + unsigned long end = jiffies + msecs_to_jiffies(timeout);
>> + u16 reg;
>> +
>> + s5k5baf_write(state, addr, 1);
>> + do {
>> + reg = s5k5baf_read(state, addr);
>> + if (state->error || !reg)
>> + return;
>> + usleep_range(5000, 10000);
>> + } while (time_is_after_jiffies(end));
>> +
>> + v4l2_err(&state->sd, "timeout on register synchronize (%#x)\n", addr);
>> + state->error = -ETIMEDOUT;
>> +}
>> +
>> +static void s5k5baf_hw_patch(struct s5k5baf *state)
>> +{
>> + static const u16 nseq_patch[] = {
>> + NSEQ(0x1668,
>> + 0xb5fe, 0x0007, 0x683c, 0x687e, 0x1da5, 0x88a0, 0x2800, 0xd00b,
> [...]
>> + 0x0058, 0x0000),
>> + 0
>> + };
>> +
>> + s5k5baf_write_nseq(state, nseq_patch);
>> +}
>> +
>> +static void s5k5baf_hw_set_clocks(struct s5k5baf *state)
>> +{
>> + unsigned long mclk = state->mclk_frequency / 1000;
>> + u16 status;
>> + static const u16 nseq_clk_cfg[] = {
>> + NSEQ(REG_I_USE_NPVI_CLOCKS,
>> + NPVI_CLOCKS, NMIPI_CLOCKS, 0,
>> + SCLK_PVI_FREQ / 4, PCLK_MIN_FREQ / 4, PCLK_MAX_FREQ / 4,
>> + SCLK_MIPI_FREQ / 4, PCLK_MIN_FREQ / 4, PCLK_MAX_FREQ / 4),
>> + NSEQ(REG_I_USE_REGS_API, 1),
>> + 0
>> + };
>> +
>> + s5k5baf_write_seq(state, REG_I_INCLK_FREQ_L, mclk & 0xffff, mclk >> 16);
>> + s5k5baf_write_nseq(state, nseq_clk_cfg);
>> +
>> + s5k5baf_synchronize(state, 250, REG_I_INIT_PARAMS_UPDATED);
>> + status = s5k5baf_read(state, REG_I_ERROR_INFO);
>> + if (!state->error && status) {
>> + v4l2_err(&state->sd, "error configuring PLL (%d)\n", status);
>> + state->error = -EINVAL;
>> + }
>> +}
>> +
>> +static void s5k5baf_hw_set_ccm(struct s5k5baf *state)
>> +{
>> + static const u16 nseq_cfg[] = {
>> + NSEQ(REG_PTR_CCM_HORIZON,
> [...]
>> + 0
>> + };
>> + s5k5baf_write_nseq(state, nseq_cfg);
>> +}
>> +
>> +static void s5k5baf_hw_set_cis(struct s5k5baf *state)
>> +{
>> + static const u16 nseq_cfg[] = {
>> + NSEQ(0xc202, 0x0700),
> [...]
>> + 0
>> + };
>> +
>> + s5k5baf_i2c_write(state, REG_CMDWR_PAGE, PAGE_IF_HW);
>> + s5k5baf_write_nseq(state, nseq_cfg);
>> + s5k5baf_i2c_write(state, REG_CMDWR_PAGE, PAGE_IF_SW);
>> +}
>> +
>> +static void s5k5baf_hw_sync_cfg(struct s5k5baf *state)
>> +{
>> + s5k5baf_write(state, REG_G_PREV_CFG_CHG, 1);
>> + if (state->apply_crop) {
>> + s5k5baf_write(state, REG_G_INPUTS_CHANGE_REQ, 1);
>> + s5k5baf_write(state, REG_G_PREV_CFG_BYPASS_CHANGED, 1);
>> + }
>> + s5k5baf_synchronize(state, 500, REG_G_NEW_CFG_SYNC);
>> +
>> +}
>> +/* Set horizontal and vertical image flipping */
>> +static void s5k5baf_hw_set_mirror(struct s5k5baf *state, int horiz_flip)
>> +{
>> + u16 vflip = state->ctrls.vflip->val ^ state->vflip;
>> + u16 flip = (horiz_flip ^ state->hflip) | (vflip << 1);
>> +
>> + s5k5baf_write(state, REG_P_PREV_MIRROR(0), flip);
>> + if (state->streaming)
>> + s5k5baf_hw_sync_cfg(state);
>> +}
>> +
>> +/* Configure auto/manual white balance and R/G/B gains */
>> +static void s5k5baf_hw_set_awb(struct s5k5baf *state, int awb)
>> +{
>> + struct s5k5baf_ctrls *ctrls = &state->ctrls;
>> + u16 reg;
>> +
>> + reg = s5k5baf_read(state, REG_DBG_AUTOALG_EN);
>> +
>> + if (!awb)
>> + s5k5baf_write_seq(state, REG_SF_RGAIN,
>> + ctrls->gain_red->val, 1,
>> + S5K5BAF_GAIN_GREEN_DEF, 1,
>> + ctrls->gain_blue->val, 1,
>> + 1);
>> + reg = awb ? reg | AALG_WB_EN : reg & ~AALG_WB_EN;
>> + s5k5baf_write(state, REG_DBG_AUTOALG_EN, reg);
>> +}
>> +
>> +/* Program FW with exposure time, 'exposure' in us units */
>> +static void s5k5baf_hw_set_user_exposure(struct s5k5baf *state, int
>> exposure)
>> +{
>> + unsigned int time = exposure / 10;
>> +
>> + s5k5baf_write_seq(state, REG_SF_USR_EXPOSURE_L,
>> + time & 0xffff, time >> 16, 1);
>> +}
>> +
>> +static void s5k5baf_hw_set_user_gain(struct s5k5baf *state, int gain)
>> +{
>> + s5k5baf_write_seq(state, REG_SF_USR_TOT_GAIN, gain, 1);
>> +}
>> +
>> +/* Set auto/manual exposure and total gain */
>> +static void s5k5baf_hw_set_auto_exposure(struct s5k5baf *state, int value)
>> +{
>> + unsigned int exp_time = state->ctrls.exposure->val;
>> + u16 auto_alg;
>> +
>> + auto_alg = s5k5baf_read(state, REG_DBG_AUTOALG_EN);
>> +
>> + if (value == V4L2_EXPOSURE_AUTO) {
>> + auto_alg |= AALG_AE_EN | AALG_DIVLEI_EN;
>> + } else {
>> + s5k5baf_hw_set_user_exposure(state, exp_time);
>> + s5k5baf_hw_set_user_gain(state, state->ctrls.gain->val);
>> + auto_alg &= ~(AALG_AE_EN | AALG_DIVLEI_EN);
>> + }
>> +
>> + s5k5baf_write(state, REG_DBG_AUTOALG_EN, auto_alg);
>> +}
>> +
>> +static void s5k5baf_hw_set_anti_flicker(struct s5k5baf *state, int v)
>> +{
>> + u16 auto_alg;
>> +
>> + auto_alg = s5k5baf_read(state, REG_DBG_AUTOALG_EN);
>> +
>> + if (v == V4L2_CID_POWER_LINE_FREQUENCY_AUTO) {
>> + auto_alg |= AALG_FLICKER_EN;
>> + } else {
>> + auto_alg &= ~AALG_FLICKER_EN;
>> + /* The V4L2_CID_LINE_FREQUENCY control values match
>> + * the register values */
>> + s5k5baf_write_seq(state, REG_SF_FLICKER_QUANT, v, 1);
>> + }
>> +
>> + s5k5baf_write(state, REG_DBG_AUTOALG_EN, auto_alg);
>> +}
>> +
>> +static void s5k5baf_hw_set_colorfx(struct s5k5baf *state, int val)
>> +{
>> + static const u16 colorfx[] = {
>> + [V4L2_COLORFX_NONE] = 0,
>> + [V4L2_COLORFX_BW] = 1,
>> + [V4L2_COLORFX_NEGATIVE] = 2,
>> + [V4L2_COLORFX_SEPIA] = 3,
>> + [V4L2_COLORFX_SKY_BLUE] = 4,
>> + [V4L2_COLORFX_SKETCH] = 5,
>> + };
>> +
>> + if (val >= ARRAY_SIZE(colorfx)) {
>> + v4l2_err(&state->sd, "colorfx(%d) out of range(%d)\n",
>> + val, ARRAY_SIZE(colorfx));
>> + state->error = -EINVAL;
>> + } else {
>> + s5k5baf_write(state, REG_G_SPEC_EFFECTS, colorfx[val]);
>> + }
>> +}
>> +
>> +static int s5k5baf_find_pixfmt(struct v4l2_mbus_framefmt *mf)
>> +{
>> + int i, c = -1;
>> +
>> + for (i = 0; i < ARRAY_SIZE(s5k5baf_formats); i++) {
>> + if (mf->colorspace != s5k5baf_formats[i].colorspace)
>> + continue;
>> + if (mf->code == s5k5baf_formats[i].code)
>> + return i;
>> + if (c < 0)
>> + c = i;
>> + }
>> + return (c < 0) ? 0 : c;
>> +}
>> +
>> +static void s5k5baf_hw_set_video_bus(struct s5k5baf *state)
>> +{
>> + u16 en_packets;
>> +
>> + switch (state->bus_type) {
>> + case V4L2_MBUS_CSI2:
>> + en_packets = EN_PACKETS_CSI2;
>> + break;
>> + case V4L2_MBUS_PARALLEL:
>> + en_packets = 0;
>> + break;
>> + default:
>> + v4l2_err(&state->sd, "unknown video bus: %d\n",
>> state->bus_type);
>> + state->error = -EINVAL;
>> + return;
>> + };
>> +
>> + s5k5baf_write_seq(state, REG_OIF_EN_MIPI_LANES,
>> + state->nlanes, en_packets, 1);
>> +}
>> +
>> +static u16 s5k5baf_get_cfg_error(struct s5k5baf *state)
>> +{
>> + u16 err = s5k5baf_read(state, REG_G_PREV_CFG_ERROR);
>> + if (err)
>> + s5k5baf_write(state, REG_G_PREV_CFG_ERROR, 0);
>> + return err;
>> +}
>> +
>> +static void s5k5baf_hw_set_fiv(struct s5k5baf *state, u16 fiv)
>> +{
>> + s5k5baf_write(state, REG_P_MAX_FR_TIME(0), fiv);
>> + s5k5baf_hw_sync_cfg(state);
>> +}
>> +
>> +static void s5k5baf_hw_find_min_fiv(struct s5k5baf *state)
>> +{
>> + u16 err, fiv;
>> + int n;
>> +
>> + fiv = s5k5baf_read(state, REG_G_ACTUAL_P_FR_TIME);
>> + if (state->error)
>> + return;
>> +
>> + for (n = 5; n > 0; --n) {
>> + s5k5baf_hw_set_fiv(state, fiv);
>> + err = s5k5baf_get_cfg_error(state);
>> + if (state->error)
>> + return;
>> + switch (err) {
>> + case CFG_ERROR_RANGE:
>> + ++fiv;
>> + break;
>> + case 0:
>> + state->fiv = fiv;
>> + v4l2_info(&state->sd,
>> + "found valid frame interval: %d00us\n", fiv);
>> + return;
>> + default:
>> + v4l2_err(&state->sd,
>> + "error setting frame interval: %d\n", err);
>> + state->error = -EINVAL;
>> + }
>> + };
>> + v4l2_err(&state->sd, "cannot find correct frame interval\n");
>> + state->error = -ERANGE;
>> +}
>> +
>> +static void s5k5baf_hw_validate_cfg(struct s5k5baf *state)
>> +{
>> + u16 err;
>> +
>> + err = s5k5baf_get_cfg_error(state);
>> + if (state->error)
>> + return;
>> +
>> + switch (err) {
>> + case 0:
>> + state->apply_cfg = 1;
>> + return;
>> + case CFG_ERROR_RANGE:
>> + s5k5baf_hw_find_min_fiv(state);
>> + if (!state->error)
>> + state->apply_cfg = 1;
>> + return;
>> + default:
>> + v4l2_err(&state->sd,
>> + "error setting format: %d\n", err);
>> + state->error = -EINVAL;
>> + }
>> +}
>> +
>> +static void s5k5baf_rescale(struct v4l2_rect *r, const struct v4l2_rect *v,
>> + const struct v4l2_rect *n,
>> + const struct v4l2_rect *d)
>> +{
>> + r->left = v->left * n->width / d->width;
>> + r->top = v->top * n->height / d->height;
>> + r->width = v->width * n->width / d->width;
>> + r->height = v->height * n->height / d->height;
>> +}
>> +
>> +static void s5k5baf_hw_set_crop_rects(struct s5k5baf *state)
>> +{
>> + struct v4l2_rect *p, r;
>> + u16 err;
>> +
>> + p = &state->crop_sink;
>> + s5k5baf_write_seq(state, REG_G_PREVREQ_IN_WIDTH, p->width, p->height,
>> + p->left, p->top);
>> +
>> + s5k5baf_rescale(&r, &state->crop_source, &state->crop_sink,
>> + &state->compose);
>> + s5k5baf_write_seq(state, REG_G_PREVZOOM_IN_WIDTH, r.width, r.height,
>> + r.left, r.top);
>> +
>> + s5k5baf_synchronize(state, 500, REG_G_INPUTS_CHANGE_REQ);
>> + s5k5baf_synchronize(state, 500, REG_G_PREV_CFG_BYPASS_CHANGED);
>> + err = s5k5baf_get_cfg_error(state);
>> + if (state->error)
>> + return;
>> +
>> + switch (err) {
>> + case 0:
>> + break;
>> + case CFG_ERROR_RANGE:
>> + /* retry crop with frame interval set to max */
>> + s5k5baf_hw_set_fiv(state, S5K5BAF_MAX_FR_TIME);
>> + err = s5k5baf_get_cfg_error(state);
>> + if (state->error)
>> + return;
>> + if (err) {
>> + v4l2_err(&state->sd,
>> + "crop error on max frame interval: %d\n", err);
>> + state->error = -EINVAL;
>> + }
>> + s5k5baf_hw_set_fiv(state, state->req_fiv);
>> + s5k5baf_hw_validate_cfg(state);
>> + break;
>> + default:
>> + v4l2_err(&state->sd, "crop error: %d\n", err);
>> + state->error = -EINVAL;
>> + return;
>> + }
>> +
>> + if (!state->apply_cfg)
>> + return;
>> +
>> + p = &state->crop_source;
>> + s5k5baf_write_seq(state, REG_P_OUT_WIDTH(0), p->width, p->height);
>> + s5k5baf_hw_set_fiv(state, state->req_fiv);
>> + s5k5baf_hw_validate_cfg(state);
>> +}
>> +
>> +static void s5k5baf_hw_set_config(struct s5k5baf *state)
>> +{
>> + u16 reg_fmt = s5k5baf_formats[state->pixfmt].reg_p_fmt;
>> + struct v4l2_rect *r = &state->crop_source;
>> +
>> + s5k5baf_write_seq(state, REG_P_OUT_WIDTH(0),
>> + r->width, r->height, reg_fmt,
>> + PCLK_MAX_FREQ >> 2, PCLK_MIN_FREQ >> 2,
>> + PVI_MASK_MIPI, CLK_MIPI_INDEX,
>> + FR_RATE_FIXED, FR_RATE_Q_DYNAMIC,
>> + state->req_fiv, S5K5BAF_MIN_FR_TIME);
>> + s5k5baf_hw_sync_cfg(state);
>> + s5k5baf_hw_validate_cfg(state);
>> +}
>> +
>> +
>> +static void s5k5baf_hw_set_test_pattern(struct s5k5baf *state, int id)
>> +{
>> + s5k5baf_i2c_write(state, REG_PATTERN_WIDTH, 800);
>> + s5k5baf_i2c_write(state, REG_PATTERN_HEIGHT, 511);
>> + s5k5baf_i2c_write(state, REG_PATTERN_PARAM, 0);
>> + s5k5baf_i2c_write(state, REG_PATTERN_SET, id);
>> +}
> [...]
>> +static void s5k5baf_power_on(struct s5k5baf *state)
>> +{
>> + int ret;
>> +
>> + ret = regulator_bulk_enable(S5K5BAF_NUM_SUPPLIES, state->supplies);
>> + if (ret) {
>> + state->error = ret;
>> + return;
>> + }
>> +
>> + s5k5baf_gpio_deassert(state, STBY);
>> + usleep_range(50, 100);
>> + s5k5baf_gpio_deassert(state, RST);
>> +}
>> +
>> +static void s5k5baf_power_off(struct s5k5baf *state)
>> +{
>> + int ret;
>> +
>> + state->streaming = 0;
>> + state->apply_cfg = 0;
>> + state->apply_crop = 0;
>> + s5k5baf_gpio_assert(state, RST);
>> + s5k5baf_gpio_assert(state, STBY);
>> + ret = regulator_bulk_disable(S5K5BAF_NUM_SUPPLIES, state->supplies);
>> + if (ret && !state->error)
>> + state->error = ret;
>> +}
>> +
>> +static void s5k5baf_hw_init(struct s5k5baf *state)
>> +{
>> + s5k5baf_i2c_write(state, AHB_MSB_ADDR_PTR, PAGE_IF_HW);
>> + s5k5baf_i2c_write(state, REG_CLEAR_HOST_INT, 0);
>> + s5k5baf_i2c_write(state, REG_SW_LOAD_COMPLETE, 1);
>> + s5k5baf_i2c_write(state, REG_CMDRD_PAGE, PAGE_IF_SW);
>> + s5k5baf_i2c_write(state, REG_CMDWR_PAGE, PAGE_IF_SW);
>> +}
>> +
>> +static int s5k5baf_clear_error(struct s5k5baf *state)
>> +{
>> + int ret = state->error;
>> +
>> + state->error = 0;
>> + return ret;
>> +}
>> +
>> +/*
>> + * V4L2 subdev core and video operations
>> + */
>> +
>> +static void s5k5baf_initialize_data(struct s5k5baf *state)
>> +{
>> + state->crop_sink = s5k5baf_cis_rect;
>> + state->compose = s5k5baf_def_rect;
>> + state->crop_source = state->compose;
>> + state->pixfmt = 0;
>> + state->req_fiv = 10000 / 15;
>> + state->fiv = state->req_fiv;
>> +}
>> +
>> +static int s5k5baf_set_power(struct v4l2_subdev *sd, int on)
>> +{
>> + struct s5k5baf *state = to_s5k5baf(sd);
>> + int ret;
>> +
>> + mutex_lock(&state->lock);
>> +
>> + if (!on == state->power) {
>> + if (on) {
>> + s5k5baf_initialize_data(state);
>> + s5k5baf_power_on(state);
>> + s5k5baf_hw_init(state);
>> + s5k5baf_hw_patch(state);
>> + s5k5baf_i2c_write(state, REG_SET_HOST_INT, 1);
>> + s5k5baf_hw_set_clocks(state);
>> + s5k5baf_hw_set_video_bus(state);
>> + s5k5baf_hw_set_cis(state);
>> + s5k5baf_hw_set_ccm(state);
>> + } else {
>> + s5k5baf_power_off(state);
>> + }
>> +
>> + if (!state->error)
>> + state->power += on ? 1 : -1;
>> + }
>> +
>> + ret = s5k5baf_clear_error(state);
>> + mutex_unlock(&state->lock);
>> +
>> + if (!ret && on && state->power == 1)
>> + ret = v4l2_ctrl_handler_setup(&state->ctrls.handler);
>> +
>> + return ret;
>> +}
>> +
>> +static void s5k5baf_hw_set_stream(struct s5k5baf *state, int enable)
>> +{
>> + s5k5baf_write_seq(state, REG_G_ENABLE_PREV, enable, 1);
>> +}
>> +
>> +static int s5k5baf_s_stream(struct v4l2_subdev *sd, int on)
>> +{
>> + struct s5k5baf *state = to_s5k5baf(sd);
>> + int ret;
>> +
>> + if (state->streaming == !!on)
>> + return 0;
>> +
>> + mutex_lock(&state->lock);
>> +
>> + if (!on) {
>> + s5k5baf_hw_set_stream(state, 0);
>> + goto out;
>> + }
>> +
>> + s5k5baf_hw_set_config(state);
>> + s5k5baf_hw_set_stream(state, 1);
>> + s5k5baf_i2c_write(state, 0xb0cc, 0x000b);
>> +
>> + if (!state->error)
>> + state->streaming = 1;
> state->streaming seems to never be cleared in this callback, only
> on power off.
>
> How about rewriting it as:
>
> if (!on) {
> s5k5baf_hw_set_config(state);
> s5k5baf_hw_set_stream(state, 1);
> s5k5baf_i2c_write(state, 0xb0cc, 0x000b);
> } else {
> s5k5baf_hw_set_stream(state, 0);
> }
> if (!state->error)
> state->streaming = 1;
>
> without an ugly as hell 'goto' ? :-)
OK
>
>> +
>> +out:
>> + ret = s5k5baf_clear_error(state);
>> + mutex_unlock(&state->lock);
>> +
>> + return ret;
>> +}
>> +
>> +static int s5k5baf_g_frame_interval(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_frame_interval *fi)
>> +{
>> + struct s5k5baf *state = to_s5k5baf(sd);
>> +
>> + mutex_lock(&state->lock);
>> + fi->interval.numerator = state->fiv;
>> + fi->interval.denominator = 10000;
>> + mutex_unlock(&state->lock);
>> +
>> + return 0;
>> +}
>> +
>> +static void s5k5baf_set_frame_interval(struct s5k5baf *state,
>> + struct v4l2_subdev_frame_interval *fi)
>> +{
>> + struct v4l2_fract *i = &fi->interval;
>> +
>> + if (fi->interval.denominator == 0)
>> + state->req_fiv = S5K5BAF_MAX_FR_TIME;
>> + else
>> + state->req_fiv = clamp_t(u32,
>> + i->numerator * 10000 / i->denominator,
>> + S5K5BAF_MIN_FR_TIME,
>> + S5K5BAF_MAX_FR_TIME);
>> +
>> + state->fiv = state->req_fiv;
>> + if (state->apply_cfg) {
>> + s5k5baf_hw_set_fiv(state, state->req_fiv);
>> + s5k5baf_hw_validate_cfg(state);
>> + }
>> + *i = (struct v4l2_fract){state->fiv, 10000};
> I find it more readable with spaces inside {}
>
> *i = (struct v4l2_fract){ state->fiv, 10000 };
OK
>
>> + if (state->fiv == state->req_fiv)
>> + v4l2_info(&state->sd, "frame interval changed to %d00us\n",
>> + state->fiv);
>> +}
>> +
>> +static int s5k5baf_s_frame_interval(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_frame_interval *fi)
>> +{
>> + struct s5k5baf *state = to_s5k5baf(sd);
>> +
>> + mutex_lock(&state->lock);
>> + s5k5baf_set_frame_interval(state, fi);
>> + mutex_unlock(&state->lock);
>> + return 0;
>> +}
>> +
>> +/*
>> + * V4L2 subdev pad level and video operations
>> + */
>> +static int s5k5baf_enum_frame_interval(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_fh *fh,
>> + struct v4l2_subdev_frame_interval_enum *fie)
>> +{
>> + if (fie->index > S5K5BAF_MAX_FR_TIME - S5K5BAF_MIN_FR_TIME ||
>> + fie->pad != 0)
>> + return -EINVAL;
>> +
>> + v4l_bound_align_image(&fie->width, S5K5BAF_WIN_WIDTH_MIN,
>> + S5K5BAF_CIS_WIDTH, 1,
>> + &fie->height, S5K5BAF_WIN_HEIGHT_MIN,
>> + S5K5BAF_CIS_HEIGHT, 1, 0);
>> +
>> + fie->interval.numerator = S5K5BAF_MIN_FR_TIME + fie->index;
>> + fie->interval.denominator = 10000;
>> +
>> + return 0;
>> +}
>> +
>> +static int s5k5baf_enum_mbus_code(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_fh *fh,
>> + struct v4l2_subdev_mbus_code_enum *code)
>> +{
>> + if (code->pad == 0) {
>> + if (code->index > 0)
>> + return -EINVAL;
>> + code->code = V4L2_MBUS_FMT_FIXED;
>> + return 0;
>> + }
>> +
>> + if (code->index >= ARRAY_SIZE(s5k5baf_formats))
>> + return -EINVAL;
>> +
>> + code->code = s5k5baf_formats[code->index].code;
>> + return 0;
>> +}
>> +
>> +static int s5k5baf_enum_frame_size(struct v4l2_subdev *sd,
>> + struct v4l2_subdev_fh *fh,
>> + struct v4l2_subdev_frame_size_enum *fse)
>> +{
>> + int i;
>> +
>> + if (fse->index > 0)
>> + return -EINVAL;
>> +
>> + if (fse->pad == 0) {
>> + fse->code = V4L2_MBUS_FMT_FIXED;
>> + fse->min_width = S5K5BAF_CIS_WIDTH;
>> + fse->max_width = S5K5BAF_CIS_WIDTH;
>> + fse->min_height = S5K5BAF_CIS_HEIGHT;
>> + fse->max_height = S5K5BAF_CIS_HEIGHT;
>> + return 0;
>> + }
>> +
>> + i = ARRAY_SIZE(s5k5baf_formats);
>> + while (--i)
>> + if (fse->code == s5k5baf_formats[i].code)
>> + break;
>> + fse->code = s5k5baf_formats[i].code;
>> + fse->min_width = S5K5BAF_WIN_WIDTH_MIN;
>> + fse->max_width = S5K5BAF_CIS_WIDTH;
>> + fse->max_height = S5K5BAF_WIN_HEIGHT_MIN;
>> + fse->min_height = S5K5BAF_CIS_HEIGHT;
>> +
>> + return 0;
>> +}
>> +
>> +static void s5k5baf_try_cis_format(struct v4l2_mbus_framefmt *mf)
>> +{
>> + mf->width = S5K5BAF_CIS_WIDTH;
>> + mf->height = S5K5BAF_CIS_HEIGHT;
>> + mf->code = V4L2_MBUS_FMT_FIXED;
>> + mf->colorspace = V4L2_COLORSPACE_JPEG;
>> + mf->field = V4L2_FIELD_NONE;
>> +}
>> +
>> +static int s5k5baf_try_isp_format(struct v4l2_mbus_framefmt *mf)
>> +{
>> + int pixfmt;
>> +
>> + v4l_bound_align_image(&mf->width, S5K5BAF_WIN_WIDTH_MIN,
>> + S5K5BAF_CIS_WIDTH, 1,
>> + &mf->height, S5K5BAF_WIN_HEIGHT_MIN,
>> + S5K5BAF_CIS_HEIGHT, 1, 0);
>> +
>> + pixfmt = s5k5baf_find_pixfmt(mf);
>> +
>> + mf->colorspace = s5k5baf_formats[pixfmt].colorspace;
>> + mf->code = s5k5baf_formats[pixfmt].code;
>> + mf->field = V4L2_FIELD_NONE;
>> +
>> + return pixfmt;
>> +}
>> +
>> +static int s5k5baf_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh
>> *fh,
>> + struct v4l2_subdev_format *fmt)
>> +{
>> + struct s5k5baf *state = to_s5k5baf(sd);
>> + const struct s5k5baf_pixfmt *pixfmt;
>> + struct v4l2_mbus_framefmt *mf;
>> +
>> + memset(fmt->reserved, 0, sizeof(fmt->reserved));
> I think this should should be moved to v4l2-core/v4l2-subdev.c.
> Not seem to be some drivers that don't clear this field.
> I would just remove this memset from this patch.
OK
>
>> + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
>> + mf = v4l2_subdev_get_try_format(fh, fmt->pad);
>> + fmt->format = *mf;
>> + return 0;
>> + }
>> +
>> + mf = &fmt->format;
>> + if (fmt->pad == 0) {
>> + s5k5baf_try_cis_format(mf);
>> + return 0;
>> + }
>> + mf->field = V4L2_FIELD_NONE;
>> + mutex_lock(&state->lock);
>> + pixfmt = &s5k5baf_formats[state->pixfmt];
>> + mf->width = state->crop_source.width;
>> + mf->height = state->crop_source.height;
>> + mf->code = pixfmt->code;
>> + mf->colorspace = pixfmt->colorspace;
>> + mutex_unlock(&state->lock);
>> +
>> + return 0;
>> +}
>> +
>> +static int s5k5baf_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh
>> *fh,
>> + struct v4l2_subdev_format *fmt)
>> +{
>> + struct v4l2_mbus_framefmt *mf = &fmt->format;
>> + struct s5k5baf *state = to_s5k5baf(sd);
>> + const struct s5k5baf_pixfmt *pixfmt;
>> + int ret = 0;
>> +
>> + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
>> + *v4l2_subdev_get_try_format(fh, fmt->pad) = *mf;
>> + return 0;
>> + }
>> +
>> + if (fmt->pad == 0) {
>> + s5k5baf_try_cis_format(mf);
>> + return 0;
>> + }
>> +
>> + mutex_lock(&state->lock);
>> +
>> + if (state->streaming) {
>> + ret = -EBUSY;
>> + goto out;
> It might be a matter of taste, but I think that 'goto' is not
> justified here.
OK
>
>> + }
>> +
>> + state->pixfmt = s5k5baf_try_isp_format(mf);
>> + pixfmt = &s5k5baf_formats[state->pixfmt];
>> + mf->code = pixfmt->code;
>> + mf->colorspace = pixfmt->colorspace;
>> + mf->width = state->crop_source.width;
>> + mf->height = state->crop_source.height;
>> +
>> +out:
>> + mutex_unlock(&state->lock);
>> +
>> + return ret;
>> +}
>> +
>> +enum selection_rect {R_CIS, R_CROP_SINK, R_COMPOSE, R_CROP_SOURCE,
>> R_INVALID};
> Could you add spaces around { } ?
OK
>
>> +static enum selection_rect s5k5baf_get_sel_rect(u32 pad, u32 target)
>> +{
>> + switch (target) {
>> + case V4L2_SEL_TGT_CROP_BOUNDS:
>> + return pad ? R_COMPOSE : R_CIS;
>> + case V4L2_SEL_TGT_CROP:
>> + return pad ? R_CROP_SOURCE : R_CROP_SINK;
>> + case V4L2_SEL_TGT_COMPOSE_BOUNDS:
>> + return pad ? R_INVALID : R_CROP_SINK;
>> + case V4L2_SEL_TGT_COMPOSE:
>> + return pad ? R_INVALID : R_COMPOSE;
>> + default:
>> + return R_INVALID;
>> + }
>> +}
>> +
>> +static int s5k5baf_is_bound_tgt(u32 target)
> nit: s5k5baf_is_bounds_target() ?
OK
>
>> +{
>> + return (target == V4L2_SEL_TGT_CROP_BOUNDS ||
>> + target == V4L2_SEL_TGT_COMPOSE_BOUNDS);
>> +}
>> +
> [...]
>> +/*
>> + * V4L2 subdev controls
>> + */
>> +
>> +static int s5k5baf_s_ctrl(struct v4l2_ctrl *ctrl)
>> +{
>> + struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
>> + struct s5k5baf *state = to_s5k5baf(sd);
>> + int ret;
>> +
>> + v4l2_dbg(1, debug, sd, "ctrl: %s, value: %d\n", ctrl->name, ctrl->val);
>> +
>> + mutex_lock(&state->lock);
>> +
>> + if (state->power == 0)
>> + goto unlock;
>> +
>> + switch (ctrl->id) {
>> + case V4L2_CID_AUTO_WHITE_BALANCE:
>> + s5k5baf_hw_set_awb(state, ctrl->val);
>> + break;
>> +
>> + case V4L2_CID_BRIGHTNESS:
>> + s5k5baf_write(state, REG_USER_BRIGHTNESS, ctrl->val);
>> + break;
>> +
>> + case V4L2_CID_COLORFX:
>> + s5k5baf_hw_set_colorfx(state, ctrl->val);
>> + break;
>> +
>> + case V4L2_CID_CONTRAST:
>> + s5k5baf_write(state, REG_USER_CONTRAST, ctrl->val);
>> + break;
>> +
>> + case V4L2_CID_EXPOSURE_AUTO:
>> + s5k5baf_hw_set_auto_exposure(state, ctrl->val);
>> + break;
>> +
>> + case V4L2_CID_HFLIP:
>> + s5k5baf_hw_set_mirror(state, ctrl->val);
>> + break;
>> +
>> + case V4L2_CID_POWER_LINE_FREQUENCY:
>> + s5k5baf_hw_set_anti_flicker(state, ctrl->val);
>> + break;
>> +
>> + case V4L2_CID_SATURATION:
>> + s5k5baf_write(state, REG_USER_SATURATION, ctrl->val);
>> + break;
>> +
>> + case V4L2_CID_SHARPNESS:
>> + s5k5baf_write(state, REG_USER_SHARPBLUR, ctrl->val);
>> + break;
>> +
>> + case V4L2_CID_WHITE_BALANCE_TEMPERATURE:
>> + s5k5baf_write(state, REG_P_COLORTEMP(0), ctrl->val);
>> + if (state->apply_cfg)
>> + s5k5baf_hw_sync_cfg(state);
>> + break;
>> +
>> + case V4L2_CID_TEST_PATTERN:
>> + s5k5baf_hw_set_test_pattern(state, ctrl->val);
>> + break;
>> + }
>> +unlock:
>> + ret = s5k5baf_clear_error(state);
>> + mutex_unlock(&state->lock);
>> + return ret;
>> +}
>> +
>> +static const struct v4l2_ctrl_ops s5k5baf_ctrl_ops = {
>> + .s_ctrl = s5k5baf_s_ctrl,
>> +};
>> +
>> +static const char * const s5k5baf_test_pattern_menu[] = {
>> + "Disabled",
>> + "Blank",
>> + "Bars",
>> + "Gradients",
>> + "Textile",
>> + "Textile2",
>> + "Squares"
>> +};
>> +
>> +static int s5k5baf_initialize_ctrls(struct s5k5baf *state)
>> +{
>> + const struct v4l2_ctrl_ops *ops = &s5k5baf_ctrl_ops;
>> + struct s5k5baf_ctrls *ctrls = &state->ctrls;
>> + struct v4l2_ctrl_handler *hdl = &ctrls->handler;
>> + int ret;
>> +
>> + ret = v4l2_ctrl_handler_init(hdl, 16);
> You seem to have at least 18 controls.
OK
>
>> + if (ret) {
>> + v4l2_err(&state->sd, "cannot init ctrl handler (%d)\n", ret);
>> + return ret;
>> + }
>> +
>> + /* Auto white balance cluster */
>> + ctrls->awb = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTO_WHITE_BALANCE,
>> + 0, 1, 1, 1);
>> + ctrls->gain_red = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_RED_BALANCE,
>> + 0, 255, 1, S5K5BAF_GAIN_RED_DEF);
>> + ctrls->gain_blue = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BLUE_BALANCE,
>> + 0, 255, 1, S5K5BAF_GAIN_BLUE_DEF);
>> + v4l2_ctrl_auto_cluster(3, &ctrls->awb, 0, false);
>> +
>> + ctrls->hflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP, 0, 1, 1, 0);
>> + ctrls->vflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP, 0, 1, 1, 0);
>> + v4l2_ctrl_cluster(2, &ctrls->hflip);
>> +
>> + ctrls->auto_exp = v4l2_ctrl_new_std_menu(hdl, ops,
>> + V4L2_CID_EXPOSURE_AUTO,
>> + V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO);
>> + /* Exposure time: x 1 us */
>> + ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE,
>> + 0, 6000000U, 1, 100000U);
>> + /* Total gain: 256 <=> 1x */
>> + ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN,
>> + 0, 256, 1, 256);
>> + v4l2_ctrl_auto_cluster(3, &ctrls->auto_exp, 0, false);
>> +
>> + v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_POWER_LINE_FREQUENCY,
>> + V4L2_CID_POWER_LINE_FREQUENCY_AUTO, 0,
>> + V4L2_CID_POWER_LINE_FREQUENCY_AUTO);
>> +
>> + v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_COLORFX,
>> + V4L2_COLORFX_SKY_BLUE, ~0x6f, V4L2_COLORFX_NONE);
>> +
>> + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_WHITE_BALANCE_TEMPERATURE,
>> + 0, 256, 1, 0);
>> +
>> + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION, -127, 127, 1, 0);
>> + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -127, 127, 1, 0);
>> + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -127, 127, 1, 0);
>> + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS, -127, 127, 1, 0);
>> +
>> + v4l2_ctrl_new_std_menu_items(hdl, ops, V4L2_CID_TEST_PATTERN,
>> + ARRAY_SIZE(s5k5baf_test_pattern_menu) - 1,
>> + 0, 0, s5k5baf_test_pattern_menu);
>> +
>> + if (hdl->error) {
>> + v4l2_err(&state->sd, "error creating controls (%d)\n",
>> + hdl->error);
>> + ret = hdl->error;
>> + v4l2_ctrl_handler_free(hdl);
>> + return ret;
>> + }
>> +
>> + state->sd.ctrl_handler = hdl;
>> + return 0;
>> +}
>> +
>> +/*
>> + * V4L2 subdev internal operations
>> + */
>> +static int s5k5baf_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
>> +{
>> + struct v4l2_mbus_framefmt *mf;
>> + struct v4l2_rect *r;
>> +
>> + mf = v4l2_subdev_get_try_format(fh, 0);
>> + s5k5baf_try_cis_format(mf);
>> +
>> + if (s5k5baf_is_cis_subdev(sd))
>> + return 0;
>> +
>> + mf = v4l2_subdev_get_try_format(fh, 1);
>> + mf->colorspace = s5k5baf_formats[0].colorspace;
>> + mf->code = s5k5baf_formats[0].code;
>> + mf->width = s5k5baf_def_rect.width;
>> + mf->height = s5k5baf_def_rect.height;
>> + mf->field = V4L2_FIELD_NONE;
>> +
>> + *v4l2_subdev_get_try_crop(fh, 0) = s5k5baf_cis_rect;
>> + r = v4l2_subdev_get_try_compose(fh, 0);
>> + *r = s5k5baf_def_rect;
>> + *v4l2_subdev_get_try_crop(fh, 1) = *r;
>> +
>> + return 0;
>> +}
>> +
>> +static void s5k5baf_check_fw_revision(struct s5k5baf *state)
>> +{
>> + u16 api_ver = 0, fw_rev = 0, s_id = 0;
>> +
>> + api_ver = s5k5baf_read(state, REG_FW_APIVER);
>> + fw_rev = s5k5baf_read(state, REG_FW_REVISION) & 0xff;
>> + s_id = s5k5baf_read(state, REG_FW_SENSOR_ID);
>> + if (state->error)
>> + return;
>> +
>> + v4l2_info(&state->sd, "FW API=%#x, revision=%#x sensor_id=%#x\n",
>> + api_ver, fw_rev, s_id);
>> +
>> + if (api_ver == S5K5BAF_FW_APIVER)
>> + return;
>> +
>> + v4l2_err(&state->sd, "FW API version not supported\n");
>> + state->error = -ENODEV;
>> +}
>> +
>> +static int s5k5baf_registered(struct v4l2_subdev *sd)
>> +{
>> + struct s5k5baf *state = to_s5k5baf(sd);
>> + int ret;
>> +
>> + ret = v4l2_device_register_subdev(sd->v4l2_dev, &state->cis_sd);
>> + if (ret) {
>> + v4l2_err(sd, "failed to register subdev %s\n",
>> + state->cis_sd.name);
>> + return ret;
>> + }
>> +
>> + mutex_lock(&state->lock);
>> +
>> + s5k5baf_power_on(state);
>> + s5k5baf_hw_init(state);
>> + s5k5baf_check_fw_revision(state);
>> + s5k5baf_power_off(state);
>> + ret = s5k5baf_clear_error(state);
>
> After the exynos4-is is converted to the asynchronous subdev probing
> API this H/W revision probing could be moved to probe. For the final
> version of this driver the async API support will need to be added to
> this driver.
OK
>
>> + mutex_unlock(&state->lock);
>> +
>> + if (ret)
>> + v4l2_device_unregister_subdev(&state->cis_sd);
>> +
>> + return ret;
>> +}
>> +
>> +static void s5k5baf_unregistered(struct v4l2_subdev *sd)
>> +{
>> + struct s5k5baf *state = to_s5k5baf(sd);
>> + v4l2_device_unregister_subdev(&state->cis_sd);
>> +}
>> +
> [...]
>> +static int s5k5baf_parse_device_node(struct s5k5baf *state, struct device
>> *dev)
>> +{
>> + struct device_node *node = dev->of_node;
>> + struct device_node *node_ep;
>> + struct v4l2_of_endpoint ep;
>> + int ret;
>> +
>> + if (!node) {
>> + dev_err(dev, "no device-tree node provided\n");
>> + return -EINVAL;
>> + }
>> +
>> + of_property_read_u32(node, "clock-frequency", &state->mclk_frequency);
>> + state->hflip = of_property_read_bool(node, "samsung,hflip");
>> + state->vflip = of_property_read_bool(node, "samsung,vflip");
>> + ret = s5k5baf_parse_gpio(&state->gpios[STBY], node, STBY);
>> + if (ret) {
>> + dev_err(dev, "no standby gpio pin provided\n");
>> + return -EINVAL;
>> + }
>> + ret = s5k5baf_parse_gpio(&state->gpios[RST], node, RST);
>> + if (ret) {
>> + dev_err(dev, "no reset gpio pin provided\n");
>> + return -EINVAL;
>> + }
>> +
>> + node_ep = v4l2_of_get_next_endpoint(node, NULL);
>> + if (!node_ep) {
>> + dev_err(dev, "no endpoint defined\n");
> nit:
> dev_err(dev, "no endpoint defined at node %s\n",
> node->full_name);
> ?
OK
>> + return -EINVAL;
>> + }
> nit: an empty line here ?
OK
>
>> + v4l2_of_parse_endpoint(node_ep, &ep);
>> + of_node_put(node_ep);
>> + state->bus_type = ep.bus_type;
>> + if (state->bus_type == V4L2_MBUS_CSI2)
>> + state->nlanes = ep.bus.mipi_csi2.num_data_lanes;
>> + return 0;
>> +}
>> +
>> +static int s5k5baf_configure_subdevs(struct s5k5baf *state,
>> + struct i2c_client *c)
>> +{
>> + struct v4l2_subdev *sd;
>> + int ret;
>> +
>> + sd = &state->cis_sd;
>> + v4l2_subdev_init(sd, &s5k5baf_cis_subdev_ops);
>> + sd->owner = c->driver->driver.owner;
> It could be simplified to:
>
> sd->owner = THIS_MODULE;
>
OK
>> + v4l2_set_subdevdata(sd, state);
>> + strlcpy(sd->name, "S5K5BAF-CIS", sizeof(sd->name));
> I think we need instead something like:
>
> snprintf(sd->name, sizeof(sd->name), "%s %d-%04x",
> "S5K5BAF-CIS", i2c_adapter_id(c->adapter), c->addr);
OK
>> + sd->internal_ops = &s5k5baf_cis_subdev_internal_ops;
>> + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
>> +
>> + state->cis_pad.flags = MEDIA_PAD_FL_SOURCE;
>> + sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;
>> + ret = media_entity_init(&sd->entity, 1, &state->cis_pad, 0);
>> + if (ret)
>> + goto err;
>> +
>> + sd = &state->sd;
>> + v4l2_i2c_subdev_init(sd, c, &s5k5baf_subdev_ops);
>> + strlcpy(sd->name, "S5K5BAF-ISP", sizeof(sd->name));
> Ditto.
OK
>
>> + sd->internal_ops = &s5k5baf_subdev_internal_ops;
>> + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
>> +
>> + state->pads[0].flags = MEDIA_PAD_FL_SINK;
>> + state->pads[1].flags = MEDIA_PAD_FL_SOURCE;
> Might be a good idea to create some enum/macros to those pad indexes.
OK
>
>> + sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV;
>> + ret = media_entity_init(&sd->entity, 2, state->pads, 0);
> And for the number of pads too.
OK
>> + if (ret)
>> + goto err_cis;
>> +
>> + ret = media_entity_create_link(&state->cis_sd.entity,
>> + 0, &state->sd.entity, 0,
>> + MEDIA_LNK_FL_IMMUTABLE |
>> + MEDIA_LNK_FL_ENABLED);
> This link needs now to be created in .registered callback, so it
> is re-created after this subdev gets unregistered from the host
> and the state->cis_sd.entity links get removed.
OK
>
>> + if (!ret)
>> + return 0;
>> +
>> + media_entity_cleanup(&state->sd.entity);
>> +err_cis:
>> + media_entity_cleanup(&state->cis_sd.entity);
>> +err:
>> + dev_err(&c->dev, "cannot init media entity %s\n", sd->name);
>> + return ret;
>> +}
> [...]
>> +
>> +MODULE_DESCRIPTION("Samsung S5K5BAF(X) UXGA camera driver");
>> +MODULE_AUTHOR("Andrzej Hajda <a.ha...@samsung.com>");
>> +MODULE_LICENSE("GPL");
> I think this should be "GPL v2".
OK
Regards
Andrzej
>
> Otherwise it look pretty good! And more importantly the overall
> image quality is much better than with the s5k6aa driver for
> a similar sensor. :)
>
> Thanks,
> Sylwester
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
